Abstract
This present chapter describes the manufacturing technique and properties of coir fibre-reinforced polypropylene composites manufactured using a hot press machine. The effects of basic chromium sulphate and sodium bicarbonate treatment on the physical and mechanical properties were also evaluated. Chemical treatment and fibre loading generally improved the mechanical properties. Five-hour basic chromium sulphate and sodium bicarbonate-treated coir-polypropylene had the best set of properties among all manufactured composites. Chemical treatment also improved water absorption characteristics. This proves that chemical treatment reduced the hydrophilicity of the coir fibre. Overall the hot compression technique was proved to be successful in manufacturing good quality coir reinforced polypropylene composites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arrakhiz FZ, Achab ME, Malha M, Bensale MO, Fehri OF, Blouhfid R, Benmoussa K, Qaiss A (2013) Mechanical and thermal properties of natural fibers reinforced polymer composites: doum/low density polyethylene. Mater Des 43:200–205
Arya A, Tomlal JE, Gejo G, Kuruvilla J (2015) Commingled composites of polypropylene/coir-sisal yarn: effect of chemical treatments on thermal and tensile properties. e-Polym 15(3):169–177. http://www.degruyter.com/
ASTM D 570-99 (2002) Standard test methods for water absorption of plastics. Annual Book of ASTM Standard, vol 08.01
ASTM D 6110-97 (2002) Standard test methods for determining the Charpy impact resistance of notched specimens of plastics. Annual Book of ASTM Standard, vol 08.03
ASTM D 638-01 (2002) Standard test methods for tensile properties of plastics. Annual Book of ASTM Standard, vol 08.03
ASTM D 790-00 (2002) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. Annual Book of ASTM Standard, vol 08.01
Ayrilmis N, Jarusombuti S, Fueangvivat V, Bauchongkol P, White RH (2011) Coir fiber reinforced polypropylene composite panel for automotive interior applications. Fiber Polym 12(7):919–926
Bickerton S, Abdullah MZ (2003) Modelling and evaluation of the filling stage injection/compression molding. Compos Sci Technol 63:1359–1375
Brahmakumar M, Pavithran RM, Pillai RM (2005) Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites. Compos Sci Technol 65:563–569
Dong Y, Ghataura A, Takagi H, Haroosh HJ, Nakagaito AN, Lau KT (2014) Polylactic acid (PLA) biocomposites reinforced with coir fibres: evaluation of mechanical performance and multifunctional properties. Compos Part A 63:76–84
Faruk O, Bledzki AK, Fink HP, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37:1552–1596
Hai NM, Kim BS, Lee S (2009) Effect of NaOH treatments on jute and coir fiber PP composites. Adv Compos Mater 18:197–208
Haque MM, Hasan M, Islam MS, Ali M (2009) Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites. Biores Technol 100:4903–4906
Haque MM, Islam MN, Hasan M, Islam MS, Islam MS (2010) Coir fiber reinforced polypropylene composites: physical and mechanical properties. Adv Compos Mater 19:91–106
Haque MM, Islam MS, Islam MS, Islam MN, Huque MM, Hasan M (2010) Physico-mechanical properties of chemically treated palm fiber reinforced polypropylene composites. J Reinf Plast Compos 29:1734–1742
Harish S, Michael DP, Bensely A, Lalb DM, Rajadurai A (2009) Mechanical property evaluation of natural fiber coir composite. Mater Charact 60:44–49
Haydaruzzaman, Khan AH, Hossain MA, Mubarak A, Khan MA, Ruhul A, Khan RA (2010) Mechanical properties of the coir fiber-reinforced polypropylene composites: effect of the incorporation of jute fiber. J Compos Mater 44(4):401–416
