Abstract
In this work, the design and manufacture of a new assembled prosthesis for a jaw for a young Mexican patient with Temporo Mandibular Disorder (TMD) and articular ankilosys is reported. The required models were obtained with a computed axial tomography (CAT) in conjunction with computed aided design (CAD) and engineering codes. Several tomographic slices were taken digital format (DICOM). Each slice was processed with Scan IP, Unigraphics and Solidworks. The main objective of this study is to show the digital and a physical processing for manufacturing the desired model, taking into account the anthropometry of the young patient, who expects to receive this fixation as a maxillary implant. The parametric FEM model allows creating biomechanical testings in order to evaluate its mechanical response before the final manufacturing by using of a quick prototyping printer system (dust). This prosthesis will be created as an assembly, and the condylar joint will be created by a low friction metal. The expectation for this final implant requires the approval of the Hospital “La Raza” (IMSS) in order to be installed on the patient. For this purpose, a biomechanical engineering procedure and 3D manufacturing quick prototyping was used for the prototype. The clinical case discussed in this chapter is related to a 17 year-old individual. He was treated in the area of maxillofacial and plastic surgery. The severity of the deformation was based on congenital disease. Calcium hydroxyapatite, polymethylmethacrylate polymer and stainless steel, which are highly biocompatible materials, were used for this purpose. It is very important to mention that this procedure avoided the employment of bone tissue taken from the ribs and cranial regions as in other research publications referred. As a result of this research, an assembled 3D personalized jaw model could be presented in order to be fixed in the patient.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
González, M.H.C.: Anquilosis temporomandibular. Revisión de la literatura. Protocolo de manejo e informe de un caso. Medigraphic (2011)
Alplay, H.K., Murat, K.O., Ortakoglut, K., Rasit, G.B., Sinan, Y.A.: Treatment of temporomandibular joint ankylosis with temporalis superficial fascia flap. Mil. Med. 170(2), 167–170 (2005)
Humana, A.: Anatomía Humana. Obtained from “Maxilar Inferior y Articulacion Temporomandibular” (2011) http://www.anatomiahumana.net/maxilar-inferior-articulacion-temporomandibular.html
Andresen, P.R., Bookstein, F.L., Conradsen, K., Ersbøll, B.K., Marsh, J.L., Kreiborg, S.: Surface-bounded growth modeling applied to human mandibles. IEEE Trans. Med. Imag. 19(11), 1053–1063 (2000)
Barrett, J.B., Fryer, M.P., Kollias, P., Ohlwiler, D.A., Templeton, J.B.: Silicone and teflon prostheses, including full jaw substitution: laboratory and clinical studies of etheron. Ann. Surg. 157(6), 932–943 (1963)
Das, U.M., Keerthi, R., Ashwin, D.P., Venkata, R.S., Reddy, D., Shiggaon, N.: Ankylosis of temporomandibular joint in. J. Indian Soc. Pedod. Prev. Dent., 27(2), 116–120 (2009)
Franchi, L., Baccetti, T., McNamara, J.A.: Thin-plate spline analysis of mandibular growth. Angle Orthod. 71, 83–92 (2001)
Gu, Y., McNamara, J.A.: Mandibular growth changes and cervical vertebral maturation. Angle Orthod. 77, 947–953 (2007)
Jain, G., Kumar, S., Rana, A.S., Bansal, V., Sharma, P., Vikram, A.: Temporomandibular joint ankylosis: a review of 44 cases. J. Oral Maxillofac. Surg. 12, 61–66 (2008)
Montenegro, M.A.: Factores que regulan el crecimiento del cóndilo mandibular. Rev. Chil. Ortod. 21, 6–16 (2004)
Montenegro, M.R., Rojas, M.R.: Factores que Regulan la Morfogénesis y el Crecimiento. Int. J. Odontostomat. 1, 7–15 (2007)
