Abstract
For small-scale microseismic events, the source sizes provided by shear models are unrealistically large when compared to visual observations of rock fractures near underground openings. A detailed analysis of the energy components in data from a mine-by experiment and from some mines showed that there is a depletion of S-wave energy for events close to the excavations, indicating that tensile cracking is the dominant mechanism in these microseismic events.
In the present study, a method is proposed to estimate the fracture size from microseismic measurements. The method assumes tensile cracking as the dominant fracture mechanism for brittle rocks under compressive loads and relates the fracture size to the measured microseismic energy. With the proposed method, more meaningful physical fracture sizes can be obtained and this is demonstrated by an example on data from an underground excavation with detailed, high-quality microseismic records.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Bieniawski, Z. T. (1967), Mechanism of Brittle Fracture of Rock, Parts I, II and III, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 4 (4), 395–430.
Boatwright, J., and Fletcher, J. B. (1984), The Partition of Radiated Energy between P and S Waves, Bull. Seismol. Soc. Am. 74, 361–376.
Brace, W. F., Paulding, B., and Scholz, C. (1966), Dilatancy in the Frature of Crystalline Cracks, J. Geophys. Res. 71, 3939–3953.
Broek, D., Elementary Engineering Fracture Mechanics (Martinus Nijhoff Publishers, the Hague 1982).
Brune, J. N. (1970), Tectonic Stress and the Spectra of Seismic Shear Waves from Earthquakes, J. Geophys. Res. 75, 4997–5009.
Cundall, P. A., Potyondy, D. O., and Lee, C. A., Micromechanics-based models for fracture and breakout around the Mine-by tunnel. In Proc. Int. Conf: on Deep Geological Disposal of Radioactive Waste (eds. Martino, J. B., and Martin, C. D. ) (Canadian Nuclear Society, Toronto 1996) pp. 113–122.
Diederichs, M. S. (1998), Rock mass stability and support design for deep excavations in hard rocks (in progress). Ph. D. Thesis, Dept. of Civil Eng. University of Waterloo, Waterloo, Ontario, Canada.
Ecobichon, D., Hudyma, M., and Laplante, B. (1992), Understanding Geomechanics Problems through Microseismic Monitoring at Lac Shortt, Rock Mechanics and Strata Control Session, Proceedings of the 94th Annual General Meeting of the CIM, Montreal, April, pp. 1–13.
Ewe, R. T., and Cook, N. G. W. (1990a), Deformation and Fracture around Cylindrical Openings in Rock—I, Observations and Analysis of Deformations, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 27, 387–407.
Ewy, R. T., and Cook, N. G. W. (1990b), Deformation and Fracture around Cylindrical Openings in Rock—II, Initiation, Growth and Interaction of Fractures, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 27, 407–427.
Falls, S. D., and Young, R. P., Comparison of excavation disturbance around deep tunnels in hard rock using acoustic emission and ultrasonic velocity methods. In Proc. Excavation Disturbed Zone Workshop (eds. J. B. Marino, and Martin, C. D. ) (Canadian Nuclear Society, Toronto 1996) pp. 77–86.
Feignier, B., and Young, R. P. (1992) Moment Tensor Inversion of Induced Microseismic Events: Evidence of Non-shear Failures in the -4 < M <-2 Moment Magnitude Range, Geophys. Res. Lett. 19 (14), 1503–1506.
Feignier, B., and Young, R. P. (1993), Source Mechanism Studies at the Underground Research Laboratory, Report to AECL, RP021AECL, Queen’s University, Kingston, Ontario.
Glbowlcz, S. J., and Kijko, A., An Introduction to Missing Seismology (Academic Press, 1994).
Gibowicz, S. J., Young, R. P., Talebi, S., and Rawlence, D. J. (1991), Source Parameters of Seismic Events at the Underground Research Laboratory in Manitoba, Canada: Scaling Relations for the Events with Moment Magnitude Smaller than - 2, Bull. Seismol. Soc. Am. 81, 1157–1182.
