Abstract
A technique for characterization and modeling of planar varactor diodes is presented. The diode structures were fabricated on a low cost GaAs process, measured in a shunt configuration, and subsequently modeled. The simulations are in good agreement with the measured data. The planar device was integrated in an MMIC VCO and the measured performance conforms to the design objectives.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
D. Hoag, A. Rozbicki, J. Brogle, R. Robertson and R. Lewis, Proc. European Microwave Integrated Circuits Conference, 04, 160 (2009).
J. Castelino, P. Wong, E. Sijercic, B. Pejcinovic and A. Baric, Proc. IEEE ICECS, 03, 487 (2003).
S. Lucysyzn, J. Luck, G. Green and I.D. Robertson, IEEE MTT-S, 259 (1992).
V.K Arora, Proximity Fuzes Theory and Techniques (Defence Scientific Information and Documentation Center, Delhi, 2010).
M/ACOM, www.macomtech.com/datasheets/MA46410-480 (2012).
Acknowledgments
The authors wish to thank the fabrication team at GAETEC for processing the devices.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Arora, V., Kulkarni, C.P., Bhalke, S., Kumar, A. (2014). Planar Schottky Varactor Diode Characterization for MMIC Voltage Controlled Oscillator Applications. In: Jain, V., Verma, A. (eds) Physics of Semiconductor Devices. Environmental Science and Engineering(). Springer, Cham. https://doi.org/10.1007/978-3-319-03002-9_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-03002-9_13
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-03001-2
Online ISBN: 978-3-319-03002-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)