Skip to main content

Fabrication of Experimental Set-up and Testing

  • 1423 Accesses

Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSMANUFACT)

Abstract

Guner et al. (2004) have developed a cost effective approach to investigate brake system parameters. They have Investigated the dynamic and thermal behavior of the braking phenomenon by establishing a dynamic model. Roberts and Day (2000) have established a new systematic approach to design-evaluation-test product development cycle wherein the vehicle design and simulation environments are integrated. Limpert (1999) has developed models for determining the temperature rise during single stop, continuous and repeated braking. Ramachandra Rao et al. (1993) have simulated the temperature distribution and brake torque developed in a brake drum using finite element methods. They have observed a good agreement between the simulated results and the observations carried out using an inertia dynamometer. Ilinca et al. (2001) have determined the effect of contact area on the temperature distribution in brake drum which results in wear and deformation of brake drum.

Keywords

  • Temperature Rise
  • Cast Iron
  • Brake System
  • Grey Cast Iron
  • Vehicle Velocity

These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

This is a preview of subscription content, access via your institution.

Buying options

Chapter
USD   29.95
Price excludes VAT (USA)
  • DOI: 10.1007/978-3-319-02985-6_4
  • Chapter length: 15 pages
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
eBook
USD   54.99
Price excludes VAT (USA)
  • ISBN: 978-3-319-02985-6
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
Softcover Book
USD   69.99
Price excludes VAT (USA)
Fig. 4.1
Fig. 4.2
Fig. 4.3
Fig. 4.4
Fig. 4.5
Fig. 4.6
Fig. 4.7
Fig. 4.8
Fig. 4.9
Fig. 4.10
Fig. 4.11
Fig. 4.12
Fig. 4.13
Fig. 4.14
Fig. 4.15

References

  • Eriksson M, Bergman F, Jacobson S (2002) On the nature of tribological contact in automotive brakes. Wear 252:26–36

    CrossRef  Google Scholar 

  • Guner R, Yavuz N, Kopmaz O, Ozturk F, Korkmaz I (2004) Validation of analytical model of vehicle brake system. Int J Veh Des 35(4):340–348

    Google Scholar 

  • Ilinca A, Ilinca F, Falah B (2001) Numerical and analytical investigation of temperature distribution in a brake drum with simulated defects. Int J Veh Des 26(2/3):146–160

    Google Scholar 

  • Limpert R (1999) Brake design and safety. 2nd edn. SEA, Pennsylvania

    Google Scholar 

  • Ramachandra Rao VTVS, Rajaram LS, Seetharamu KN (1993) Temperature and torque determination in brake drums. Sadhana 18:963–983 Part 6

    Google Scholar 

  • Roberts SG, Day TD (2000) Integrating design and virtual test environments for brake component design and material selection. SAE technical paper series 2000-01-1294, Warrendale, PA 15096-0001, USA

    Google Scholar 

  • Ostermeyer GP (2003) On the dynamics of the friction coefficient. Wear 254:852–858

    CrossRef  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nanjappan Natarajan .

Rights and permissions

Reprints and Permissions

Copyright information

© 2015 The Author(s)

About this chapter

Cite this chapter

Natarajan, N., Krishnaraj, V., Davim, J.P. (2015). Fabrication of Experimental Set-up and Testing. In: Metal Matrix Composites. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-319-02985-6_4

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-02985-6_4

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-02984-9

  • Online ISBN: 978-3-319-02985-6

  • eBook Packages: EngineeringEngineering (R0)