Skip to main content
SpringerLink
Log in

Design Calculation of Electrohydraulic Servo Drive for Technological Equipment

  • Conference paper
  • First Online:
Advances in Design, Simulation and Manufacturing III (DSMIE 2020)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

Abstract

The engineering method for design calculation of electrohydraulic servo drive with throttle regulation is proposed. The method is adapted on drives of technological equipment, in particular, equipment for mechanical processing of materials. The engineering method allows determining the main parameters and choosing elements and devices of the drive, to predict its static and dynamic characteristics. As the input data are considered: maximum loading; maximum tracking speed without load; maximum tracking error (or allowable tracking error at maximum speed); piston stroke; reduced mass of moving parts. The method includes the following main stages: construction of the drive settlement scheme, choice of the working fluid and the nominal working pressure; calculation of the constructive parameters and choice of the hydraulic cylinder; choice of the electrohydraulic amplifier; definition of the feedback parameters, determining the drive quality factor and calculation the transfer coefficient of the electronic block; evaluation of the drive static characteristics, calculation of the speed and load characteristics; construction of the drive linear model, stability assessment; research of the drive dynamic characteristics and the control quality, drive correction. The example of the design calculation of the electrohydraulic servo drive for technological equipment is presented. For calculations used the MATLAB application package.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 169.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Navrotskiy, K.: Theory and Designing Hydro- and Pneumodrives. Machinery Engineering, Moscow (1991)

    Google Scholar 

  2. Karpus, V., Ivanov, V., Dehtiarov, I., Zajac, J., Kurochkina, V.: Technological assurance of complex parts manufacturing. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE 2018. LNME, pp. 51–61. Springer, Cham (2019)

    Google Scholar 

  3. Sokolov, V., Krol, O., Stepanova, O.: Automatic control system for electrohydraulic drive of production equipment. In: 2018 International Russian Automation Conference (RusAutoCon). IEEE (2018)

    Google Scholar 

  4. Fesenko, A., Basova, Y., Ivanov, V., Ivanova, M., Yevsiukova, F., Gasanov, M.: Increasing of equipment efficiency by intensification of technological processes. Periodica Polytechnica Mech. Eng. 63(1), 67–73 (2019)

    Article  Google Scholar 

  5. Fedorovich, V., Mitsyk, A.: Mathematical simulation of kinematics of vibrating boiling granular medium at treatment in the oscillating reservoir. Key Eng. Mater. 581, 456–461 (2014)

    Article  Google Scholar 

  6. Rydberg, K.-E.: Hydraulic Servo Systems: Dynamic Properties and Control. Linköping University Electronic Press, Linköping (2016)

    Google Scholar 

  7. Sveshnikov, V.: Hydrodrives in modern mechanical engineering. Hydraul. Pneum. 28, 10–16 (2007)

    Google Scholar 

  8. Pavlenko, I., Simonovskiy, V., Demianenko, M.: Dynamic analysis of centrifugal machines rotors supported on ball bearings by combined application of 3D and beam finite element models. J. Phys. Conf. Ser.: Mater. Sci. Eng. 233, 012053 (2017)

    Google Scholar 

  9. Sokolov, V., Krol, O., Stepanova, O.: Choice of correcting link for electrohydraulic servo drive of technological equipment. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE 2019. LNME, pp. 702–710. Springer, Cham (2020)

    Google Scholar 

  10. Pavlenko, I., Trojanowska, J., Ivanov, V., Liaposhchenko, O.: Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. In: Machado, J., Soares, F., Veiga, G. (eds.) Innovation, Engineering and Entrepreneurship. HELIX 2018. LNEE, vol. 505, pp. 299–306 (2019)

    Google Scholar 

  11. Popov, D.: Dynamics and Regulation Hydro- and Pneumatic Systems. Machinery Engineering, Moscow (1987)

    Google Scholar 

  12. Sokolov, V.: Transfer functions for shearing stress in nonstationary fluid friction. In: Radionov, A., et al. (eds.) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. LNME, vol. 1, pp. 707–715. Springer, Cham (2020)

    Google Scholar 

  13. Rasskazova, Y., Stepanova, O., Azarenko, N.: Perfection of Electrohydraulic Drives of Machine-Building Equipment. VDEUNU, Severodonetsk (2016)

