Skip to main content
SpringerLink
Log in
Book cover

Building Refurbishment for Energy Performance pp 61–118Cite as

Transparent Building Envelope: Windows and Shading Devices Typologies for Energy Efficiency Refurbishments

  • Chapter
  • First Online:

Part of the book series: Green Energy and Technology ((GREEN))

Abstract

Main typologies of windows, typical of the existing buildings, and innovative solutions, special glasses, and shading devices (fixed shading, mobile shading, roller blinds, and curtains) are described and assessed. The windows and solar shadings’ appropriate choices are evaluated on the basis of a case study. For each of these solutions, thermal efficiency, natural lighting, and acoustic performances have been assessed with appropriate calculation codes. Dynamic computational methods with a graphical interface are used (EnergyPlus, through the Design Builder interface, for energy simulations, RELUX to simulate natural lighting, and DISIA for the acoustic simulations). Four representative climatic datasets corresponding to various locations (Berlin, Milan, Florence, and Athens) were considered. Appropriate performance indicators (defined by regulations or conventionally applied in science) have been identified in order to analyze performances and to evaluate different strategies for the achievements of energy efficiency and of comfortable environments: Q sw (winter solar gains), θo (operative temperature), F w (reduction factor of winter solar gains), DF (average daylight factor), UDI (useful daylight illuminance), daylight uniformity, D 2m, nTw (acoustic insulation of facade normalized with respect to the reverberation time), and Δl fs (sound pressure level difference due the façade shape). Starting from the performance evaluation of existing buildings, according to a logic implementation of consequential performance, this study provides for the assessment of different phases: the first interventions (phase A), replacement of existing windows with other high-energy performance ones (phase B), adaptation of the thermal transmittance of opaque envelope to national limits (phase C), and introduction to solar systems and solar control glasses (phase D). Then, the effect of screens and windows on the reduction in the thermal loads in the summer season and on the thermal comfort has been assessed, together with the influence on visual and acoustic comfort of different configurations of windows and shielding. Finally, a comprehensive evaluation on the aspects of energy consumption, natural lighting, acoustic comfort, and technical feasibility (TF) is carried out.

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD   109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

Abbreviations

A :

Area (m2)

A g , A f :

Glass and frame area (m2)

D 2m,nTw :

Standardized façade sound level difference (dB)

DF:

Daylight factor (%)

E:

East orientation

E int, E ext :

Indoor and outdoor illuminances (lux)

E min/E m :

Daylight uniformity (–)

g :

Solar factor (%)

I sol :

Solar radiation (W/m2)

N:

North orientation

Qs w :

Winter solar gains (kWh)

Qs s :

Summer solar gains (kWh)

θo :

Operative temperature (°C)

F w :

Reduction factor of winter solar gains (%)

F s :

Reduction factor of summer solar gains (%)

Ra:

Color-rendering index (–)

R w :

Rating of sound reduction index (dB)

S:

South orientation

SC:

Shading coefficient (%)

U :

Thermal transmittance [W/(m2 K)]

UDI:

Useful daylight illuminance (–)

U g :

Thermal transmittance of the glass [W/(m2 K)]

U f :

Thermal transmittance of the frame [W/(m2 K)]

U w :

Thermal transmittance of the window [W/(m2 K)]

l g :

Total perimeter of the glazing (m)

Ψ:

Linear thermal transmittance [W/(m K)]

W:

West orientation

Y IE :

Periodic thermal transmittance [W/(m2 K)]

ΔL fs :

Façade shape level difference (dB)

φ:

Phase shift

Ψ g :

Linear thermal transmittance of glass [W/(m K)]

α:

Noise absorption coefficient (–)

λ:

Τhermal conductivity [W/(m K)]

θdb :

Dry bulb temperature (°C)

τ v :

Light transmittance (%)

τλ :

Spectral light transmittance (%)

References

  1. Baldini S, Carletti C, Cellai G, Nannipieri E, Sciurpi F, Secchi S (2011) Solar radiation control: acoustic and lighting performances of solar shading devices. In: 48th AICARR international congress Baveno, 22–23 Sept

    Google Scholar 

  2. Boyce P (1995) Minimum acceptable transmittance of glazing. Lighting Res Technol 27(3):145–152

    Article  Google Scholar 

  3. Boyce P, Hunter C, Howlett O (2003) The benefits of daylight through windows. Lighting Research Center, Rensselaer Polytechnic Institute, Troy, New York

    Google Scholar 

  4. Busa L, Cellai G, Secchi S (2005) Acoustic protection of the buildings. Alinea Editore, Florence

    Google Scholar 

  5. Busa L, Secchi S, Baldini S (2010) Effect of façade shape for the acoustic protection of buildings. Building Acoustics 17(4):317–338

    Article  Google Scholar 

  6. Carletti C, Cellai G, Nannipieri E, Pierangioli L, Sciurpi F, Secchi S (2012) Energy refurbishment of existing buildings with interventions on windows and solar shadings. In: 67th ATI national congress, Trieste, 11–14 Sept

