Abstract
Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Brydone, A.S., Meek, D., Maclaine, S.: Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering. Proceedings of Inst. Mech. Eng. H 224, 1329–1343 (2010)
Arbabtafti, M., Moghaddam, M., Nahvi, A., et al.: Physics-based haptic simulation of bone machining. IEEE Transactions on Haptics 4(1), 39–50 (2011)
Hsieh, M.S., Tsai, M.D., Yeh, Y.: An amputation simulator with bone sawing haptic interaction. Biomedical Engineering: Applications, Basis and Communications 18, 229–236 (2006)
Agus, M.: Haptic and visual simulation of bone dissection. Ph.D. Thesis, Universita degli Studi di Cagliari, Italy (2004)
Wang, Q., Chen, H., Wu, J.H., et al.: Dynamic touch-enable bone drilling interaction. In: 5th International Conference on Information Technology and Applications in Biomedicine, Shenzhen, China, pp. 457–460 (2008)
Jacobs, C.H., Pope, M.H., Berry, J.T., et al.: A study of the bone machining process orthogonal cutting. Journal of Biomechanics 7(2), 131–136 (1974)
Plaskos, C., Hodgson, A.J., Cinquin, P.: Modelling and optimization of bone-cutting forces in orthopaedic surgery. In: Ellis, R.E., Peters, T.M. (eds.) MICCAI 2003. LNCS, vol. 2878, pp. 254–261. Springer, Heidelberg (2003)
Ong, F.R., Bouazza-Marouf, K.: Evaluation of bone strength: Correlation between measurements of bone mineral density and drilling force. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine 214(4), 385–399 (2000)
Schwartz-Dabney, C.L., Dechow, P.C.: Variations in cortical material properties throughout the human dentate mandible. American Journal of Physical Anthropology 120, 252–277 (2003)
Seong, W.J., Kim, U.K., Swift, J.: Elastic properties and apparent density of human edentulous maxilla and mandible. International Journal of Oral and Maxillofacial Surgery 38, 1088–1093 (2009)
Misch, C.E., Qu, Z., Bidez, M.W.: Mechanical properties of trabecular bone in the human mandible: implications for dental implant treatment planning and surgical placement. Journal of Oral and Maxillofacial Surgery 57(6), 700–706 (1999)
Van Eijden, T.M.: Biomechanics of the mandible. Critical Reviews in Oral Biology and Medicine 11, 123–136 (2000)
Nomura, T., Gold, E., Powers, M.P., et al.: Micromechanics/structure relationships in the human mandible. Dental Materials 19, 167–173 (2003)
Gerressen, M., Zadeh, M.D., Stockbrink, G., et al.: The functional long-term results after bilateral sagittal split osteotomy (BSSO) with and without a condylar positioning device. Journal of Oral and Maxillofacial Surgery 64, 1624–1630 (2006)
Boothroyd, G., Knight, W.A.: Fundamentals of Machining and Machine Tools. Marcel Dekker, New York (1989)
Groover, M.P.: Fundamentals of Modern Manufacturing: Materials, Processes and Systems, 4th edn. Wiley, New York (2010)
Sofronia, R., Knott, T., Davidescu, A., Savii, G., Kuhlen, T., Gerressen, M.: Failure mode and effects analysis in designing a virtual reality-based training simulator for bilateral sagittal split osteotomy, International Journal of Medical Robotics and Computer Assisted Surgery 9(1), e1–9 (2013)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Knott, T.C. et al. (2014). Preliminary Bone Sawing Model for a Virtual Reality-Based Training Simulator of Bilateral Sagittal Split Osteotomy. In: Bello, F., Cotin, S. (eds) Biomedical Simulation. ISBMS 2014. Lecture Notes in Computer Science, vol 8789. Springer, Cham. https://doi.org/10.1007/978-3-319-12057-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-12057-7_1
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-12056-0
Online ISBN: 978-3-319-12057-7
eBook Packages: Computer ScienceComputer Science (R0)