Advertisement

Investigating the Effect of Cable Force on Winch Winding Accuracy for Cable-Driven Parallel Robots

  • Valentin SchmidtEmail author
  • Alexander Mall
  • Andreas Pott
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 24)

Abstract

This paper focuses on the winch winding properties of typical driving mechanisms of cable-driven parallel robots. While cable properties have already been studied, the accuracy of winding mechanisms to control cable robots and the interaction with cable properties has yet to be investigated. To initiate this, some properties believed to affect the winding accuracy are outlined. It was found that cable force can have a significant effect not only because of finite stiffness, but due to ovalisation and elongation effects of the rope. An experimental test on ovalisation showed significant deviations from a standard approximation to evaluate transmission accuracy. This effect can change the accuracy of winding mechanisms by 0.3–1.2 %. Thus when investigating cable-robot accuracy the winch winding properties cannot be ignored.

Keywords

Cable-driven parallel robots Winch Winding properties Ovalisation 

Notes

Acknowledgments

This work was supported by the FhG Internal Programs under Grant No. WISA 823 244.

References

  1. 1.
    Albus JS, Bostelman RV, Dagalakis NG (1992) The NIST ROBOCRANE. J Res Nat Inst Stand Technol 373–385Google Scholar
  2. 2.
    Bosch Rexroth AG (2006) Rexroth IndraDyn S Projekt Planning Manual: MSK Synchronous Motors, 5th edn. R91196289Google Scholar
  3. 3.
    Feyrer K (2007) Wire ropes: tension, endurance, reliability. Springer, ISBN 978-3-540-33831-4Google Scholar
  4. 4.
    Merlet JP (2009) Analysis of wire elasticity for wire-driven parallel robots. In: Proceedings of EUCOMES 08, Springer, Netherlands, pp 471–478Google Scholar
  5. 5.
    Merlet JP (2013) Comparison of actuation schemes for wire-driven parallel robots. In: New trends in mechanism and machine science. Springer, Netherlands, pp 245–254Google Scholar
  6. 6.
    Michael M, Vogel W (2010) Ovalisierung von hochfesten Faserseilen in Rundrillen. In: Z. Euroseil, pp 57–59Google Scholar
  7. 7.
    Ottaviano E, Ceccarelli M, Paone A, Carbone G (2005) A low-cost easy operation 4-cable driven parallel manipulator. In: Proceedings of the 2005 IEEE international conference on robotics and automation ICRA, pp 4008–4013Google Scholar
  8. 8.
    Pott A et al (2012) IPAnema a family of cable-driven parallel robots for industrial applications. In: Cable driven parallel robots, Springer, pp 119–134Google Scholar
  9. 9.
    Riehl N, Gouttefarde M, Krut S, Baradat C, Pierrot F (2009) Effects of non-negligible cable mass on the static behavior of large workspace cable-driven parallel mechanisms. In: Proceedings of IEEE international conference on robotics and automation, Kobe, Japan, pp 2193–2198Google Scholar
  10. 10.
    Schmidt V, Pott A (2012) Implementing extended kinematics of a cable-driven parallel robot in real-time. In: Cable driven parallel robots, Springer, pp 287–298Google Scholar

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  • Valentin Schmidt
    • 1
    Email author
  • Alexander Mall
    • 1
  • Andreas Pott
    • 1
  1. 1.Fraunhofer IPAStuttgartGermany

Personalised recommendations