Rabie, A.M., She, T.T., Hägg, U.: Factors regulation mandibular condylar growth. Am. J. Orthod. Dentofac. Orthop. 122, 401–409 (2002)
Rabie, A.M., She, T.T., Hägg, U.: Functional appliance therapy accelerates and enhances condylar growth. Am. J. Orthod. Dentofac. Orthop. 123, 1–10 (2003)
Ramfjord, S.P., Ash, M.M.: Oclusión. Nueva Editorial Interamericana, México (1972)
Ramirez-Yañez, G.O., Smid, J.R., Waters, M.J.: Influence of growth hormone on the craniofacial complex of transgenic mice. Euro. J. Orthod. 27, 494–500 (2005)
Reynolds, M., Reynolds, M., Adeeb, S., El-Bialy, T. 3-D volumetric evaluation of human mandibular growth. Open Biomed. Eng. J. 5, 83–89 (2011)
Tedaldi, J., Calderón, R., Mayora, L., Quirós, O., Farias, M., Rondón, S., Lerner, H.: Tratamiento de Maloclusiones según el estadio de maduración carpal—Revisión Bibliográfica. Revista Latinoamericana de Ortodoncia y Odontopediatría (2007)
Wilson, E.M., Green, J.R.: The development of jaw motion for mastication. Early Human Dev. 85, 303–311 (2009)
Wolford, L.M., Mehra, P.: Custom-made total joint prostheses for temporomandibular. Baylor Univ. Med. Center Proc. 13, 135–138 (2000)
World Record Academy. http://www.worldrecordacademy.com/medical/first_3D_printed_jaw_transplant_83-year-old_woman_sets_world_record_112714.html (2012)
Moreno-Garibaldi, P.: Diseño y Manufactura de una Protesis de Maxilar Inferior para Pacientes con Anquilosis Temporomandibular Lateral. Instituto Politécnico Nacional. Escuela Superior de Ingeniería Mecánica y Eléctrica. Maestría en Ciencias (2013)
Romo-Escalante, E.: Diseño y Manufactura de Prótesis Parcial de Maxilar Inferior para Paciente con Anquilosis Temporomaxilar y Malformaciones de Rama. Instituto Tecnológico y de Estudios Superiores de Monterrey, Campus Ciudad de México. Reporte de Proyecto Integrador (2012)
Beltrán-Fernández, J.A., Hernández-Gómez, L.H., Ruiz-Muñoz, E., González-Rebattú, A., Rodríguez-Cañizo, R.G., Urriolalagoitia-Calderón, G., Urriolagoitia-Sosa, G., Hernández-Moreno, H.: Biomechanical evaluation of corporectomy in porcine lumbar specimens using flexible polymer belts. J. Phys. Conf. Ser. (2009). doi:10.1088/1742-6596/181/1/012015
Beltrán, J. et al.: Assessment of the structural integrity of c3–c5 cervical porcine vertebrae model based on 2-D classic cad, 3-D scanner and 3-D computed tomography. In: Öchsner A., da Silva L.F. M., Altenbach H. (eds.) Analysis and Design of Biological Materials and Structures, vol. 1/2010– vol 20, Springer, Berlin (2010) ISBN: 978-3-642-22130-9
Beltrán-Fernández, J.A., Rebattú y González, M.G., Hernández-Gómez, L.H., Rebatú y González, A.G., Calderón, G.U.: Biomechanical Prosthesis Design of an Orbicular Cranial Cavity. In: Öchsner A., da Silva L.F.M., Altenbach H. (eds.), Advances in Bio—Mechanical Systems and Materials, vol. 40/2013–vol 40, pp. 87–94, Springer, Berlin (2013) ISBN: 978-3-319-00478-5. doi:10.1007/978-3-319-00479-2_7
Acknowledgments
The authors kindly acknowledge the support given to this research by the National Polytechnic Institute (IPN), ITESM, IMSS and the National Council for Science and Technology (CONACYT)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Beltrán-Fernández, J.A. et al. (2014). Biomechanical Assembled Prosthesis of a Temporo Mandibular Joint Disorder Using Biocompatible Materials. In: Öchsner, A., Altenbach, H. (eds) Design and Computation of Modern Engineering Materials. Advanced Structured Materials, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-07383-5_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-07383-5_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07382-8
Online ISBN: 978-3-319-07383-5
eBook Packages: EngineeringEngineering (R0)