Abstract
It is very important to properly calculate the gear loss factor in order to predict the gears power loss. A gear loss factor calculated considering the load distribution along the path of contact was implemented. Several gear loss factors were considered in the study. Some gear loss factors don’t correlate with experimental results, putting in evidence the importance of a correct value of gear loss factor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- \( H_{V} \) :
-
Gear loss factor \( [/] \)
- \( P_{IN} \) :
-
Input power of the gearbox \( [W] \)
- \( P_{VZP} \) :
-
Load dependent power loss of meshing gears \( [W] \)
- \( P_{VZ0} \) :
-
Load independent power loss of meshing gears \( [W] \)
- \( P_{VL} \) :
-
Rolling bearings power loss \( [W] \)
- \( P_{VD} \) :
-
Seals power loss \( [W] \)
- \( \mu \) :
-
Coefficient of friction of meshing gears \( [/] \)
- \( \mu_{EXP} \) :
-
Coefficient of friction of meshing gears determined experimentally \( [/] \)
- \( \mu_{Author} \) :
-
Coefficient of friction of meshing gears determined experimentally with author gear loss factor \( [/] \)
- \( \mu_{Ohlendorf} \) :
-
Coefficient of friction of meshing gears determined experimentally with Ohlendorf gear loss factor \( [/] \)
- \( \mu_{mZ} \) :
-
Coefficient of friction of meshing gears Schlenk \( [/] \)
- \( \varepsilon_{\alpha } \) :
-
Transverse contact ratio \( [/] \)
References
SKF General Catalogue 6000 EN. SKF (Nov 2005)
Buckingham E (1949) Analytical mechanics of gears. Dover books for engineers. McGraw-Hill Book Co, New York. URL http://books.google.pt/books?id=lThSAAAAMAAJ
Doleschel A (2002) Wirkungsgradtest, vergleichende beurteilung des einflusses von schmierstoffen auf den wirkungsgrad bei zahnradgetrieben. FVAForschungsvorhaben Nr. 345, FVA Forschungsheft Nr. 664
Eiselt H (1966) Beitrag zur experimentellen und rechnerischen bestimmung der fresstragfáhigkeit von zahnradgetrieben unter berúcksichtigung der zahnflankenreibung. Ph.D. thesis, TH Dresden
Fernandes C, Martins R, Seabra J (2013) Torque loss of spur and helical fzg gears lubricated with wind turbine gear oils. In: International Conference on Gears. Escuela Superior de Ciencias Experimentales y TecnologĂa, Campus de MĂłstoles de la Universidad Rey Juan Carlos, Madrid, Spain (2013)
Fernandes CM, Martins RC, Seabra JH (2013) Torque loss of type {C40} {FZG} gears lubricated with wind turbine gear oils. Tribology International 70. doi:http://dx.doi.org/10.1016/j.triboint.2013.10.003. URL http://www.sciencedirect.com/science/article/pii/S0301679X13003381
Höhn BR, Michaelis K, Hinterstoißer M (2009) Optimization of gearbox efficiency. goriva i maziva 48(4):462–480
Michaelis K (1987) Die integraltemperatur zur beurteilung der fresstragfáhigkeit von stirnrádern. Ph.D. thesis, TU Múnchen
Naruse C, Haizuka S, Nemoto R, Kurokawa K (1986) Studies on frictional loss, temperature rise and limiting load for scoring of spur gear. Bull JSME 29(248):600–608. doi:10.1299/jsme1958.29.600. URL http://ci.nii.ac.jp/naid/110002358505/en/
Niemann G, Winter H (1989) Maschinenelemente: Band 2: Getriebe allgemein, Zahnradgetriebe—Grundlagen, Stirnradgetriebe. Maschinenelemente/Gustav Niemann. Springer. URL http://books.google.pt/books?id=FEiAr9K1rJsC
Ohlendorf H (1958) Verlustleistung und Erwärmung von Stirnrädern. Ph.D. thesis, TU München
Schlenk L (1994) Unterscuchungen zur Fresstragfähigkeit von Grozahnrädern. Ph.D. thesis, TU München
Velex P, Ville F (2009) An analytical approach to tooth friction losses in spur and helical gears-influence of profile modifications. J Mech Des Trans ASME 131(10):1010081–10100810
Acknowledgements
Fundação para a Ciência e a Tecnologia—FCT for the financial support given through the project “Modelização e ensaio da perda de potência e do desgaste em engrenagens helicoidais. Influência do material e da geometria da engrenagem”, with research contract EXCL/EMS-PRO/0103/2012.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Fernandes, C.M.C.G., Marques, P.M.T., Martins, R.C., Seabra, J.H.O. (2015). Influence of Gear Loss Factor on the Power Loss Prediction. In: Flores, P., Viadero, F. (eds) New Trends in Mechanism and Machine Science. Mechanisms and Machine Science, vol 24. Springer, Cham. https://doi.org/10.1007/978-3-319-09411-3_84
Download citation
DOI: https://doi.org/10.1007/978-3-319-09411-3_84
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-09410-6
Online ISBN: 978-3-319-09411-3
eBook Packages: EngineeringEngineering (R0)