    Google Scholar 

  7. Cellai G et al (1994) Energy aspects of windows. In: 49th ATI national congress, Perugia, Italy, pp 271–283

    Google Scholar 

  8. Cellai G, Secchi S, Nannipieri E, Baldini S (2011) Acoustic and lighting performances improvement of solar shadings. In: Proceedings of the 38th AIA national congress, Rimini, 8–10 June

    Google Scholar 

  9. Cellai G, Secchi S (2009) Evaluating the performance of windows for well-being and reducing energy consumption. In: 47th AICARR international congress system, energy and built environment toward a sustainable comfort, Tivoli (RM) Italy, 8–9 Ottobre, pp 219–230

    Google Scholar 

  10. Energy Resources Design (2006) High-performance glazing: making the most of today’s advanced technologies. e-News, No. 54

    Google Scholar 

  11. Farina A (2000) Validation of the pyramid tracing algorithm for sound propagation outdoors: comparison with experimental measurements and with the ISO/DIS 9613 standards. Adv Eng Softw 31(4):241–250

    Article  MATH  MathSciNet  Google Scholar 

  12. LBNL (US DOE) (2010) EnergyPlus engineering reference, Berkeley, CA, USA

    Google Scholar 

  13. Nabil A, Mardaljevic J (2005) Useful daylight factors. Energy Buildings 38(7)

    Google Scholar 

  14. Nabil A, Mardaljevic J (2005) Useful daylight illuminance: a new paradigm to access daylight in buildings. Lighting Res Technol 37(1):41–59

    Google Scholar 

  15. REHVA (2010) Guidebook n°12. In: Wouter Beck (ed) Solar shading—How to integrate solar shading in sustainable buildings

    Google Scholar 

  16. Relux Informatik AG (2007) Relux professional 2007 Manual, Basel, Switzerland. www.relux.ch

  17. Russo V (1994) Practical guide-selection and application of special glass insulating. Glass Manufacturers Association

    Google Scholar 

Normative References

  1. CIE (1972) Daylighting: international recommendations for the calculation of natural daylight, vol 16. CIE Pub, Paris

    Google Scholar 

  2. CIE (1973) Standardization of luminance distribution of clear skies, vol 22. CIE Pub, Paris

    Google Scholar 

  3. EN 12207 (1999) Windows and doors—Air permeability—Classification

    Google Scholar 

  4. EN 12207 (2000) Windows and doors-permeability-classification

    Google Scholar 

  5. EN 12208 (1999) Windows and doors—watertightness—classification

    Google Scholar 

  6. EN 12210 (1999) Windows and doors—resistance to wind load—classification

    Google Scholar 

  7. EN 12354-3 (2000) Building acoustics—estimation of acoustic performance of buildings from the performance of elements—Part 3: airborne sound insulation against outdoor sound

    Google Scholar 

  8. EN 12519 (2004) Windows and pedestrian doors—terminology

    Google Scholar 

  9. EN 410 (2000) Glass in building—determination of luminous and solar characteristics of glazing

    Google Scholar 

  10. EN ISO 10077-1 (2002) Thermal performance of windows, doors and shutters—calculation of thermal transmittance—simplified method

    Google Scholar 

  11. EN ISO 12464-1 (2004) Light and lighting—lighting of work places-indoor work places

    Google Scholar 

  12. EN ISO 14683 (2007) Thermal bridges in building construction—linear thermal transmittance—simplified methods and default values

    Google Scholar 

  13. UNI 11296 (2009) Acustica—Linee guida per la progettazione, la selezione, l’installazione e il collaudo dei sistemi per la mitigazione ai ricettori del rumore originato da infrastrutture di trasporto (guidelines for the design, selection, installation and testing of systems for the mitigation of noise, originating from transport infrastructure to receptors)

    Google Scholar 

  14. Weather data IGDG. http://apps1.eere.energy.gov/buildings/energyplus/cfm/weather_data3.cfm

Download references

Acknowledgments

Authors thank Lorenzo Giorgi, Elisa Nannipieri and Leone Pierangioli for the valuable scientific collaboration in the drafting of this chapter.

Author information

Authors and Affiliations

  1. Department of Industrial Engineering, University of Florence, Florence, Italy

    G. Cellai, C. Carletti, F. Sciurpi & S. Secchi

Authors
  1. G. Cellai
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. C. Carletti
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. F. Sciurpi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. Secchi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to G. Cellai .

Editor information

Editors and Affiliations

  1. Civil and Architecture Engineering Dept, University of Pavia, Pavia, Italy

    Anna Magrini

Rights and permissions

Reprints and permissions

Copyright information

© 2014 Springer International Publishing Switzerland

About this chapter

Cite this chapter

Cellai, G., Carletti, C., Sciurpi, F., Secchi, S. (2014). Transparent Building Envelope: Windows and Shading Devices Typologies for Energy Efficiency Refurbishments. In: Magrini, A. (eds) Building Refurbishment for Energy Performance. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-03074-6_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-03074-6_2

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-03073-9

  • Online ISBN: 978-3-319-03074-6

  • eBook Packages: EnergyEnergy (R0)

Publish with us

Policies and ethics

Search

Navigation