Abstract
Manufacturing and handling of micro parts is a great challenge due to their small dimensions. Manufacturing processes and the state of knowledge in macro technologies are not smoothly transferable to the micro world. This can be justified, for example, by size effects and the related, changed component behaviour. It is assumed that known statistical distributions from macro range are changed, too, concerning to the changed behaviour and changed physical regularities in micro range. For that reason quality criteria for micro cups are described. By means of these selected criteria, parts are judged. Using the findings, statistical distribution models for the simulation of ladder linked parts production are determined.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Dickerhof, M., Kautt, M., Parusel, A., Anson, S., Gegenbach, U., Voges, U., Kaufmann, U., Schmidt, A., Bittner, K.: Globale MST – Ergebnisse der qualitativen Inhaltsanalyse. Karlsruher Institut für Technologie, Karlsruhe (2010) (in German)
Vollertsen, F.: Process Scaling. In: Proceedings of the 1st Colloquium of DFG Priority Program Process Scaling Strahltechnik, vol. 24, pp. 1–9 (2003)
Tracht, K., Schenck, C., Weikert, F., Kuhfuß, B.: Conveyance of micro-cold-formed parts in a linkage – Overcoming of size effects by connecting micro-cold-formed parts. Wt Werkstattstechnik Online 100(11/12), 864–868 (2010)
Tracht, K., Weikert, F., Hanke, T.: Modeling of linked parts in micro-forming transformation of product-defining data into a product model for ladder type linked parts. Wt Werkstattstechnik Online 101(11/12), 765–769 (2011)
Hesselbach, J., Raatz, A., Wrege, J., Hermann, H., Weule, H., Buchholz, C., Tritschler, H., Knoll, M., Elsner, J., Klocke, F., Weck, M., von Bodenhausen, J., von Klitzing, A.: mikroPRO - Untersuchung zum internationalen Stand der Mikroproduktionstechnik. Wt Werkstattstechnik Online 93(3), 119–128 (2003)
Vollertsen, F.: Size effects in manufacturing. Strahltechnik 24, 1–9 (2003)
Schlipf, M.: Statistische Prozessregelung von Fertigungs- und Messprozess zur Erreichung einer variabilitätsarmen Produktion mikromechanischer Bauteile. Shaker Verlag GmbH, Aachen (2009) (in German)
Kennerknecht, T., Straub, T., Funk, M., Cetinel, F., Härtelt, M., Eberl, C.: Zuverlässigkeit von mikrourgeformten und nanostrukturierten Materialien unter Berücksichtigung der besonderen Anforderungen an Mikrobauteile. In: Proceedings of the 5th Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, pp. 75–82 (2011) (in German)
Röger, J.: Mechanische Eigenschaften urgeformter Mikroproben aus CuAl10Ni5Fe4, ZrO2 und Si3N4, Dissertation, Karlsruher Institut für Technologie. Shaker Verlag GmbH, Aachen (2010) (in German)
Flosky, H., Vollertsen, F.: Wear behavior of a DLC-coated blanking and deep drawing tool combination. In: Clarke, R.B., Leacock, A.G., Duflou, J.R., Merklein, M., Micari, F. (eds.) Proceedings of the 15th International Conference on Sheet Metal (SheMet 2013), pp. 511–517. TransTech Publications, Zurich (2013)
DIN EN ISO 1101: Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Tolerierung von Form, Richtung, Ort und Lauf. Beuth-Verlag, Berlin (2006) (in German)
DIN EN ISO 8785: Geometrische Produktspezifikation (GPS) - Oberflächenunvollkommenheiten - Begriffe, Definitionen und Kenngrößen. Beuth-Verlag, Berlin (1999) (in German)
DIN 4760: Gestaltabweichungen, Begriffe, Ordnungssysteme. DIN Taschenbuch 1. Mechanische Technik-Grundnormen. Beuth-Verlag, Berlin (2004) (in German)
Flosky, H.: Bremer Institut für angewandte Strahltechnik GmbH (Personal Communication (July 12, 2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Weikert, F., Weyhausen, J., Tracht, K. (2014). Statistical Study for Micro Forming Technologies Used for Linked Parts Production. In: Zaeh, M. (eds) Enabling Manufacturing Competitiveness and Economic Sustainability. Springer, Cham. https://doi.org/10.1007/978-3-319-02054-9_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-02054-9_8
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-02053-2
Online ISBN: 978-3-319-02054-9
eBook Packages: EngineeringEngineering (R0)