Abstract
Problems connected with the reduction of thermal errors in the controllable axes of 5-axis machining centres are discussed. A strategy for improving machine tool thermal properties is proposed. The conditions for the accurate holistic modelling, simulation and compensation of thermal errors in controllable rotary axes for aircraft parts machining purposes are described.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abele, E., Altintas, Y., Brecher, C.: Machine tool spindle units. CIRP Ann. Manufact. Technol. 59(2), 781–802 (2010)
Mayr, J., Jedrzejewski, J., Uhlmann, E., et al.: Thermal issues in machine tools. CIRP Ann. Manufact. Technol. 61(2), 771–791 (2012)
Turek, P., Jedrzejewski, J., Modrzycki, W.: Methods of machine tool error compensation. J. Mach. Eng. 10(4), 5–26 (2010)
Kwasny, W., Turek, P., Jedrzejewski, J.: Survey of machine tool error measuring methods. J. Mach. Eng. 11(4), 7–38 (2011)
Schwenke, H., Knapp, W., Haitjema, H., et al.: Geometric error measurement and compensation of machines—an update. Ann. CIRP Ann. Manufact. Technol. 57(2), 660–675 (2008)
Jedrzejewski, J., Kwasny, W.: Knowledge base and assumptions for holistic modelling aimed at reducing axial errors of complex machine tools. J. Mach. Eng. 13(2), 7–25 (2013)
Jedrzejewski, J.: Thermal problems in machine tools design and operation. In: Mekid, S. (ed.) Introduction to precision machine design and error assessment, pp. 75–127. CRC Press, (2009)
Jedrzejewski, J., Kowal, Z., Kwasny, W., Modrzycki, W.: Hybrid model of high speed machining centre headstock. CIRP Ann. Manufact. Technol. 53(1), 285–288 (2004)
Jedrzejewski, J., Kwasny, W.: Modelling of angular contact ball bearings and axial displacements for high-speed spindles. CIRP Ann. Manufact. Technol. 59(1), 377–382 (2010)
Winiarski, Z., Kowal, Z., Kwasny, W., Ha, J.-Y.: Thermal model of the spindle drive structure. J. Mach. Eng. 10(4), 41–52 (2010)
Blazejewski, A., Kwasny, W., Jedrzejewski, J., Gim, T.-W.: Modelling thermal deformation of tilting rotary table with direct drive system. J. Mach. Eng. 10(4), 26–40 (2010)
Koyama, M.: Minimum quantity and cooling jet lubricated angular contact ball bearings for machine tool. NTN Tech. Rev. 74, 24–27 (2006)
Lee, S.-W., Maeda, T.: Angular contact ball bearings that require a minimum quantity of grease supply for lubrication. NTN Tech. Rev. 75, 90–95 (2008)
Acknowledgments
This research is supported by Ministry of Science and Education of Poland, Ministry of Knowledge Economy—Republic of Korea and NCBiR (Project: INNOTECH—K1/IN1/75/155671/NCBR/13).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Jedrzejewski, J., Kwasny, W. (2014). Machine Tool Thermal Errors Reduction for 5-axis Machining of Aircraft Parts. In: Denkena, B. (eds) New Production Technologies in Aerospace Industry. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-01964-2_25
Download citation
DOI: https://doi.org/10.1007/978-3-319-01964-2_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01963-5
Online ISBN: 978-3-319-01964-2
eBook Packages: EngineeringEngineering (R0)