Abstract
In line with the general theme of the International Workshop series on Turbulent Combustion of Sprays (TCS), this Chapter addresses relevant issues of turbulent flame structure, auto-ignition and atomization with reference to well-characterized burners that could be implemented by modelers with relative ease. The discussion of turbulent combustion is limited to dilute sprays stabilized on a simple piloted burner. Attention is shifted to the structure of the reaction zones and the challenges of computing chemical composition of flames of different fuels. Another section is dedicated to studying auto-ignition of turbulent dilute spray flames as observed in a hot vitiated co-flow. A common feature to all liquid fuels studied here is the presence of ignition kernels which grow (and sometimes extinguish) to induce flaming combustion further downstream. It is noted that this downstream region is responsible for the bulk of heat release and its local compositional structure depends on the parent fuel.
The last section focuses on non-reacting dense sprays with a view to shed some light on the effects of turbulence on secondary atomization. Two configurations are discussed: one for droplets flowing in a pipe and the other uses dense sprays generated with an air assisted atomizer. The carrier velocity is changed in both configurations to induce turbulence which affects atomization as clearly demonstrated by the reported measurements. While this chapter is not necessarily a roadmap for the efforts of future TCS workshops, the topics addressed here form a logical progression that is somewhat commensurate with the increasing order of complexity generally sought for computations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Nigam, P.S., Singh, A., “Production of liquid biofuels from renewable sources”, Prog. Energy Combust. Sci. 37(2011) 52–68.
Demirbas, A., “Progress and recent trends in biofuels”, Prog. Energy Combust. Sci. 33(2007) 1–18.
Drapcho, C.M., Nhuan, N.P., Walker, T.H., “Biofuels engineering process technology”, McGraw Hill, 2008.
Alleman TL, McCormick RL., “Fischer–Tropsch diesel fuels—properties and exhaust emissions: a literature review” SAE paper 2003–01-0763, 2003.
Schaberg PW, Botha J, Schnell M, Herrmann HO, Keppeler S, Friess W., “HSDI diesel engine optimisation for GTL Diesel Fuel” SAE paper 2007-01-0027, 2007.
Agarwal, A.K., “Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines”, Prog. Energy Combust. Sci. 33(2007) 233–271.
Lapuerta, M., Armas, O., Rodriguez-Fernandez, J., “Effect of biodiesel fuels on diesel engine emissions”, Prog. Energy Combust. Sci. 34(2008)198–223.
Sun, J., Caton, J.A., Jacobs, T.J., “Oxides of nitrogen emission from biodiesel-fuelled engines”, Prog. Energy Combust. Sci. 36(2010) 677–695.
Benjumea, P., Agudelo, J.R., Agudelo, A.F., “Effect of the degree of unsaturation of biodiesel fuels on engine performance, combustion characteristics and emission”, Energy & Fuels 25(2011) 77–85.
Schonborn, A., Ladommatos, N., Williams, J., Allan, R., Rogerson, J., “The influence of molecular structure of fatty acid monolakyl esters on diesel combustion”, Combust. Flame 156(2009) 1396–1412.
Wang, Y.L., Feng, Q., Egolfopoulos, F.N., Tsotsis, T.T., “Studies of C4 and C10 methyl ester flames”, Combust. Flame 158 (2011) 1507–1519.
Gail, S., Sarathy, S.M., Thomsom, M.J., Dievart, P., Dagaut, P., “Experimental and chemical kinetic modeling study of small methyl esters oxidation: Methyl (E)-2-butenoate and methyl butanoate”, Combust. Flame 155 (2008) 635–650.
Dooley, S., Curran, H.J., Simmie, J.M., “Autoignition measurements and a validated kinetic model for the biodiesel surrogate, methyl butanoate”, Combust. Flame 153(2008) 2–32.
Farooq, A., Davidson, D.F., Hanson, R.K., Hyunh, L.K., Violi, A., “An experimental and computational study of methyl ester decomposition pathways using shock tubes”, Proc. Combust. Inst. 32(2009) 247–253.
Herbinet, O., Pitz, W.J., Westbrook, C.K., “Detailed chemical kinetic mechanism for the oxidation of biodiesel fuels blend surrogate”, Combust. Flame 157(2010) 893–908.
Ji, C., Dames, E., Wang, Y.L., Wang, H., Egolfopoulos, F.N., “Propagation and extinction of premixed C5-C12 n-alkane flames”, Combust. Flame 157 (2010) 277–287.
Liu, N., Ji, C., Egolfopoulos, F.N., “Ignition of non-premixed C3-C12 n-alkane flames”, Combust. Flame 159 (2012) 465–475.
Faeth, G., Hsiang, L., Wu, P., “Structure and breakup properties of sprays”, International Journal of Multiphase Flow 21(1995) 99–127.
A. Lefebvre, “Atomization and Sprays”, Taylor and Francis, 1989.
Dumouchel, C., “On the experimental investigation on primary atomization of liquid streams”, Experiments in Fluids 45(2008) 371–422.
Lasheras, J., Hopfinger, E., “Liquid jet instability and atomization in a coaxial gas stream”, Annual Review of Fluid Mechanics 32(2000) 275–308.
Guildenbecher, P.D., Lopez-Rivera, C., Sojka, P., “Secondary atomization”, Experiments in Fluids 46(2009) 371–402.
Hinze, J., “Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes”, A.I.Ch.E. Journal 1(1955) 289–295.