    Google Scholar 

  14. Krol, O., Sokolov, V.: Parametric modeling of gear cutting tools. In: Garpiński, B., Szostak, M., Ivanov, V. (eds.) Advances in Manufacturing II. Lecture Notes in Mechanical Engineering, vol. 4, pp. 3–11. Springer, Cham (2019)

    Chapter  Google Scholar 

  15. Kreynin, G., Krivts, I.: Hydraulic and Pneumatic Drives of Industrial Robots and Automatic Manipulators. Machinery Engineering, Moscow (1993)

    Google Scholar 

  16. Sveshnikov, V.: Hydrodrives of Tools. Machinery Engineering, Moscow (2008)

    Google Scholar 

  17. Popov, D.: Non-stationary Hydromechanical Processes. Machinery Engineering, Moscow (1982)

    Google Scholar 

  18. Pavlenko, I.: Static and dynamic analysis of the closing rotor balancing device of the multistage centrifugal pump. Appl. Mech. Mater. 630, 248–254 (2014)

    Article  Google Scholar 

  19. Abrahamova, T., Bushuyev, V., Gilova, L.: Metal-cutting Machine Tools. Machinery Engineering, Moscow (2012)

    Google Scholar 

  20. Kovalenko, A., et al.: Basics of Volume Hydraulic Drive of Building and Road Machines. DonSABA, Lugansk (1999)

    Google Scholar 

  21. Sokolov, V., Krol, O., Stepanova, O.: Nonlinear simulation of electrohydraulic drive for technological equipment. J. Phys: Conf. Ser. 1278, 012003 (2019)

    Google Scholar 

  22. Popov, D.: Mechanics of Hydro- and Pneumodrives. MSTU, Moscow (2005)

    Google Scholar 

  23. Rogovyi, A., Khovanskyy, A.: Application of the similarity theory for vortex chamber superchargers. J. Phys. Conf. Ser.: Mater. Sci. Eng. 233, 012011 (2017)

    Google Scholar 

  24. Rogovyi, A.: Energy performances of the vortex chamber supercharger. Energy 163, 52–60 (2018)

    Article  Google Scholar 

  25. Sokolov, V.: Diffusion of circular source in the channels of ventilation systems. In: Fujita, H., et al. (eds.) Advances in Engineering Research and Application. ICERA 2018. LNNS, vol. 63, pp. 278–283. Springer, Cham (2019)

    Google Scholar 

  26. Kim, D.: Theory of Automatic Control, vol. 1. Linear systems. Fizmathlit, Moscow (2003)

    Google Scholar 

  27. Pupkov, K., Egupov, N.: Methods of Classical and Modern Theory for Automation Control, vol. 3. Synthesis of Controllers for Automation Control Systems. MSTU, Moscow (2004)

    Google Scholar 

  28. Lurie, B., Enright, P.: Classical Automation Control Methods. BHV-Petersburg, Saint-Petersburg (2004)

    Google Scholar 

  29. Nuruzzaman, M.: Modeling and Simulating in Simulink for Engineers and Scientists. Author-House, Bloomington (2004)

    Google Scholar 

  30. Tewari, A.: Modern Control Design with MATLAB and Simulink. Wiley, Weinheim (2002)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Volodymyr Dahl East Ukrainian National University, 59-a, Pr. Central, Severodonetsk, 93400, Ukraine

    Volodymyr Sokolov, Olga Porkuian, Oleg Krol & Yevhen Baturin

Authors
  1. Volodymyr Sokolov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Olga Porkuian
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Oleg Krol
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yevhen Baturin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Volodymyr Sokolov .

Editor information

Editors and Affiliations

  1. Sumy State University, Sumy, Ukraine

    Vitalii Ivanov

  2. Poznan University of Technology, Poznan, Poland

    Justyna Trojanowska

  3. Sumy State University, Sumy, Ukraine

    Ivan Pavlenko

  4. Technical University of Kosice, Presov, Slovakia

    Jozef Zajac

  5. University of Zagreb, Zagreb, Croatia

    Dragan Peraković

Rights and permissions

Reprints and permissions

Copyright information

© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Sokolov, V., Porkuian, O., Krol, O., Baturin, Y. (2020). Design Calculation of Electrohydraulic Servo Drive for Technological Equipment. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-50794-7_8

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-50794-7_8

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-50793-0

  • Online ISBN: 978-3-030-50794-7

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation