Abstract
This chapter presents the conclusions of more than four decades of continuous research and development beginning in the early 1970s. It recalls the historical evolution of process control methodologies, which over the years were enhanced as new concepts became incorporated to give ADEX controllers and systems as they are implemented today. It illustrates how the solution to the problems lies in the strength of the new concepts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Afshari A, Fausse A, Sorari SA (1992) Predictive control scheme for automatic management of domestic gas heating. Proceedings of IGRC Conference. Florida, USA, pp 381–391.
Ansay P, Gevers M, Wertz V (1998) Enhancing the robustness of gpc via a simple choice of the youla parameter. Eur J Control 4:64–70
Aguilar JV, Langarita P, Rodellar J (2009) Automatic control of flows and levels in an irrigation canal. IEEE Trans Ind Appl 45(6):2198–2208
Aguilar JV, Langarita P, Linares L, Rodellar J, Soler J (2012) Adaptive predictive expert control of levels in large canals for irrigation water distribution. Int J Adapt Control Signal Process 26(10):945–960
Allgower F, Zheng A (2000) Nonlinear model predictive control. Birkhausser, Boston
Bemporad A, Borrelli F, Morari M (2001) Robust model predictive control: Piecewise linear explicit solution. In: European control conference, ECC’01, 2001.
Bendotti P, M’Saad M (1993) A skid-to-turn missile autopilot design: the generalized predictive adaptive control approach. Int J Adapt Control Signal Process 7(1):13–32
Balderud J, Wilson DI (2002) Application of predictive control to a toy helicopter. IEEE Conference on Control Applications. Glasgow, UK, pp 1125–1229.
Cabanillas A, Bahillo A, Cerezo J (1995) Adaptive predictive control in a bubbling fluidized bed boiler. In: Proceedings of the 3rd European conference on industrial furnaces and boilers, Lisboa, Portugal.
Caldwell JM, Dearwater JG (1991) Model predictive control applied to fcc units. In: Proceedings of the conference on chemical process control (CPCIV), Texas, USA.
Camacho EF, Berenguel M (1993) Application of generalized predictive control to a solar power plant. In: Proceedings of the world congress on advances in model based predictive control, vol 2, pp 182–188, Oxford, UK.
Camacho EF, Berenguel M (1997) Robust adaptive model predictive control of a solar plant with bounded uncertainties. Int J Adapt Control Signal Process 11:311–325
Camacho EF, Bordons C (1999) Model predictive control. Springer, UK
Cannon M, Deshmukh V, Kouvaritakis B (2003) Nonlinear model predictive control with polytopic invariant sets. Automatica 39(8):1487–1494
Cannon M, Kouvaritakis B, Grimble M, Bulut B (2003) Nmpc of hot spring rolling mill. Int J Robust Nonlinear Control 13(3):365–380
Cavanillas A, Alonso F, Riesco F, Martín-Sánchez JM (2005) Evaluation of an adaptive predictive expert control platform in the escombreras refinery (in spanish). In: First IEEE seminar for advanced industrial control applications (SAICA 2005), Madrid, Spain, pp 19–32.
Charos GG, Arkun Y, Taylor RA (1991) Model predictive control of an industrial lime kiln. TAPPI J 74(2):203–211
Chow CM, Kuznetsov AG, Clarke DW (1994) Application of multivariable generalized predictive control to the benchmark paper machine. In: Proceedings of control systems’94, Stockolm, Sweden.
Clarke DW (1988) Application of generalized predictive control to industrial processes. IEEE Control Syst Mag 8:49–55
Clarke DW, Mohtadi C, Tuffs PS (1987) Generalized predictive control. parts i and ii. Automatica 23:137–160
Compas JM, Decarreau P, Lanquetin G, Estival JL, Fulget N, Martin R, Richalet J (1994) Industrial applications of predictive functional control to rolling mill, fast robot, river dam. Proceedings of the 3rd IEEE conference on control applications, vol 3. Glasgow, UK, pp 1643–1655.
Cutler CR, Ramaker BL (1980) Dynamic matrix control: a computer control algorithm. In: Proceedings of joint automatic control conference, San Francisco.
De Keyser RM, Van Cauwenberghe AR (1985) Extended prediction self-adaptive control. In: Proceedings of 7th IFAC symposium on identification and control.
Dittmar R, Ogonowski Z, Damert K (1991) Predictive control of a non-linear open loop unstable polymerization reactor. Chem Eng Sci 46(10):2679–2689
Douas M, Alvarez G, Martín-Sánchez JM (1992) Adaptive predictive control of the first Spanish installation for the official approval of nuclear equipment. In: Proceedings of the Workshop on industrial applications of model based predictive control, Cambridge.
