Abstract
The principal aim of this work is to model a steady reactive flow in a gasification reactor using the Finite-Rate Approach within a computational fluid dynamics (CFD) framework. Using this model, the optimal conditions for hydrogen production during biomass steam gasification were determined. In addition, this model was utilized to simulate the effects of the reaction parameters (e.g. gasification temperature, steam to biomass ratio and adsorbent to biomass ratio) for the production of hydrogen. In this work, the hydrodynamic and reaction models were developed concurrently. The reaction model which was empirically validated was developed and implemented using ANSYS Fluent® V6.3. Some comparative analyses were carried out between the simulated and experimental results.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Florin, N.H., Harris, A.T.: Enhanced hydrogen production from biomass with in situ carbon dioxide capture using calcium oxide sorbents. Chem. Eng. Sci. 63, 287–316 (2008)
Mahishi, M.R., Sadrameli, M.S., Vijayaraghavan, S., Goswami, Y.D.: A novel approach to enhance the hydrogen yield of biomass gasification using CO2 adsorbent. J. Eng. Gas Turbines Power 130, 1–8 (2008)
Wu, W., Kawamoto, K., Kuramochi, H.: Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application. J. Mater Cycl. Waste Manag. 8, 70–77 (2006)
Faaij, A.: Modern biomass conversion technologies. Mitig. Adapt. Strat. Glob. Change 11, 343–375 (2006)
Bender, R.J., Tomassi, J.P., Asplund, F.: Variable moisture biomass gasification heating system and method. US Patent 6485296 (2002)
Kaneko, S., Sato, S., Kobayashi, Y., Kabata, T., Kobayashi, K., Takeuchi, Y., Takuda, K., Hashimoto, A., Shinoda, K., Takeno, K., Matsumoto, S., Ohta, H., Yamamoto, T., Sakai, M., Takegawa, T. and Seike, Y.: Biomass gasification furnace and system for methanol synthesis using gas produced by gasifying biomass. US Patent 6991769 B2 (2006)
Miccio, F., Svoboda, K., Schosger, J., Baxter, D.: Biomass gasification in internal circulating fluidized beds: a thermodynamic predictive tool. Korean J. Chem. Eng. 25, 721–726 (2008)
Shen, L., Gao, Y., Xiao, J.: Simulation of hydrogen production from biomass gasification in interconnected fluidized beds. Biomass Bioenergy 32, 120–127 (2008)
Koppatz, S., Pfeifer, C., Rauch, R., Hofbauer, H., Marquard-Moellenstedt, T., Specht, M.: H2 rich product gas by steam gasification of biomass with in situ CO2 adsorption in a dual fluidized bed system of 8 MW fuel input. Fuel Process. Technol. 90, 914–921 (2009)
Ajilkumar, A., Sundararajan, T., Shet, U.S.P.: Numerical modeling of a steam-assisted tubular coal gasifier. Int. J. Therm. Sci. 48, 308–321 (2009)
Marquard-Mollenstedt, T., Sichler, P., Specht, M., Michel, M., Berger, R., Hein, K.R.G., Hoftberger, E., Rauch, R., Hofbauer, H.: New approach for biomass gasification to hydrogen. In: 2nd World Conference on Biomass for Energy, Industry & Climate Protection, Rome, Italy (2004)
Pfeifer, C., Hofbauer, H.: Development of catalytic tar decomposition downstream from a dual fluidized bed biomass steam gasifier. Powder Technol. 180, 9–16 (2008)
Nemtsov, D.A., Zabaniotou, A.: Mathematical modelling and simulation approaches of agricultural residue air gasification in a bubbling fluidized bed reactor. Chem. Eng. J. 143, 10–31 (2008)
Nikoo, M.B., Mahinpey, N.: Simulation of biomass gasification in fluidized bed reactor using ASPEN PLUS. Biomass Bioenergy 32, 1245–1254 (2008)
Sadaka, S.S., Ghaly, A.E., Sabbah, M.A.: Two phase biomass air-steam gasification model for fluidized bed reactors: Part I-model development. Biomass Bioenergy 22, 439–462 (2002)
Wang, Y., Yan, L.: CFD simulation on biomass thermochemical conversion. Int. J. Mol. Sci. 9, 1108–1130 (2008)
Busciglio, A., Vella, G., Micale, G., Rizzuti, L.: Analysis of the bubbling behavior of 2D gas solid fluidized beds Part II. Comparison between experiments and numerical simulations via digital image analysis technique. Chem. Eng. J. 148, 145–163 (2009)
Fletcher, D.F., Haynes, B.S., Christo, F.C., Joseph, S.D.: A CFD based combustion model of an entrained flow biomass gasifier. Appl. Math. Model. 24, 165–182 (2000)
Deng, Z., Xiao, R., Jin, B., Huang, H., Shen, L., Song, Q., Li, Q.J.: Computational fluid dynamics modeling of coal gasification in a pressurized spout-fluid bed. Energy Fuels 22, 1560–1569 (2008)
Ji, P., Feng, W., Chen, B.: Production of ultrapure hydrogen from biomass gasification with air. Chem. Eng. Sci. 64, 582–592 (2009)
Wang, X., Jin, B., Zhong, W.: Three-dimensional simulation of fluidized bed coal gasification. Chem. Eng. Process. 48, 695–705 (2009)
Murthy, S., Fedorov, A.G.: Radiation heat transfer analysis of the monolith type solid oxide fuel cell. J. Power Source 124(24), 453–458 (2003)
Lv, P.M., Xiong, Z.H., Chang, J., Wu, C.Z., Chen, Y., Zhu, J.X.: An experimental study on biomass air-steam gasification in fluidized bed. Bioresour. Technol. 95, 95–101 (2004)
Gao, N., Li, A., Quan, C., Gao, F.: Hydrogen-rich gas production from biomass steam gasification in an updraft fixed-bed gasifier combined with a porous ceramic reformer. Int. J. Hydrogen Energy 33, 5430–5438 (2008)
Kalinci, Y., Hepbasli, A., Dincer, I.: Biomass-based hydrogen production: a review and analysis. Int. J. Hydrogen Energy 34, 8799–8817 (2009)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Tamidi, A.b.M., Shaari, K.Z.K., Ganesan, T. (2015). Reaction Modeling for Prediction of Hydrogen Production During Biomass Gasification. In: Shaari, K., Awang, M. (eds) Engineering Applications of Computational Fluid Dynamics. Advanced Structured Materials, vol 44. Springer, Cham. https://doi.org/10.1007/978-3-319-02836-1_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-02836-1_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-02835-4
Online ISBN: 978-3-319-02836-1
eBook Packages: EngineeringEngineering (R0)