Abstract
The heavy ion accelerator combination VICKSI being built at the Hahn-Meitner-Institut in Berlin consists of a 6 MV single stage van de Graaff accelerator injecting into a 4 sector split pole cyclotron with a mass energy product of K=120. The primary design aim for this accelerator system is to reach 200 MeV for Carbon to Argon ions. The original HVEC Model CN Van de Graaff including the high voltage terminal with ion source is undergoing major reconstruction to achieve the necessary heavy ion performance. All parts of the beam matching system between the two accelerators have been ordered including the stripper and the two bunchers. The cyclotron is built by Scanditronix/Sweden. Three main magnets are completely assembled at the factory for field mapping. Mounting of the first RF-system will be finished around October. Installation of the cyclotron in Berlin is scheduled for 1976 and first trials with beam are anticipated for February 77. The new building for the cyclotron including power- and cooling installation will be ready in 75. Most of the electronics for the computer control of the complete system are delivered. The beam handling between the cyclotron and the target has been designed in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
VICKSI-Proposal, HMI-report B-118 (1972)
B. Efken, D. Hilscher, H. Homeyer, U. Jahnke, K.H. Lindenberger, H.-E. Mahnke, K.H. Maier, J.A. Scheer and S. Holm A.I.P. Conference Proceedings No. 9 of the Cyclotron Conference 1972 in Vancouver
D. Hilscher et al., IEEE Trans. Nucl. Sci. NS-22, No. 3, June 75, p. 1643
Bereich Kern-und Strahlenphysik, Hahn-Meitner-Institut, Wissenschaftlicher Ergebnisbericht 1, 1974, HMI-report HMI-B163, 1975
VICKSI-Statusbericht 4, internal HMI-report
U. Jahnke, HMI-report HMI-B158, 1974
U. Janetzki, HMI-report HMI-B167, 1975
P. Arndt, W. Jenter, and H.-E. Mahnke IEEE Trans. Nucl. Sci. NS-22, No.3, June75, p.1715
G. Hinderer, K.H. Maier, IEEE Trans. Nucl. Sci. NS-22, No. 3, June 75, p. 1722
G. Hinderer, HMI-report HMI-B165, 1975
B. Efken, D. Hahn, D. Hilscher, and G.Wüstefeld Nucl. Instr. Meth. in press
B. Efken, D. Hahn, D. Hilscher, and G.Wüstefeld Nucl. Instr. Meth. in press
L. Meyer, Phys. Stat. Sol. 44 (1971) 253
C. Benvenuti, J.Vac.Sci. Technol. 11(1974)591
S. Lindbäck et al. contribution D.21 to this conference
W. Schulte contribution D.47 to this conference
F. Hinterberger, B. Efken, G. Hinderer and K.H. Maier Nucl. Instr. Meth. 121 (1974) 525
F. Hinterberger, HMI-report HMI-Bl 35, 1973
W. Busse contribution H.36 to this conference
W. Busse, H. Kluge, IEEE Trans. Nucl. Sci. NS-22, No. 3, June 75, p. 1109
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1975 Springer Basel AG
About this chapter
Cite this chapter
Maier, K.H. (1975). Status of the VICKSI Project. In: Joho, W. (eds) Seventh International Conference on Cyclotrons and their Applications. Experientia Supplementum, vol 24. Birkhäuser, Basel. https://doi.org/10.1007/978-3-0348-5520-4_10
Download citation
DOI: https://doi.org/10.1007/978-3-0348-5520-4_10
Publisher Name: Birkhäuser, Basel
Print ISBN: 978-3-0348-5522-8
Online ISBN: 978-3-0348-5520-4
eBook Packages: Springer Book Archive