Dufour P, Couenne F, Touré Y (2003) Model predictive control of a catalytic reverse flow reactor. IEEE Trans Control Syst Technol 11(5):705–714
Estrada R, Favela A, Nevado A, Raimondi A, Gracia E (2009) Control of five sulphur recovery units at pemex cadereyta refinery. In: Third IEEE seminar for advanced industrial control applications (SAICA 2009), Madrid, Spain, pp 79–88.
Filatov N, Lemos JM, Unbehauen H (2005) A dual approach to start-up of an adaptive predictive controller. IEEE Trans Control Syst Technol 13(6):877–883
Foss AS (1973) Critique of chemical process control theory. AlChE J 19:209–214
García D, Alvarez G (1990) SCAP optimization and its industrial application (in Spanish). Química e Industria 36:337–342
Gelormino MS, Ricker NL (1994) Model predictive control of a combined sewer system. Int J Control 59(3):793–816
Georgescu C, Afshari A, Bornard G (1993) A model based adaptive predictor fault detection method applied to building heating, ventilating and air conditioning. Proceedings of toolDiag’93. Toulouse, France, pp 1009–1018.
González J, Blanco J, Hermoso M, Uceda M (1993) Automation in olive oil factories (in Spanish). Agricultura 736:930–933
González S, Corzo C, Martín-Sánchez JM (1994) SCAP optimization of cement production. World Cement 25:38–42
Greco C, Menga G, Mosca E, Zappa G (1984) Performance improvements of self-tuning controllers by multistep horizons: the musmar approach. Automatica 20:681–699
Grimble MJ (1993) Long range predictive optimal control law with guaranteed stability for process control applications. J Dyn Syst Meas Contr 115:600–610
Gustafson D, Lebow WM (1987) Model predictive control of injection molding machines. Proceedings of of the 26th Conference on Decision and Control. Los Angeles, USA, pp 2017–2026.
Hasegawa A (1994) Development of a strip temperature control system with adaptive generalized predictive control. Proceedings of 3rd IEEE conference on control applications, vol 3. Glasgow, UK, pp 1525–1531
Henson MA (1998) Nonlinear model predictive control: current status and the future directions. Comput Chem Eng 23:187–202
Huzmezan M, Dumont GA, Gough WA, Kovac S (2003) Adaptive control of delayed integrating systems: a PVC batch reactor. IEEE Trans Control Syst Technol 11(3):390–398
Houston WE, Schork F (1987) Adaptive predictive control of a semibatch polymerization reactor. Polym Process Eng 5:119
Jarupintusophon P, Lelann MV, Cabassud M, Casamatta G (1994) Realistic model based predictive and adaptive control of batch reactors. Comput Chem Eng 18:445–461
Kandare G, Nevado A (2011) Adaptive predictive expert control of the dissolved oxygen concentration in a wastewater treatment plant. Water Science and Technology, 2011. ISSN: 0273–1223.
Kandare G, Viudez D, del Olmo FH (2012) Adaptive control of oxidation ditch reactors in a wastewater treatment plan. Int J Adapt Control Signal Process 26(10):976–989
Kansha Y, Chiu M (2009) Adaptive generalized predictive control based on jitl technique. J Process Control 19:1067–1072
Kawahara M, Shimada Y (1994) A predictive control method to operate the water gate of a dam. Comput Methods Appl Mech Eng 112:199–218
Kim YH, Kwon WH (1998) An application of min-max generaized predictive control to sintering processes. Control Eng Pract 6:999–1007
Kwon WH, Han S (2005) Receding horizon control. Springer, Germany
Lee KS, Chin IS, Lee HJ, Lee JH (2000) Model predictive control techniques combined with iterative learning for batch processes. AIChE J 45:2175–2187
Lee JH, Yu Z (1997) Worst-case formulation of model predictive control for systems with bounded parameters. Automatica 35(5):763–781
Lemos JM, Machado F, Nogueira N, Rato L, Rijo M (2009) Adaptive and non-adaptive model predictive control of an irrigation channel. Networks Heterogen Media 4(2):303–324
Lim KW, Ling KV (1989) Generalized predictive control of a heat exchanger. IEEE Control Syst Mag 9:9–12
Linkens DA, Mahfouf M (1992) Generalized predictive control with feedforward (gpcf) for multivariable anaesthesia. Int J of Control 56(5):1039–1058
Liu GP, Daley S (2001) Adaptive predictive control of combustor nox emissions. Control Eng Pract 9(6):631–638
Maciejowski JM (2002) Predictive control with constraints. Prentice Hall, UK
Magni L, De Nicolao G, Magnani L, Scattolini R (2001) A stabilizing model-based predictive control algorithm for nonlinear systems. Automatica 37:1351–1362
Malia J, Calvo J, Martıin-Sánchez JM (2002) Control adaptativo predictivo experto (ADEX) de plantas depuradoras de aguas residuales. Tecnología del Agua 22(224):52–66
Manayathara T, Bentsman J, Pellegrinetti G (1994) Application of stabilizing predictive control to boilers. Proceedings of the 3rd IEEE conference on control applications, vol 3. Glasgow, UK, pp 1637–1642.
