Abstract
The core transmission tasks introduced in Chap. 1 require the tasks of power transfer and shifting or modulation as described in Chap. 3. For the latter actuation and servo systems are needed to provide the ratio changes and to control the launch devices. The transmission must also be lubricated and cooled, and this is done with appropriate auxiliary systems. For this, the individual requirements and functionalities differ depending on the transmission design (see Chap. 6).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
This applies equally to a hydraulic or electro-hydraulic system; especially the volumetric losses (leaks) are significant then.
- 2.
From this point on, for simplicity, only the sliding sleeve will be referred to. Its operation is the same as that of the slider gears.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Fischer, R., Küçükay, F., Jürgens, G., Najork, R., Pollak, B. (2015). Actuation, Servo, and Auxiliary Systems. In: The Automotive Transmission Book. Powertrain. Springer, Cham. https://doi.org/10.1007/978-3-319-05263-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-05263-2_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-05262-5
Online ISBN: 978-3-319-05263-2
eBook Packages: EngineeringEngineering (R0)