Hemsri S, Grieco K, Asandei AD, Parnas RS (2012) Wheat gluten composites reinforced with coconut fiber. Compos Part A 43:1160–1168
Ho MP, Wang H, Lee JH, Ho CK, Lau KT, Leng J, Hu D (2012) Critical factors on manufacturing processes of natural fibre composites. Compos B 43:3549–3562
Islam MN, Rahman MR, Haque MM, Huque MM (2010) Physico-mechanical properties of chemically treated coir reinforced polypropylene composites. Compos A 41:192–198
Jang JY, Jeong TK, Oh HJ, Youn JR, Song YS (2012) Thermal stability and flammability of coconut fiber reinforced poly (lactic acid) composites. Compos Part B 43:2434–2438
Joseph S, Sreekala MS, Oommen Z, Koshy P, Thomas S (2002) A comparison of mechanical properties of phenol formaldehyde composites reinforced with banana fibers and glass fibers. Compos Sci Technol 62:1857–1868
Joseph PV, Mathew G, Joseph K, Groeninckx G, Thomas S (2003) Dynamic mechanical properties of short sisal fiber reinforced polypropylene composite. Compos A 34:275–290
Karmakar A, Chauhan SS, Modak JM, Chanda M (2007) Mechanical properties of wood-fiber reinforced polypropylene composites. Compos A 38:227–233
Kumar S, Duraibabu SM, Subramanian DK (2014) Studies on mechanical, thermal and dynamic mechanical properties of untreated (raw) and treated coconut sheath fiber reinforced epoxy composites. Mater Design 59:63–69
Kumar S, Kumar B (2012) Study of mechanical properties of coconut shell particle and coir fibre reinforced epoxy composite. Int J Adv Eng Res 4(2):39–62
Kuriakose S, Varma D, Vaisakh VG (2012) Int J Emerging Technol Adv Eng 2(12):751–757
Lai CY, Sapuan SM, Ahmad M, Yahya N, Dahlan KZHM (2005) Mechanical and electrical properties of coconut coir fiber-reinforced polypropylene composites. Polym Plast Technol 44(4):619–632
Lin JC, Chan LC, Nie MN, Ho HL (2006) Mechanical behavior of various nanoparticle filled composites at low-velocity impact. Compos Struct 27:30–36
Mir SS (2012) Manufacturing and characterization of chemically treated coir fiber reinforced polypropylene composites. Bachelor thesis, Bangladesh University of Engineering and Technology, Bangladesh
Mir S, Nafsin N, Hasan M, Hasan N, Hassan A (2013) Improvement of physico-mechanical properties of coir-polypropylene biocomposites by fiber chemical treatment. Mater Des 52:251–257
Monteiro SN, Terrones LAH, D’Almeida JRM (2008) Mechanical performance of coir fiber/polyester composites. Polym Test 27:591–595
Muensri P, Kunanopparat T, Menut P, Siriwattanayotin S (2011) Effect of lignin removal on the properties of coconut coir fiber/wheat gluten biocomposite. Compos Part A 42:173–179
Mulinari DR, Baptista CARP, Souza JVC, Voorwald HJC (2011) Mechanical properties of coconut fibers reinforced polyester composites. Procedia Eng 10:2074–2079
Nam TH, Ogihara S, Tung NH, Kobayashi S (2011) Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly (butylene succinate) biodegradable composites. Compos Part B 42(6):1648–1656
Narendar R, Dasan KP, Nair M (2014) Development of coir pith/nylon fabric/epoxy hybrid composites: mechanical and ageing studies. Mater Design 54:644–651
Pasquini D, Teixeria EDM, Curvelo AADS, Belgacem MN, Dufresne A (2008) Surface esterification of cellulose fibres: processing and characterization of low-density polyethylene/cellulose fibres composite. Compos Sci Technol 68:193–201
Premlal HGB, Ismail H, Baharin A (2002) A comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites. Polym Test 21:833–839
Rana AK, Mandal A, Bandyopadhyay S (2003) Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading. Compos Sci Technol 63:801–806