Griffith, A. A. (1921), The Phenomena of Rupture and Flow in Solids, Phil. Trans. Roy. Soc. of London A221, 163–197.
Griffith, A. A. (1924), The Theory of Rupture, Proc. Ist Int. Conf. Applied Mech., Delft, 55–93.
Hoek, E. (1965), Rock Fracture under Static Stress Conditions, CSIR Report MEG 383, National Mechanical Eng. Research Institute, Council for Scientific and Industrial Research, Pretoria, South Africa.
Hoek, E. Brittle failure of rocks in rock mechanics in engineering practice. In Rock Mechanics in Engineering Practice (eds. Stagg, K. G., and Zienkiewicz, O. C. ) (John Willey and Sons 1968) pp. 99–124.
Horii, H., and Nemat-Nasser, S. (1985), Compression-induced Microcrack Growth in Brittle Solids: Axial Splitting and Shear Failure, J. Geophys. Res. 90 (B4), 3105–3125.
Kaiser, P. K., and Maloney, S. M. (1997), Scaling Laws for the Design of Rock Support, Pure appl. geophys. 150, 415–434.
Lajtai, E. Z., Carter, B. J., and Ayari, M. L. (1990), Criteria for Brittle Fracture in Compression, Engin. Fract. Mech. 37 (1), 25–49.
Lee, M. Y., and Haimson, B. C. (1993), Laboratory Study of Borehole Breakouts in Lac du Bonnet Granite: A Case of Extensile Failure Mechanism, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 30 (7), 1039–1045.
Lockner, D. A., Byerlee, J. D., Kuksenko, V., Ponomarev, A., and Sidorin, A., Observation of quasi-static fault growth from acoustic emissions. In Fault Mechanics and Transport Properties of Rocks (eds. EVANS, B., and WONG, T. -f. ) (Academic Press 1992) pp. 3–31.
Madariaga, R. (1976), Dynamics of an Expending Circular Fault, Bull. Seismol. Soc. Am. 66, 639–666.
Martin, C. D. (1997), Seventeenth Canadian Geotechnical Colloquium: The Effect of Cohesion Loss and Stress Path on Brittle Rock Strength, Canadian Geotech. J. 34 (5), 698–725.
Martin, C. D., and Chandler, N. A. (1994), The Progressive Fracture of Lac du Bonnet Granite, Int. J. Rock Mech. Min. Sci. 31, 643–659.
Martin, C. D., Kaiser P. K., and McCreath, D. R. (1998), Hoek-Brown Parameters for Predicting the Depth of Brittle Failure around Tunnels, Canadian Geotechnical Journal, accepted for publication in 1999 Feb. issue.
Martin, C. D., and Read, R. S. (1996), AECL’s Mine-by Experiment: A Test Tunnel in Brittle Rock,Proc. 2nd North American Rock Mech. Symposium (eds. Aubertin, Hassani and Mitri), 1, 13–24.
Martin, C. D., Read, R. S., and Martino, J. B. (1997), Observation of Brittle Failure around a Circular Test Tunnel, Int. J. Rock Mech. Min. Sci. 34, 1065–1073.
McGarr, A., Some applications of seismic source mechanism studies to assessing underground hazard. In Rockburst and Seismicity in Mines (eds. Gay, N. C., and Wainwright, E. H. ), Symp. Ser. 6 (South Africa Inst. Min. Metal 1984) pp. 199–208.
Mendecki, A. J., Quantitative seismology and rock mass stability. In Seismic Monitoring in Mines (ed. Mendecki, A. J. ) (Chapman and Hall, London 1997) Chapter 10, pp. 178–219.
Myer, L. R., Kemeny, J. M., Zheng, Z., Suarez, R., Ewy, R. T., and Cook, N. G. W. (1992), Extensive Cracking in Porous Rock under Differential Compressive Stress, Appl. Mech. Rev. 45, 263–280.
