Abstract
In this chapter the topics of sensitivity and dynamic range for a receiver are addressed. We begin by introducing their definitions, the concepts of minimum detectable signal, signal-to-noise ratio, 1 dB compression point (CP 1 dB), saturation, and some relationships between input and output CP 1 dB), intermodulation distortion, thirdorder intercept point (IP3), receiver blocking, and spur-free dynamic range. The relationships between these parameters as applied to building blocks in a cascade arrangement making up a receiver, and the overall parameters for the receiver, is presented. The chapter ends with an example of how changes in the sequence of building blocks in a cascade impact the sensitivity and dynamic range of a receiver.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Texas Instrument Technical Brief SWRA030, Matt Loy, Editor, May 1999.
Q. Gu, RF System Design of Transceivers for Wireless Communications, Springer, 2005.
R. Sagers, Intercept Point and Undesired Responses, IEEE Trans. on Vehicular Tech., Vol. VT-32, No. 1, Feb. 1983, pp. 121–133.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 The Authors
About this chapter
Cite this chapter
De Los Santos, H., Sturm, C., Pontes, J. (2015). Sensitivity and Dynamic Range. In: Radio Systems Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-07326-2_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-07326-2_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07325-5
Online ISBN: 978-3-319-07326-2
eBook Packages: EngineeringEngineering (R0)