Romanzini D, Lavoratt A, Ornaghi HL, Amico SC, Zatte AJ (2013) Influence of fiber content on mechanical and dynamic mechanical properties of glass/ramie polymer composites. Mater Design 47:9–15
Romli FI, Alias AN, Rafie ASM, Abdul Majid DLA (2012) Factorial study on the tensile strength of a coir fiber reinforced epoxy composite. AASRI Procedia 3:242–247
Sanadi AR, Caulfield DF, Jacobson RE, Rowell RM (1995) Renewable agricultural fibers as reinforcing fillers in plastics: mechanical properties of kenaf fiber-polypropylene composites. Ind Eng Chem Res 34:1889–1896
Santos EF, Mauler RS, Nachtigall SMB (2009) Effectiveness of maleated- and silanized-PP for coir fiber-filled composites. J Reinf Plast Compos 28(17):2119–2129
Saw SK (2015) Static and dynamic mechanical analysis of coir fiber/montmorillonite nanoclay-filled novolac/epoxy hybrid nanocomposites. Adv Structural Mater 75:137–154
Saw SK, Sarkhel G, Choudhury A (2011) Dynamic mechanical analysis of randomly oriented short bagasse/coir hybrid fibre reinforced epoxy novolac composites. Fibers Polym 12:506–513
Saw SK, Sarkhel G, Choudhury A (2012) Preparation and characterization of chemically modified jute-coir hybrid fiber reinforced epoxy novolac composites. J Appl Polym Sci 125:3038–3049
Simacek P, Advani SG, Lobst LA (2008) Modeling flow in compression resin transfer molding for manufacturing of complex lightweight high-performance automotive parts. J Compos Mater 42:2523–2545
Sindhu K, Joseph K, Joseph JM, Mathew TV (2007) Degradation studies of coir fiber/polyester and glass fiber/polyester composites under different conditions. J Reinf Plast Compos 26(15):1571–1585
Thwe MM, Liao K (2002) Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites. Compos A 33:43–52
Tran LQN, Fuentes CA, Dupont-Gillain C, Vuure AWV, Verpoest I (2013) Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites. Compos Sci Technol 80:23–30
Walbran W, Bickerton S, Kelly P (2013) Evaluating the shear component of reinforcement compaction stress during liquid composite moulding processes. J Compos Mater 47:513–528
Westerlind BS (1988) Surface energy of untreated and surface-modified cellulose fibre. J Appl Polym Sci 36:523–534
Yang HS, Kim HJ, Park HJ, Lee BJ, Hwang TS (2004) Rick-husk flour filled polypropylene composites; mechanical and morphological study. Compos Struct 63:305–312
Yang HS, Kim HJ, Park HJ, Lee BJ, Hwang TS (2006) Water absorption behavior and mechanical properties of lignocellulosic filler-polyolefin bio-composites. Compos Struct 72:429–437
Yang HS, Kim HJ, Park HJ, Lee BJ, Hwang TS (2007) Effect of compatibilizing agents on rice husk flour reinforced polypropylene composites. Compos Struct 77:45–55
Yousif BF (2009) Frictional and wear performance of polyester composites based on coir fibres. Proc Inst Mech Eng Part J: J Eng Tribol 223(1):51–59
Zhu J, Njuguna J, Abhyankar H, Zhu H, Perreux D, Thiebaud F, Chapelle D, Pizzi A, Sauget A, Larmina A, Nicollin A (2013) Effects of fibre configurations on mechanical properties of flaz/tannin composites. Indus Crops Prod 50:68–76
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Hasan, M., Hoque, M.E., Mir, S.S., Saba, N., Sapuan, S.M. (2015). Manufacturing of Coir Fibre-Reinforced Polymer Composites by Hot Compression Technique. In: Salit, M., Jawaid, M., Yusoff, N., Hoque, M. (eds) Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-07944-8_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-07944-8_15
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07943-1
Online ISBN: 978-3-319-07944-8
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)