Abstract
The system is designed on the basis of Question B from 2011 National Undergraduate Electronic Design Contest-plate control system based on free pendulum. The system measures the angle change of the pendulum using the rotary encoder to control the motor mounted on the end of the pendulum in order to make the plate fixed on the motor shaft stable, ensuring that coins on the plate are stable. According to the trigonometric relation among the angle and direction of pendulum, the angle of the plate, and the distance between the pendulum and the light point from the laser pen fixed on the plate, the system controls the angle of the plate and makes the laser pen irradiate on the central line. When the pendulum swings freely, the system uses the PID algorithm to control the angle of the plate, so that the laser pen always irradiates on the central line. The experimental data show that the angle error is less than 5° during the rotation of the plate, and eight coins on the plate can keep in the stacked state when the pendulum swings freely within the range of ±60°, and the offset between the light point and the target is less than 3 cm during the free swing of the pendulum. The system won the national first prize in National Undergraduate Electronic Design Contest of China.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bo W, Wenchang H, Zhichao W et al (2012) Analysis and design of a free pendulum flat-panel control system. Electron Technol 8:43–46
Zhanlin C, Xiaosuo W (2012) The dynamical equilibrium control system for free swing of a plate. Automation & Instrumentation 3:179–180
Jiuyuan G, Yuyang B, Jiahui L (2011) The flat control system based on the free pendulum– 2011 National undergraduate electronic design contest B of undergraduate group. Electronics World 15:10–12
Zhen L, Yubing Z, Jingjing H et al (2012) Panel control system based on the free pendulum. Sensor World 1:13–16
Yulong G (2012) Design of flat-panel control system of free pendulum. Physics Experimentation 32(6):40–46
Ming W, Yanji H, Junhua W et al (2007) Application of incremental revolving encoder in impulse measurement with compound pendulum. Chinese Journal of Scientific Instrument 28(1):140–144
Hongjun B (2011) The development of the nonlinear wire-wound potentiometers. University of Electronic Science and Technology of China, 4–17
Ning W, Zhuolin D, Ye Z (2012) Panel control system based on the free pendulum. Electr Eng 4:87–91
Yang Z, Lei W, Tao Z (2010) Control-oriented correlation analysis identification for servo systems with friction. Journal of Electronic Measurement and Instrument 24(9):814–818
Wei H, Jian R, Sheng L et al (2012) Dual-loop control system of DC servo motor based on DSP. Journal of Mechanical & Electrical Engineering 29(1):70–73
Qiyuan W, Xiaogang R (2012) Dual loop nonlinear PID control of single-wheeled robot. Control and Decision 27(4):593–597
Ping H, Zhanxia Z, Weihua M (2012) Design and simulation of servo system based on self-adaptive fuzzy PID control. Computer Simulation 29(1):138–142
Xiyin L, Jianping L, Xiujuan D et al (2012) Design of free place flat control system based on the ARM9. Microcomputer & Its Applications 31(8):81–83
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Hao, L., Zhao, X., Liang, S. (2014). Control System by Laser Positioning Based on Free Pendulum. In: Zhang, B., Mu, J., Wang, W., Liang, Q., Pi, Y. (eds) The Proceedings of the Second International Conference on Communications, Signal Processing, and Systems. Lecture Notes in Electrical Engineering, vol 246. Springer, Cham. https://doi.org/10.1007/978-3-319-00536-2_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-00536-2_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-00535-5
Online ISBN: 978-3-319-00536-2
eBook Packages: EngineeringEngineering (R0)