Abstract
This chapter presents an application of predictive control in power electronics. The analyzed application is an energy conversion system from alternate current (AC) to direct current (DC) and to alternate current (AC) again. This example has been carefully selected because a number of predictive control principles can be clearly explained using this topology and later expanded to a wide variety of converter topologies. The chapter includes the mathematical models an a clear presentation of the control strategies. The results show that the use of predictive control introduces a conceptually different solution which allows for the control of electrical energy without using pulse-width modulation and linear controllers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
M. Morari, J.H. Lee, Model predictive control: past, present and future. Comput. Chem. Eng. 23, 667–682 (1999)
J.H. Lee, Model predictive control: review of the three decades of development. Int. J. Control Autom. Syst. 9(3), 415–424 (2011)
E. Fuentes, R. Kennel, Finite-set model predictive control of the two-mass-system, in 2011 Workshop on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), pp. 82–87 (2011)
M. Malinowski, M. Kazmierkowski, S. Hansen, F. Blaabjerg, G. Marques, Virtual-fluxbased direct power control of three-phase pwm rectifiers. IEEE Trans. Ind. Appl. 37(4), 1019–1027 (2001)
D. Quevedo, R. Aguilera, M. Perez, P. Cortes, R. Lizana, Model predictive control of an afe rectifier with dynamic references. IEEE Trans. Power Electron. 27(7), 3128–3136 (2012)
R. Vargas, U. Ammann, J. Rodriguez, J. Pontt, Predictive strategy to control commonmode voltage in loads fed by matrix converters. IEEE Trans. Ind. Electron. 55(12), 4372–4380 (2008)
P. Cortes, J. Rodriguez, D. Quevedo, C. Silva, Predictive current control strategy with imposed load current spectrum. IEEE Trans. Power Electron. 23(2), 612–618 (2008)
H. Aggrawal, J. Leon, L. Franquelo, S. Kouro, P. Garg, J. Rodriguez, Model predictive control based selective harmonic mitigation technique for multilevel cascaded h-bridge converters. in IECON 2011—37th Annual Conference on IEEE Industrial Electronics Society, pp. 4427–4432 (2011)
P. Cortes, J. Rodriguez, C. Silva, A. Flores, Delay compensation in model predictive current control of a three-phase inverter. IEEE Trans. Ind. Electron. 59(2), 1323–1325 (2012)
T. Geyer, Model predictive direct current control: formulation of the stator current bounds and the concept of the switching horizon. IEEE Ind. Appl. Mag. 18(2), 47–59 (2012)
Acknowledgment
Part of this work was supported by NPRP grant No. 4-077-2-028 from the Qatar National Research Fund (a member of Qatar Foundation). In addition, we also acknowledge support from Universidad Técnica Federico Santa María. The statements made herein are solely the responsibility of the authors.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Rodríguez, J., Abu-Rub, H., Perez, M.A., Kouro, S. (2014). Application of Predictive Control in Power Electronics: An AC-DC-AC Converter System. In: Orłowska-Kowalska, T., Blaabjerg, F., Rodríguez, J. (eds) Advanced and Intelligent Control in Power Electronics and Drives. Studies in Computational Intelligence, vol 531. Springer, Cham. https://doi.org/10.1007/978-3-319-03401-0_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-03401-0_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-03400-3
Online ISBN: 978-3-319-03401-0
eBook Packages: EngineeringEngineering (R0)