Abstract
Next-generation high-end data processing systems such as Internet switches or servers approach aggregate bandwidth in excess of 1 Tb/s. The task of providing hundreds of individual links as speeds in excess of 10 Gb/s over the link distances becomes increasingly difficult for conventional copper-based interconnect technology. Optical interconnects are foreseen as a potential solution to improve the performance of data transmission on chip, PCB, and system levels. They carry data signals as modulation of optical intensity, through an optical waveguide, thus replacing traditional electrical interconnects. Optical devices can overcome the bottleneck imposed by the limited bandwidth of electronic circuits in areas such as computing, data storage, or telecommunication networks. The basic element of any optical circuit is the optical waveguide, which permits to connect optically different devices. To build integrated optical circuits that substitute micro-electronic circuits, integrated optical waveguides with light confinement in a size of the order of the wavelength are mandatory. Optical waveguides can be classified according to their geometry (planar, strip, or fiber waveguides), mode structure (single-mode, multimode), refractive index distribution (step or gradient index) and material (glass, polymer, or semiconductor). They are designed as energy flow only along the waveguiding structure but not perpendicular to it, so radiation losses can be avoided. Usually, optical integrated waveguides rely on the principle of total internal reflection, using materials with low absorption loss. The waveguide cross section should be as small as possible to permit high-density integration, functionally linking devices or systems or implementation of complex functionalities, such as splitters/combiners, couplers, AWGs, and modulators. A wide range of materials can be used, with their corresponding advantages and drawbacks. Current commercial devices are mostly based on silicon/silica waveguides, III–V compounds, and lithium niobate waveguides. Silicon waveguides offers the possibility of mass-manufacturing and a high level of integration, which would result in cheaper chips. Novel materials such as photonic crystals can provide advantages to fulfill the requirements for high-density photonic integration. This chapter will review fundamentals and design guides of optical waveguides, including state-of-the-art and challenges, fundamental theory and design methodology, fabrication techniques, as well as materials selection for different level waveguide components and integration structures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gang SY (2005) Polymer based optical waveguides. Master’s degree thesis, Universiti Teknologi Malaysia, Johor Bahru
Immonen M, Karppinen M, Kivilahti JK (2007) Investigation of environmental reliability of optical polymer waveguides embedded on printed circuit boards. Microelectron Reliab 47:363–371
Karasinski P (2004) Sol-gel derived optical waveguide films for planar sensors with phase modulation. Opt Appl 34(4):467–475
Karppinen M (2008) High bit-rate optical interconnects on printed wiring board: micro-optics and hybrid integration. Ph.D. dissertation, University of Oulu, VTT, Oulu
Kowach GR, Ramirez AG (2002) Advanced materials in telecommunications. In: Kutz M (ed) Handbook of materials selection. Wiley, New York
Kühner T, Schneider M (2007) Surface mounted coupling elements for PCB embedded optical interconnects. In: Proceedings of the 16th European microelectronics and packaging conference and exhibition (EMPC 2007), Oulu, 17–20 June 2007, pp 253–257
Lamontagne B (2007) Enabling fabrication technologies for planar waveguides devices. In: Calvo ML, Lakshminarayanan V (eds) Optical waveguides. Taylor & Francis Group, New York, pp 271–307
Li G (2004) Waveguides produced by ultra-short laser pulses inside lithium niobate. Master thesis, National University of Singapore. http://scholarbank.nus.edu.sg/handle/10635/14143. Accessed 26 March 2008
Litchinitser N, Iakhnine V (2011) Optical waveguides: numerical modeling. http://optical-waveguides-modeling.net. Accessed 12 Sept 2011
Ma H et al (2002) Polymer-based optical waveguides: materials, processing, and devices. Adv Mater 14(19):1339–1365
Miller DAB (2000) Rationale and challenges for optical interconnects to electronic chips. Proc IEEE 88(6):728–749
Okamoto K (2006) Fundamentals of optical waveguides, 2nd edn. Elsevier, Amsterdam
Patela S (2003) Fabrication methods of planar waveguides and related structures. http://www-old.wemif.pwr.wroc.pl/spatela/pdfy/0380.pdf. Accessed 3 March 2011
Saleh BEA, Teich MC (1991) Fundamentals of photonics. Wiley series in pure and applied optics, vol 45. Wiley, New York
Spire (2011) Ion implantation. Spire Corporation, Bedford. http://www.spirecorp.com/spire-biomedical/surface-modification-technology/ion-implantation.php. Accessed 9 Dec 2011
Tong XC (2011) Advanced materials for thermal management of electronic packaging. Springer, New York
Yimit A et al (2005) Thin film composite optical waveguides for sensor applications: a review. Talanta 65:1102–1109
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Tong, X.C. (2014). Fundamentals and Design Guides for Optical Waveguides. In: Advanced Materials for Integrated Optical Waveguides. Springer Series in Advanced Microelectronics, vol 46. Springer, Cham. https://doi.org/10.1007/978-3-319-01550-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-01550-7_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01549-1
Online ISBN: 978-3-319-01550-7
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)