Advertisement

Dimensioning the NC: Axes of a Radial Cam Grinding Machine

  • V. CrhákEmail author
  • P. Jirásko
  • M. Václavík
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 24)

Abstract

The computer program deals with the dimensioning of drives and optimizing structural nodes parameters of the radial cam grinder controlled with a three-axis control system. Source information for dimensioning drives is the radial cam contour and a number of structural and technological parameters, such as maximum spindle torque, grinding tool diameter, feed along the cam surface, etc. Conceptually, it is considered with mechanisms with constant gear between the working motion of NC axes and the servo motor (gearboxes and linear ball screws). The calculation results are performance characteristics for each servo motor and the optimized parameters of structural nodes. These parameters are driving torques (maximum, effective) and speed (maximum), constant gear ratios, pitch and diameters of ball screws, etc. It is also considered the positional deviation caused by the compliances of the gear mechanisms.

Keywords

NC axis Drive Program Design 

References

  1. 1.
    Jirásko P (2010) Methodology of electronic cam applications in drives of working links of mechanisms of processing machines, Dissertation, TU Liberec CZGoogle Scholar
  2. 2.
    Jirásko P, Crhák V, Bureš P (2012) The conception of the control system of radial cam grinder, conference IFToMM 2012, ISBN 978-94-007-5124-8, p. 495Google Scholar
  3. 3.
    VÚTS, a.s. (2012) The BRV-300 CNC radial cam grinder. Project: FR-TI1/594—investigation of sophisticated methods for the design and development of single-purpose machines, components and peripheries of processing machines (2009–2013, MPO/FR), RIV/46709002: /12:#0000509Google Scholar
  4. 4.
    Koloc Z, Václavík M (1993) Cam mechanisms. ElsevierGoogle Scholar
  5. 5.
    Marek J (2010) A kolektiv: konstrukce CNC obráběcích strojů, MM publishing 2010, ISBN 978-80-254-7980-3Google Scholar
  6. 6.
    Suk-Hwan Suh, Seong-Kyoon Kang, Dae-Hyuk Chung, Ian stroud: theory and design CNC systems, Springer, e-ISBN 978-1-84800-336-1Google Scholar

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  1. 1.VÚTS, a.s.LiberecCzech Republic

Personalised recommendations