Martín-Sánchez JM (2012) Editorial: special issue on industrial optimized adaptive control. Int J Adapt Control Signal Process 26(10):879–880
Martín-Sánchez JM, Gurumurthy M, Krishnaswamy S (1994) Adaptive predictive control system for process optimization of cement industry. In: Proceedings of the fourth international seminar for cement and building materials, vol 2. New Delhi, pp 33–42.
Martín J, Lorenzo JL, Martín-Sánchez JM (1999) Adaptive predictive control in intelligent buildings. In: 16th IAARC/IFAC/IEEE international symposium, Madrid, Spain pp 37–44.
Martín-Sánchez JM, Pastor H (1997) SCAP Optimization of Cement Kilns. Indian Cement Industry Desk Book 6(6):11–17
Martínez M, Pastor H, Martín-Sánchez JM (1998) Sistemas SCAP. Análisis comparativo y aplicación. Cemento y Hormigón 790:1155–1166
Martín-Sánchez JM, Rodellar J (1996) Adaptive predictive control: from the concepts to plant optimization. Prentice Hall, New Jersy
Martín-Sánchez JM, Rodellar J (1997) Adaptive predictive control: limits of stability. Int J Adapt Control Signal Process 11:263–284
Martín-Sánchez JM, Rodellar J (2005) Adaptive predictive expert control: methodology, design and application (in Spanish), UNED.
Mayne DQ, Rawlings JB, Rao CV, Scokaert POM (2000) Constrained model predictive control: stability and optimality. Automatica 36:789–814
Morari M, García CE, Prett DM, Lee JH (1993) Model predictive control. Prentice Hall, New Jersy
Morari M, Lee JH (1999) Model predictive control: past, present and future. Comput Chem Eng 23:667–682
Mosca E (1994) Optimal, predictive and adaptive Control. Prentice Hall, Englewood Cliffs
Mosca E, Zappa G, Lemos JM (1989) Robustness of multipredictor adaptive regulators: musmar. Automatica 25(4):521–529
Nagy Z, Agachi S (1997) Model predictive control of a pvc batch reactor. Comput Chem Eng 21(6):571–581
Neumerkel D, Franz J, Kruger L, Hidiroglu A (1994) Real time application of neural model predictive control for an induction servo dirve. Proceedings of the 3rd IEEE conference on control applications, vol 1. Glasgow, UK, pp 433–438.
Nevado A, Martín I, Mur F (2012) Design and application of a steam temperature optimizer in a combined cycle. Int J Adapt Control Signal Process 26(10):919–931
Nevado A, Martín I, Requena R (2010) Adex control of steam temperature in a combined cycle. ENERGYCON 2010. Manama, Bahrain, pp 137–142.
Nevado A, Martín L, Sanz J, Alcalde R, Slaven K (2008) Temperature optimization of a naphtha splitter unit. Adv Electr Comput Eng 8:7–16
Nevado A, Requena R, Viudez D, Plano E (2011) A new control strategy for ikn-type coolers. Control Eng Pract 19(9):1066–1074
Normey-Rico JE, Camacho EF (2000) Robust design of gpc for processes with time delay. Int J Robust Nonlinear Control 10:1105–1127
Ogonowski Z (1994) Application of model based predictive control to acrylinitryl polymerization reactor. Proceedings of the 3rd IEEE conference on control applications, vol 3. Glasgow, UK, pp 1903–1908.
Ogunnaike BA (1994) On line modeling and predictive control of an industrial terpolymerization reactor. Int J Control 59(3):711–729
Ohshima M, Hashimoto I, Ohno H, Takeda M, Yoneyama T, Gotoh F (1994) Multirate multivariable predictive control and its application to a polymerization reactor. Int J Control 59(3):731–742
Peterka V (1990) Equivalences, differences and improvements. In: Martenson BM, Hinrichseny D (eds) Predictive y lqg optimal control. Birkauser, Boston, pp 221–244
Pérez RR, Geddes A, Clegg A (2012) Adaptive predictive expert control of superheated steam temperature in a coal-fired power plant. Int J Adapt Control Signal Process 26(10):932–944
Pérez J, Pérez L, Cerezo J, Catediano J (1994) Adaptive predictive control in a thermal power station. Proceedings of the 3rd IEEE conference on control applications, vol 1. Glasgow, UK, pp 747–752
Pérez L, Pérez F, Cerezo J, Catediano J (1997) Adaptive predictive control in a thermal power station. Int J Adapt Control Signal Process 11:367–378
Qin SJ, Badgwell TA (1996) An overview of industiral model predictive control technology. In: Proceedings of fifth International conference on chemical process control, No. 316 in AIChE Symposium Series, Tahoe City, pp 232–256.
Raimondi A, Favela A, Estrada R, Nevado A, Gracia E (2012) Adaptive predictive control of the sulphur recovery process at pemex cadereyta refinery. Int J Adapt Control Signal Process 26:961–975
Richalet JA (1993) Industrial applications of model based predictive control. Automatica 29(8):1251–1274
Richalet JA, Rault JL, Testud JL, Papon J (1978) Model predictive heuristic control: applications to an industrial process. Automatica 15:413–428
Ricker NL, Subrahmanian T, Sim T (1989) Case studies of model predictive control in pulp and paper production. In: Proceedings of the 1988 IFAC workshop on model based process control, Oxford, UK, pp 13–22.
Riesco J, Calvo J, Martín-Sánchez JM (2002) Adaptive predictive expert control: application to waste water treatment plants. Proceedings of the 2002 IEEE international conference on control applications. Glasgow, UK, pp 992–997
Riesco J, Martín-Sánchez JM (2003) Adex optimization system for the biological phase of a water treatment plant. ISA Water and wastewater industries symposia. Orlando, US, pp 221–230
Riesco J, Martín-Sánchez JM (2003) Controlador avanzado para la mezcla de materiales basado en control adaptativo predictivo experto. Cemento y Hormigón 854:18–30
Rouhani R, Mehra RK (1982) Model algorithmic control (mac); basic theoretical properties. Automatica 18(4):401–414
Sato T (2010) Design of a gpc-based pid controller for controlling a weight feeder. Control Eng Practice 18(2):105–113
Sanz J, Alcalde R, Pastor H (2007) Control of sulphur recovery process u-639c at repsol puertollano refinery. In: Second IEEE seminar for advanced industrial control applications (SAICA 2007), Madrid, Spain [S10]S:10, pp 75–83.
Scokaert POM, Mayne DQ (1998) Min-max feedback model predictive control for constrained linear systems. IEEE Trans Autom Control AC 43(8):1136–1142
Scokaert POM, Rawlings JB, Meadows ES (1997) Discrete-time stability with perturbations: Application to model predictive control. Automatica 33(3):463–470
Silva RN, Rato LM, Lemos JM, Coito F (1997) Cascade control of a distributed collector solar field. J Process Control 7(2):111–117
Silva RN, Shirley P, Lemos JM, Gonçalves AC (2000) Adaptive regulation of super-heated steam temperature: a case study in an industrial boiler. Control Eng Pract 8:1405–1415
Serrano A, Martín-Sánchez JM, Mata J (1998) Adaptive control applications in the food industry (in Spanish). Alimentación, Equipos y Tecnología, August, pp 103–107
Soeterboek R (1992) Predictive control: a unified approach. Prentice Hall, Englewood Cliffs
Trujillo R, Ortiz V (1990) SCAP optimization systems: a new era in the operation of processes in the energy field (in Spanish). Energía 5:81–86
Tsang TTC, Clarke DW (1988) Generalized predictive control with input constraints. In: Proceedings of the IEEE, 135(D):451–460.
Uduehi D, Ordys A, Grimble MJ (2002) A generaized predictive control benchmark index for mimo systems. IEEE conference on control applications. Glasgow, UK, pp 1213–1218
Wang Q, Chalaye G, Thomas G, Gilles G (1994) An industrial application of predictive control to glass process. Proceeddings of the 3rd IEEE conference on control applications, vol 3. Glasgow, UK, pp 1891–1896
Wilkinson DJ, Morris AJ, Tham MT (1994) Multivariable constrained predictive control (with application to high performance distillation). Int J Control 59(3):841–862
Yoon Y, Clarke DW (1995) Observer design in receding-horizon predictive control. Int J Control 61(1):171–192
Yang Y, Gao F (2000) Adaptive control of the filling velocity of thermoplastics injection molding. Control Eng Pract 8(11):1285–1296
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Martín-Sánchez, J.M., Rodellar, J. (2015). Closure: The Strength of the Concepts. In: ADEX Optimized Adaptive Controllers and Systems. Advances in Industrial Control. Springer, Cham. https://doi.org/10.1007/978-3-319-09794-7_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-09794-7_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-09793-0
Online ISBN: 978-3-319-09794-7
eBook Packages: EngineeringEngineering (R0)