Olsson, O. L., and Winberg, A., Current understanding of extent and properties of the excavation disturbed zone and its dependence of excavation method, In Proc. Int. Conf. on Deep Geological Disposal of Radioactive Waste (eds. Martino, J. B., and Martin, C. D. ) (Canadian Nuclear Society, Toronto 1996) pp. 101–112.
Ortlepp, W. D., Rock Fracture and Rockbursts—An Illustrative Study, Monograph Series M9 (The South African Institute of Mining and Metallurgy, Johannesburg, 1997).
Randall, M. J. (1973), The Spectral Theory of Seismic Source, Bull. Seismol. Soc. Am. 63, 1133–1144.
Read, R. S., and Martin, C. D. (1996), Technical Summary of AECL’s Mine-by Experiment, Phase 1: Excavation Response, AECL (AECL-11311, COG-95–171).
Revalor, R., Josien, J. P., Besson, J. L., and Macron, A., Seismic and seismoacoustic experiments applied to the prediction of rockbursts in French coal mines. In Rockbursts and Seismicity in Mines (ed. C. Fairhurst) (Balkema, Rotterdam 1990) pp. 301–306.
Sato, T. (1978), A Note on Body-wave Radiation from Expanding Tension Crack, Sci. Rep. Tohoku Univ., Ser. 5, Geophys. 25, 1–10.
Scholz, C. H., The Mechanics of Earthquakes and Faulting (Cambridge University Press 1990).
Stacey, T. R. (1981), A Simple Extension Strain Criterion for Fracture of Brittle Rock, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 18, 469–474.
Talebi, S. (1993), Source Studies of Mine-induced Seismic Events over a Broad Magnitude Range (-4<M<4), CANMET, Report MRL 93–046 (CL).
Talebi, S., and Young, R. P., Failure Mechanism of Crack Propagation Induced by Shaft Excavation at the Underground Research Laboratory. In Proc. Int. Conf. on Rock Mech. and Rock Physics at Great Depth (eds. Maury, V., and Fourmaintraux, D. ) (A. A. Balkema, Rotterdam 1989), 2, 719–726.
Talebi, S., and Young, R. P. (1992), Microseismic Monitoring in Highly Stressed Granite: Relation between Shaft-wall Cracking and in situ Stress, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 29, 25–34.
Truifu, C. I., Urbancic, T. I., and Young, R. P. (1995), Source Parameters of Mining-induced Seismic Event: An Evaluation of Homogeneous and Inhomogeneous Faulting Model for Assessing Damage Potential, Pure appl. geophys. 145 (1), 3–27.
Urbancic, T. J., Young, R. P., Bird, S., and Bawden, W. (1992), Microseismic source parameters and their use in characterizing rock mass behavior: Consideration from Strathcona mine, In Proc. AGM-CIM, May, 36–47.
Wiles, T., Map 3-D User’s Manual (Mine Modeling Limited 1996).
Wong, T. F. (1982), Micromechanics of Faulting in Westerly Granite, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 19, 49–64.
Young, R. P. (1993), Seismic Methods Applied to Rock Mechanics, ISRM News J. 1 (3), 4–18.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Basel AG
About this chapter
Cite this chapter
Cai, M., Kaiser, P.K., Martin, C.D. (1998). A Tensile Model for the Interpretation of Microseismic Events near Underground Openings. In: Talebi, S. (eds) Seismicity Caused by Mines, Fluid Injections, Reservoirs, and Oil Extraction. Pageoph Topical Volumes. Birkhäuser, Basel. https://doi.org/10.1007/978-3-0348-8804-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-0348-8804-2_5
Publisher Name: Birkhäuser, Basel
Print ISBN: 978-3-7643-6048-1
Online ISBN: 978-3-0348-8804-2
eBook Packages: Springer Book Archive