Abstract
The research in this paper focused on (i) to increase the knowledge about the strategic role of automation technology and (ii) how automation technology investment decisions can be aligned with the strategy in manufacturing SMEs. This paper describes the design, application, and evaluation of the Strategic Development Map (SDM) in three settings, whereof two manufacturing SMEs. The SDM was also applied in more than 500 SMEs in a Swedish initiative called the Robot Lift. The SDM was derived from existing literature about Toyota management principles and thereafter adapted to the topic. The process of designing, testing, and evaluating the tool was inspired by design science research. It also contains explanations of the outcomes and mechanisms that lead to the successful adaptation and use of the SDM. The SDM provides a structured guidance process to understand the strategic role of automation technology investments in SMEs. This process can support companies towards a deeper understanding of the current state, target state and obstacles and challenges to reach the target with a focus on automation technology investments. The SDM was emphasized by companies and external coaches as very simple to understand and use. Using the SDM increased involvement and knowledge about strategic role of automation technology.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Buerkle, A., et al.: Towards industrial robots as a service (IRaaS): flexibility, usability, safety, and business models. Robot. Comput.-Integr. Manufact. 81, 102484 (2023)
Löfving, M., Almström, P., Jarebrant, C., Wadman, B., Widfeldt, M.: Evaluation of flexible automation for small batch production. Procedia Manufacturing 25, 177–184 (2018)
Perzylo, A., et al.: SMErobotics: smart robots for flexible manufacturing. IEEE Robot. Autom. Mag. 26(1), 78–90 (2019)
OECD: SMEs, Entrepreneurship and Innovation, Organisation for Economic Co-operation and Development, Paris (2010)
Ates, A., Garengo, P., Cocca, P., Bititci, U.: The development of SME managerial practice for effective performance management. J. Small Bus. Enterp. Dev. 20(1), 28–54 (2013)
Säfsten, K., Winroth, M., Stahre, J.: The content and process of automation strategies. Int. J. Prod. Econ. 110(1–2), 25–38 (2007)
Ortega, C.H., Garrido-Vega, P., Dominguez Machuca, J.A.: Analysis of interaction fit between manufacturing strategy and technology management and its impact on performance. Int. J. Oper. Prod. Manag. 32(8), 958–981 (2012)
Thomassen, M.K., Sjøbakk, B., Alfnes, E.: A strategic approach for automation technology initiatives selection. In: Grabot, B., Vallespir, B., Gomes, S., Bouras, A., Kiritsis, D. (eds.) Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World. APMS 2014. IFIP Advances in Information and Communication Technology, vol. 440. Springer, Heidelberg (2014). https://doi.org/10.1007/978-3-662-44733-8_36
Afolayan, A.O., De la Harpe, A.C.: The role of evaluation in SMMEs’ strategic decision-making on new technology adoption. Technol. Anal. Strategic Manag. 32(6), 697–710 (2020)
Hudson Smith, M., Smith, D.: Implementing strategically aligned performance measurement in small firms. Int. J. Prod. Econ. 106(2), 393–408 (2007)
Iakymenko, N., Alfnes, E., Thomassen, M.K.: A differentiated approach for justification of advanced manufacturing technologies. Adv. Manufact. 4, 257–267 (2016)
Hamzeh, R., Xun, X.: Technology selection methods and applications in manufacturing: a review from 1990 to 2017. Comput. Ind. Eng. 138, 106123 (2019)
Borges, L.A., Tan, K.H.: Incorporating human factors into the AAMT selection: a framework and process. Int. J. Prod. Res. 55(5), 1459–1470 (2017)
Granlund, A., Jackson, M.: Managing automation development projects: a comparison of industrial needs and existing theoretical support. In: Azevedo, A. (eds.) Advances in Sustainable and Competitive Manufacturing Systems. Lecture Notes in Mechanical Engineering. Springer, Heidelberg (2013). https://doi.org/10.1007/978-3-319-00557-7_63
Epping, K., Zhang, H.: A sustainable decision-making framework for transitioning to robotic welding for small and medium manufacturers. Sustainability 10(10), 3651 (2018)
Leandersson, C.: Slututvärdering Robotlyftet, (in Swedish) (2022). https://www.automationregion.com/positiva-resultat-fran-robotlyftet/. Accessed 18 Apr 2023
Denyer, D., Tranfield, D., Van Aken, J.E.: Developing design propositions through research synthesis. Organ. Stud. 29, 393–413 (2008)
Swedprod guide. www.edig.nu/sweprod (in Swedish). Accessed 20 Apr 2023
Löfving, M., Almström, P., Jarebrant, C., Wadman, B., Widfeldt, M.: Guide for automation of low volume production. In: Proceedings of the Swedish Production Symposium, vol. 13, pp. 13–23 (2020)
Simon, H.A.: The Science of the Artificial. MIT, Cambridge (1969)
Holmström…
Produktionslyftet. www.produktionslyftet.se. Accessed 19 Apr 2023
Rother, M.: Toyota Kata: Managing People for Improvement, Adaptiveness, and Superior Results. MGH, New York (2010)
Liker, J.K.: Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer. McGraw-Hill, NY (2021)
Vinten, G.: Participant observation: a model for organizational investigation? J. Manag. Psychol. 9(2), 30–38 (1994)
Robotlyftet. https://swira.se/robotlyftet-en-framgangsrik-modell-for-utveckling. Accessed 14 June 2023
Acknowledgement
The authors wish to thank VINNOVA, the Swedish Governmental Agency for Innovation Systems for their financial support that enabled the research studies. The first author also wishes to thank KK-foundation for their financial support in the call “Recruitments”.
The authors owe deep gratitude to the companies and external coach that participated in these research projects as well to Robotlyftet.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 IFIP International Federation for Information Processing
About this paper
Cite this paper
Löfving, M., Almström, P., Jarebrant, C., Widfeldt, M. (2023). Design and Application of a Development Map for Aligning Strategy and Automation Decisions in Manufacturing SMEs. In: Alfnes, E., Romsdal, A., Strandhagen, J.O., von Cieminski, G., Romero, D. (eds) Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. APMS 2023. IFIP Advances in Information and Communication Technology, vol 689. Springer, Cham. https://doi.org/10.1007/978-3-031-43662-8_17
Download citation
DOI: https://doi.org/10.1007/978-3-031-43662-8_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-43661-1
Online ISBN: 978-3-031-43662-8
eBook Packages: Computer ScienceComputer Science (R0)
