Abstract
In this chapter, the use of genetic algorithm (GA) is investigated in the field of estimating ultrasonic (US) propagation parameters. Recent works are, then, surveyed showing an ever-spread of employing GA in different applications of US. A GA is, specifically, used to estimate the propagation parameters of US waves in polycrystalline and composite materials for different applications. The objective function of the estimation is the minimization of a rational difference error between the estimated and measured transfer functions of US-wave propagation. The US propagation parameters may be the phase velocity and attenuation. Based on tentative experiments, we will demonstrate how the evolution operators and parameters of GA can be chosen for modeling of US propagation. The GA-based estimation is applied, in a test experiment, on steel alloy and Aluminum specimens with different grain sizes. Comparative results of that experiment are presented on different evolution operators for less estimation errors and complexity. The results prove the effectiveness of GA in estimating parameters for US propagation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Back, T., Hammel, U., Schwefel, H.: Evolutionary computation: Comments on the history and current state. Evol. Comput. IEEE Trans. 1(1), 3–17 (1997)
Beasley, D., Martin, R., Bull, D.: An overview of genetic algorithms: part 1. Fundamentals. Univ. Comput. 15(2), 58–69 (1993)
Beasley, D., Martin, R., Bull, D.: An overview of genetic algorithms: part 2. Fundamentals. Univ. Comput. 15(4), 170–181 (1993)
Blickle, T., Thiele, L.: A comparison of selection schemes used in genetic algorithms. TIK-Report, no. 11, Swiss Federal Institute of Technology, (ETCH), Switzerland, Dec 1995
Bustillo, J., Fortineau, J., Gautier, G., Lethiecq, M.: Ultrasonic characterization of porous silicon using a genetic algorithm to solve the inverse problem. NDT & E Int. 62, 93–98 (2014)
Delsanto, P.P.: Universality of nonclassical nonlinearity. In: Delsanto, S., Griffa, S., Morra, L. (eds.) Inverse Problems and Genetic Algorithms, pp. 349–366. Springer, New York (2006)
Elangovan, S., Anand, K., Prakasan, K.: Parametric optimization of ultrasonic metal welding using response surface methodology and genetic algorithm. Int. J. Adv. Manufact. Technol. 63(5–8), 561–572 (2012)
Hassanien, A., Hesham, M., Nour El-Din, A.M.: Grain-size effect on the attenuation and dispersion of ultrasonic waves. J. Eng. Appl. Sci. 46(3), 401–411 (1999)
Hesham, M.: Efficient evolution operators for estimating ultrasonic propagation parameters using genetic algorithms. Ain Shams Eng. J. 36(2), 517–532 (2001)
Hesham, M., Hassanien, A.: A genetic algorithm for polycrystalline material identification using ultrasonics, Egypt. J. Phys. 31(2), pp. 149–161 (2000)
Kinra, V., Dayal, V.: A new technique for ultrasonic-nondestructive evaluation of thin specimens. Exp. Mech. 28(3), 288–297 (1988)
Kodali, S.P., Bandaru, S., Deb, K., Munshi, P., Kishore, N.N.: Applicability of genetic algorithms to reconstruction of projected data from ultrasonic tomography. In: C. Ryan, M. Keijzer (eds.), ‘GECCO’, ACM, pp. 1705–1706
Krautkrämer, J., Krautkrämer, H.: Ultrasonic Testing of Materials. Springer, Berlin (1969)
Kristinsson, K., Dumont, G.A.: System identification and control using genetic algorithms. Syst. Man Cybern. IEEE Trans. 22(5), 1033–1046 (1992)
Kuttruff, H.: Ultrasonics Fundamentals and Applications. Elsevier Applied Science, London (1991)
Luo, Z., Zhu, H., Chu, J., Shen, L., Hu, L.: Strain measurement by ultrasonic speckle technique based on adaptive genetic algorithm. J. Strain Anal. Eng. Des. 48(7), 446–456 (2013)
Nour-El-Din, A.M.: Attenuation and dispersion of ultrasonic waves in metals. M.Sc. thesis, Faculty of Engineering, Cairo University, May 1997
O’Donnell, M., Jaynes, E., Miller, J.: Kramers-Kronig relationship between ultrasonic attenuation and phase velocity. J. Acoust. Soc. Am. 69(3), 696–701 (1981)
Peirlinckx, L., Pintelon, R., Van Biesen, L.: Identification of parametric models for ultrasonic wave propagation in the presence of absorption and dispersion. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 40(4), 302–312 (1993)
Puthillath, P., Krishnamurthy, C., Balasubramaniam, K.: Hybrid inversion of elastic moduli of composite plates from ultrasonic transmission spectra using PVDF plane wave sensor. Compos. B Eng. 41(1), 8–16 (2010)
Ramuhalli, P., Polikar, R., Udpa, L., Udpa, S.S.: Fuzzy ARTMAP network with evolutionary learning, Acoustics, Speech, and Signal Processing. In: Proceedings of IEEE International Conference on ICASSP‘00, 6, pp. 3466–3469 (2000)
Rosenberger, C., Chehdi, K.: Genetic fusion: application to multi-components image segmentation, Acoustics, Speech, and Signal Processing. In: Proceedings of IEEE International Conference on ICASSP‘00, 4, pp. 2223–2226 (2000)
Sibil, A., Godin, N., R’Mili, M., Maillet, E., Fantozzi, G.: Optimization of acoustic emission data clustering by a genetic algorithm method. J. Nondestr. Eval. 31(2), 169–180 (2012)
Spears, W.M.: Adapting crossover in a genetic algorithm, Navy Center for Applied Research in Artificial Intelligence, (NCARAI) Naval Reaserch Lab., pp. 20375–5000, Washington, DC (1992)
Sun, K., Hong, K., Yuan, L., Shen, Z., Ni, X.: Inversion of functional graded materials elastic properties from ultrasonic lamb wave phase velocity data using genetic algorithm. J. Nondestr. Eval. 33, 34–42 (2013)
Tavakolpour, A.R., Mat Darus, I.Z., Tokhi, O., Mailah, M.: Genetic algorithm-based identification of transfer function parameters for a rectangular flexible plate system. Eng. Appl. Artif. Intell. 23(8), 1388–1397 (2010)
Toledo, A.R.; Fernández, A.R.; Anthony, D. K.: A comparison of GA objective functions for estimating internal properties of piezoelectric transducers used in medical echo-graphic imaging. Health Care Exchange (PAHCE), 2010 Pan American, vol. 185(190), pp. 15–19, Mar 2010
Vishnuvardhan, J., Krishnamurthy, C., Balasubramaniam, K.: Genetic algorithm reconstruction of orthotropic composite plate elastic constants from a single non-symmetric plane ultrasonic velocity data. Compos. B Eng. 38(2), 216–227 (2007)
Weile, D.S., Michielssen, E.: Genetic algorithm optimization applied to electromagnetics: a review. Antennas Propag. IEEE Trans. 45(3), 343–353 (1997)
Acknowledgment
The author would like to deeply thank Dr. A. A. Hassanien who first taught the concept of NDT at Cairo University and for his contribution to different works lead to this work.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
El-Sayed, M.H.F. (2015). Application of Genetic Algorithms for the Estimation of Ultrasonic Parameters. In: Azar, A., Vaidyanathan, S. (eds) Computational Intelligence Applications in Modeling and Control. Studies in Computational Intelligence, vol 575. Springer, Cham. https://doi.org/10.1007/978-3-319-11017-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-11017-2_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-11016-5
Online ISBN: 978-3-319-11017-2
eBook Packages: EngineeringEngineering (R0)