Abstract
The Load-Unload Response Ratio (LURR) method is an intermediate-term earthquake prediction approach that has shown considerable promise. It involves calculating the ratio of a specified energy release measure during loading and unloading where loading and unloading periods are determined from the earth tide induced perturbations in the Coulomb Failure Stress on optimally oriented faults. In the lead-up to large earthquakes, high LURR values are frequently observed a few months or years prior to the event. These signals may have a similar origin to the observed accelerating seismic moment release (AMR) prior to many large earthquakes or may be due to critical sensitivity of the crust when a large earthquake is imminent. As a first step towards studying the underlying physical mechanism for the LURR observations, numerical studies are conducted using the particle based lattice solid model (LSM) to determine whether LURR observations can be reproduced. The model is initialized as a heterogeneous 2-D block made up of random-sized particles bonded by elastic-brittle links. The system is subjected to uniaxial compression from rigid driving plates on the upper and lower edges of the model. Experiments are conducted using both strain and stress control to load the plates. A sinusoidal stress perturbation is added to the gradual compressional loading to simulate loading and unloading cycles and LURR is calculated. The results reproduce signals similar to those observed in earthquake prediction practice with a high LURR value followed by a sudden drop prior to macroscopic failure of the sample. The results suggest that LURR provides a good predictor for catastrophic failure in elastic-brittle systems and motivate further research to study the underlying physical mechanisms and statistical properties of high LURR values. The results provide encouragement for earthquake prediction research and the use of advanced simulation models to probe the physics of earthquakes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bowman, D. D., Ouillon, G., Sammis, C. G., Sornette, A., and Sornette, D. (1998), An Observational Test of the Critical Earthquake Hypothesis, J. Geophys. Res. 103, 24,359-24,372.
Bufe, C. G. and Varnes, D. J. (1993), Predictive Modeling of the Seismic Cycle in the Greater San Francisco Bay Region, J. Geophys. Res. 98, 9,871-9,833.
Mora, P. and Place, D. (1994), Simulation of the Frictional Stick-slip Instability, Pure Appl. Geophys. 143, 61-87.
Mora, P. and Place, D. (1998), Numerical Simulation of Earthquake Faults with Gouge: Towards a Comprehensive Explanation of the Heat Flow Paradox, J. Geophys. Res. 103, 21,067-21,089.
Mora, P. and Place, D. (1999), The Weakness of Earthquake Faults, Geophys. Res. Lett. 26, 123-126.
Mora, P. and Place, D. (2002), Stress Correlation Function Evolution in Lattice Solid Elasto-dynamic Models of Shear and Fracture Zones and Earthquake Prediction, Pure Appl. Geophys. 159, 2413-2426.
Place, D. and Mora, P. (1999), A Lattice Solid Model to Simulate the Physics of Rocks and Earthquakes:Incorporation of Friction, J. Comp. Phys. 150, 1-41.
Place, D. and Mora, P. (2000), Numerical Simulation of Localisation Phenomena in a Fault Zone, Pure Appl. Geophys. 157, 1821-1845.
Place, D. and Mora, P. (2001), A random lattice solid model for simulation of fault zone dynamics and fracture processes. In Bifurcation and Localisation Theory for Soils and Rocks’99 (eds., Mühlhaus H-B., Dyskin, A. V. and Pasternak, E.), (AA Balkema, Rotterdam/Brookfield. 2001).
Place, D., Lombard, F., Mora, P., and Abe, S. (2002), Simulation of the Micro-physics of Rocks Using LSMearth, Pure Appl. Geophys. 159, 1911-1932.
Wei, Y. J., Xia, M. F., Ke, F. J., Yin, X. C., and Bai, Y. L. (2000), Evolution Induced Catastrophe and its Predictability, Pure Appl. Geophys. 157, 1945-1957.
Yin, X. C., Chen, X. Z., Song, Z. P., and Yin, C. (1995)A New Approach to Earthquake Prediction: The Load/Unload Response Ratio (LURR) theory, Pure Appl. Geophys. 145, 701-715
Yin, X. C., Wang, Y. C., Peng, K. Y., and Bai, Y. L. (2000), Development of a New Approach to Earthquake Prediction: LoadlUnload Response Ratio (LURR) Theory, Pure Appl. Geophys. 157, 2365-2383.
Yin, X. C., Mora, P., Peng, K. Y., Wang, Y. C., and Weatherley, D. (2002), Load-Unload Response Ratio and Accelerating Moment (energy) Release Critical Region Scaling and Earthquake Prediction, Pure Appl. Geophys. 159, 2511-2523.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Basel AG
About this chapter
Cite this chapter
Mora, P., Wang, Y.C., Yin, C., Place, D., Yin, XC. (2002). Simulation of the Load-Unload Response Ratio and Critical Sensitivity in the Lattice Solid Model. In: Matsu’ura, M., Mora, P., Donnellan, A., Yin, Xc. (eds) Earthquake Processes: Physical Modelling, Numerical Simulation and Data Analysis Part II. Pageoph Topical Volumes. Birkhäuser, Basel. https://doi.org/10.1007/978-3-0348-8197-5_18
Download citation
DOI: https://doi.org/10.1007/978-3-0348-8197-5_18
Publisher Name: Birkhäuser, Basel
Print ISBN: 978-3-7643-6916-3
Online ISBN: 978-3-0348-8197-5
eBook Packages: Springer Book Archive