Abstract
In this chapter, a study on filament winding process for kenaf fibre reinforced polymer composite manufacture is presented. Filament winding process for conventional fibre composites is discussed. Advantages and disadvantages of filament winding process are also briefly covered. A review on filament winding from various research is also performed. Brief review of filament winding of natural fibre composites is provided. The chapter also describes work on improvement of existing filament winding process and fabrication of hollow shaft made from kenaf fibre reinforced composites. The main contribution was the use of drum-type resin bath and surfacing veil, and these had facilitated ease of fabrication of kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Abdalla FH, Mutasher SA, Khalid YA, Sapuan SM, Hamouda AMS, Sahari BB, Hamdan MM (2007) Design and fabrication of low cost filament winding machine. Mater Des 28:234–239
Akkus N, Genc G, Girgin C (2008) Control of the pretension in filament winding process. Acta Mech Autom 2:5–10
Anon (2011) Overview of ATL/AFP, filament winding, Composite World. (Online), Gardner Publications, Inc, http://www.compositesworld.com/zones/atl-afp-filamentwinding
Anwar UMK, Paridah MT, Hamdan H, Sapuan SM, Bakar SE (2009) Effect of pressing time on physical and mechanical properties of bamboo strip fibre reinforced phenolic composites. Ind Crop Prod 29:214–219
Buragohain M, Velmurugan R (2011) Study of filament wound grid-stiffened composite cylindrical structures. Compos Struct 93:1031–1038
Chen W, Yu Y, Li P, Wang C (2007) Science and effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites. Compos Sci Technol 67:2261–2270
Davoodi MM, Sapuan SM, Yunus R (2008) Conceptual design of a polymer composite automotive bumper energy absorber. Mater Des 29:1447–1452
Davoodi MM, Sapuan SM, Ahmad D, Aidy A, Khalina A, Jonoobi M (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Mater Des 32:4857–4865
El-Shekeil YA, Sapuan SM, Abdan K, Zainudin ES (2012) Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Mater Des 40:299–303
Gemi L, Tarakçioğlu N, Akdemir A, Şahin ÖS (2009) Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure. Mater Des 30:4293–4298
Gordon B (2006) Metal prepreg filament winding. SAMPE J 42:6–11
Ha SK, Jeong JY (2005) Science and effects of winding angles on through-thickness properties and residual strains of thick filament wound composite rings. Compos Sci Technol 65:27–35
Hambali A, Sapuan SM, Ismail N, Nukman Y (2009) Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Sci Res Essays 4:198–211
Hernández-Moreno H, Douchin B, Collombet F, Choqueuse D, Davies P (2008) Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Compos Sci Technol 68:1015–1024
Ishak MR, Leman Z, Sapuan SM, Edeerozey AMM, Othman IS (2010) Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites. IOP Conf Series: Mater Sci Eng 11:012006
Ishak MR, Sapuan SM, Leman Z, Rahman MZA, Anwar UMK (2012) Characterization of sugar palm (Arenga pinnata) fibres. J Therm Anal Calorim 109:981–989
Krishnamurthy TN, Idkan M (2014) Fabrication of low cost filament winding machine. Int J Recent Trend Electr Electron Eng 4:30–39
Lehtiniemi P, Dufva K, Berg T, Skrifvars M, Järvelä P (2011) Natural fiber-based reinforcements in epoxy composites processed by filament winding. J Reinf Plast Compos 30:1947–1955
Mahdi E, Hamouda AMS, Sahari BB, Khalid YA (2002) Effect of material and geometry on crushing behaviour of laminated conical composite shells. Appl Compos Mater 9(5):265–290
Mallick PK (2008) Fiber-reinforced composites: materials, manufacturing, and design, 3rd edn. CRC Press, Boca Raton
Meijer G, Ellyin F (2008) A failure envelope for ±60° filament wound glass fibre reinforced epoxy tubulars. Compos A Appl Sci Manuf 39:555–564
Misri S, Ishak MR, Sapuan SM, Leman Z (2014) Split disk properties of kenaf-reinforced unsaturated polyester composites processed by filament winding. In: Colloquium on biocomposite technology 2014. Serdang, Malaysia. 24 November 2014, Book of Abstract, p 5
Misri S, Sapuan SM, Leman Z, Ishak MR (2015) Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Mater Des 65:953–960
Morozov EV (2006) The effect of filament-winding mosaic patterns on the strength of thin-walled composite shells. Compos Struct 76:123–129
Mutasher SA, Sahari BB, Hamouda AMS, Sapuan SM (2007) Experimental study of bending fatigue characteristics of a hybrid aluminum/composite drive shaft. J Compos Mater 41:2267–2288
Mutasher S, Mir-nasiri N, Lee CL (2012) Small-scale filament winding machine for producing fiber composite products. J Eng Sci Technol 7:156–168
Nadia K, Ishak MR (2014) Bending fatigue – kenaf fibre hollow shaft composite: a review. In: The postgraduate symposium on composites science and technology 2014 & the 4th postgraduate seminar on natural fibre composites 2014, 28 January 2014, Putrajaya, pp 193–199
Park J, Hong C, Kim C, Kim C (2002) Analysis of filament wound composite structures considering the change of winding angles through the thickness direction. Compos Struct 55:63–71
Peters ST, Humphrey WD (1987) Filament winding. In: Dostal CA (ed) Engineered materials handbook, volume 1: composites. ASM International, Materials Park
Sapuan SM, Abdalla HS (1998) A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components. Compos A Appl Sci Manuf 29:731–742
Sapuan SM, Jacob MSD, Mustapha F, Ismail N (2002) A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Mater Des 23:701–708
Sapuan SM, Maleque MA, Hameedullah M, Suddin MN, Ismail N (2005) A note on the conceptual design of polymeric composite automotive bumper system. J Mater Process Technol 159:145–151
Sastra HY, Siregar JP, Sapuan SM, Hamdan MM (2006) Tensile properties of Arenga pinnata fiber-reinforced epoxy composites. Polym Plast Technol Eng 45:149–155
Shaw-Stewart D (1985) Filament winding. Mater Eng 6:140–144
Velosa JC, Nunes JP, Antunes PJ, Silva JF, Marques AT (2009) Development of a new generation of filament wound composite pressure cylinders. Compos Sci Technol 69:1348–1353
Wang X, Lou DYS, Zhang N (2004) A helical tow model and numerical simulation of on-line thermal curing of thermoset composites in filament winding. Int J Heat Mass Transfer 47:4807–4820
Yusoff MZM, Salit MS, Ismail N, Wirawan R (2010) Mechanical properties of short random oil palm fibre reinforced epoxy composites. Sains Malaysiana 39:87–92
Zu L (2012) Design and optimization of filament wound composite pressure vessels. Ph.D. Thesis, Delft University, Netherlands
Acknowledgements
The authors wish to thank the Universiti Putra Malaysia for the funding support through Research University Grant Scheme (RUGS 2-2012), project number: 05-02-12-1916RU. The support provided by staff of the Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, is highly appreciated.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Misri, S., Ishak, M.R., Sapuan, S.M., Leman, Z. (2015). Filament Winding Process for Kenaf Fibre Reinforced Polymer Composites. In: Salit, M., Jawaid, M., Yusoff, N., Hoque, M. (eds) Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-07944-8_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-07944-8_18
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07943-1
Online ISBN: 978-3-319-07944-8
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)