Linne, M.A., Paciaroni, M., Berrocal, E., and Sedarsky, D., “Ballistic imaging of liquid breakup processes in dense sprays”, Proceedings of the Combustion Institute, 32(2009) 2147–2161.
Linne M.A., Sedarsky D., Meyer T., Gord J., Carter C., “Ballistic imaging of the flow in the interior of the near-field of an effervescent spray”, Exp Fluids 49(2010) 911–923.
Kastengren A., Powell C.F., Liu Z., Wang J., “Time resolved, three dimensional mass distribution of diesel sprays measured with X-ray radiography”, SAE technical paper series, paper no. 2009–01-0840, 2009.
Balewski, B., Heine, B., Tropea, C., “Experimental investigation of the correlation between nozzle flow and spray using laser doppler velocimeter, phase doppler system, high-speed photography, and X-ray radiography”, Atomization and Sprays 20(2010) 57–70.
Wang, Y.J., Im, K.S., Fezzaa, K., Lee, W.K., Wang, J., Micheli, P., Laub, C., “Quantitative X-ray phase contrast imaging of air-assisted water sprays with high Weber numbers”, Appl Phys Lett 89(2006):1–3.
O’Loughlin, W., and Masri, A.R., “A New Burner for Studying Auto-Ignition in Turbulent Dilute Sprays”, Combust. Flame 158(2011) 1577–1590.
Markides, C.N., Mastorakos, E., “An experimental study of hydrogen autoignition in a turbulent co-flow of heated air”, Proc. Combust. Inst. 30(2005) 883–891.
Neophytou, A., Mastorakos, E., Cant, R.S., “The internal structure of igniting turbulent sprays as revealed by complex chemistry DNS”, Combust. Flame 159(2012) 641–664.
Neophytou, A., Mastorakos, E., Cant, R.S., “Complex Chemistry Simulations of Spark Ignition in Turbulent Sprays”, Proc. Combust. Inst. 33(2011) 2135–2142.
Wang, Y., Rutland, C.J., “Direct numerical simulation of ignition in turbulent n-heptane liquid-fuel spray jets”, Combust Flame 149(2007) 353–365.
Masri, A.R., and Gounder, J.D., “Turbulent Spray Flames of Acetone and Ethanol Approaching Extinction”, Combust. Sci. Technol. 182(2010) 702–715.
Gounder, J.D., Kourmatzis, A., and Masri, A.R., “Turbulent Piloted Dilute Spray Flames: Flow Fields and Droplet Dynamics”, Combustion and Flame, 159(2012) 3372–3397.
Cabra, R., Chen, J-Y., Dibble, R.W., Karpetis, A.N., and Barlow, R.S., “Lifted methane-air jet flames in a vitiated coflow”, Combustion and Flame, 143(2005) 491–506.
O’Loughlin, W., and Masri, A.R., “The Structure of the Auto-Ignition Region of Turbulent Dilute Methanol Sprays Issuing in a Vitiated Co-flow”, Flow Turbulence Combust. 89(2012) 13–35.
O’Loughlin, W., and Masri, A.R., “A comparative study of non-reacting and auto-igniting turbulent acetone sprays jet”, in preparation.
O’Loughlin, W., “Investigations of auto-ignition in dilute spray flames”, PhD Thesis, The University of Sydney, 2012.
Gordon, R.L., Masri, A.R., and Mastorakos, E., “Simultaneous Rayleigh Temperature, OH- and CH2O-LIF Imaging of Methane Jets in a Vitiated Coflow”, Combust. Flame 155 (2008) 181–195.
Gordon, R.L., Masri, A.R., and Mastorakos, E., “Heat Release Rate as Represented by [OH]x[CH2O] and its Role in Autoignition”, Combust. Theory and Modeling, 13 (2009) 645–670.
Kolmogorov, A.N. Dokl. Akad. Nauk SSSR. 66(1949) 825–828.
Sevik, M. and Park, S.H., “The splitting of drops and bubbles by turbulent fluid flow”, Journal of Fluids Engineering. 95(1973) 53–60.
Kourmatzis, A. and Masri, A.R., “Multiple stage atomization of fuels for use in combustion applications”, 18th Australasian Fluid Mechanics Conference, Tasmania, 3–7 December 2012.
Kourmatzis, A., Pham, P.X., and Masri, A.R., “Air assisted atomization and spray density characterization of ethanol and a range of biodiesels”, Fuel, In Press, 2013.
Engelbert, C., Hardalupas, Y., and Whitelaw, J., “Breakup phenomena in coaxial airblast atomizers”, Proceedings of the Royal Society A, 451(1995) 189–229.
Lasheras, J., Villermaux, E., and Hopfinger, E.J., “Break-up and atomization of a round water jet by a high speed annual air jet”. Journal of Fluid Mechanics, 357(1998) 351–379.
Acknowledgement
This work is supported by a grant from the Australian Research Council.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Masri, A., Kourmatzis, A., O’Loughlin, W., Gounder, J. (2014). From Dilute to Dense Turbulent Sprays: Combustion, Auto-Ignition and Atomization. In: Merci, B., Gutheil, E. (eds) Experiments and Numerical Simulations of Turbulent Combustion of Diluted Sprays. ERCOFTAC Series, vol 19. Springer, Cham. https://doi.org/10.1007/978-3-319-04678-5_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-04678-5_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-04677-8
Online ISBN: 978-3-319-04678-5
eBook Packages: EngineeringEngineering (R0)