Abstract
The studies presented in the article are aimed at developing the basics of ensuring the creation of CAD systems for disk run-in milling cutters for machining multitooth products regardless of profile. The development of this tool is based on its design methodology, which is based on the theory of shaping and design of cutting tools. Based on the analysis of the methods of processing multitooth products, the prospects of processing multitooth products with round disc milling cutters are substantiated. In this work, the problem of determining the cutting edges with the perpendicular and inclined axes of the tool and product is solved. The smallest design diameter of a disk run-in mill is determined. The design of the run-in mills, which provides the manufacture of chip grooves between the teeth of the product, is considered. The development of the design of the disk run-in mills included determining the diameter, taking into account regrinding. The geometric parameters of cutters are established. Based on the developed methodology for creating a CAD system for disk rolling mills, an automated system for designing disk rolling mills has been created. The operation study of milling cutters designed using this system confirmed the high accuracy of the products and prospects of their application. It is shown that the development of CAD systems for such mills significantly reduces the design and technological preparation of the production of multitooth products by disk rolling mills.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sakharov, G.: Break-in tools. Engineering, Moscow (1983). [in Russian]
Stupnitsky, V., Gritsay, I., Slipchuk, A.: Possession and progressive methods of forming details. Navalny pos_bnik, Lviv Polytechnic, Lviv (2012). [in Russian]
Shepeleva, G.: Theory of shaping and contact of moving bodies. Stankin, Moscow (1999). [in Russian]
Chryssolouris, G.: Laser Machining Theory and Practice. Springer, New York (2013)
Nee, J.G.: Fundamentals of Tool Design. Society of Manufacturing Engineers Dearborn, Michigan (2010)
http://www.ctmag.com/news/articles/fundamentals_industrial-sawing. Accessed 06 Sept 2018
Stephenson, D., Agapiou, J.: Metal Cutting Theory and Practice. CRC Press, United States (2016)
Rodin, P.: Fundamentals of surface shaping by cutting. High school, Head Publishing House, Kyiv (1977). [in Russian]
Rodin, P., Odintsova, A.: Disc shaped cutters for cutting ratchet wheels by rolling. In: Topical problems in the field of mechanical engineering, radio electronics, automation and computer engineering, thermal power engineering and industrial technology, Kiev. pp. 7–8 (1988). [in Russian]
Ravska, N., Parnenko, V., Rodin, R.: Cutting method of circular saws with variable pitch. Patent for cinnamon, model UA 104229, Publish 25 January 2016 (2016). [in Ukrainian]
Parnenko, V.: Calculation of the parameters for disc saws that use method of running for toolmaking with uneven tooth pitch. Bull. Nat. Tech. Univ. Ukraine “KPI” 72, 152–156 (2014). [in Russian]
http://metalurg.su/preimushhestva-i-nedostatki-plazmennoj-rezki.html. Accessed 18 Jan 2018
Ravska, N., Rodin, P., Nikolaenko, T., Melnichuk, P.: The basics of shaping on top with mechanical testing. View SKD-Druk, Kyiv (2013). [in Ukrainian]
Ravskaya, N., Lorokh, R.: The law of motion of the grinding wheel when machining the teeth of cutting saws. Sat. Cutting tools Technol. Syst. 51, 84–87 (1997). [in Russian]
Odintsova, A., Malamed, E.: Permanent milling cutter for ratchet wheel processing. Technol. Organ. Prod. 4, 28–30 (1984). [in Russian]
Pankratov, Yu.: Profiling Rolling Tools. Polytechnic Service, St. Petersburg (2010)
Rodin, P., Odintsova, A.: Profile of a mill of a permanent installation for machining gear products on gear hobbing machines. Cutting Tool 33, 62–64 (1985). [in Russian]
Rodin, P., Odintsova, A., Olifirenko, M.: The method of cutting ratchet wheels and a circular angle mill for its implementation. C.A. No. 1373501, no. 6 (1988). [in Russian]
Salenko, O., Zagirnyak, M., Fomovska, O., Dotsenko, V., Schetinin, V.: Processes and possession of a laser cutting. Monograph, Kharkov - Madrid (2013). [in Russian]
Golovko, L., Luk’yanenko, S.: Laser technology and computer modeling. Vistka, Kyiv (2009). [in Russian]
Grechishnikov, V., Kirsanov, G.: Automated design of metal cutting tools. Mosstankin, Moscow (1984). [in Russian]
Petukhov, A.: Systems of computer-aided design of technological processes. Tutorial. Gomel state technical University of P.O. Sukhoi, Belarus (2011). [in Russian]
Tandon, P.: Cutting Tool Geometry: 3D Perspective: Computer Aided Geometric Design of Cutting Tools. LAP LAMBERT Academic Publishing, Latvia (2011). [in Russian]
Srinivas, J.: CAD/CAM: Principles and Applications. Oxford University Press, United Kingdom (2016)
Ravska, N.S.: Research of the multi-tooth instruments for Recreation 3D Projects. Herald of the DSEA 2(33), 54–59 (2014). [in Ukrainian]
Vikram, S.: Fundamentals Of Computer Aided Manufacturing. S.k. Kataria & Sons, Delhi (2011)
Lechovitser, V., Balushok, K., Lipsky, E.: Development of the specialized system “Toothpicking”. Technol. Syst. 3(5), 74–77 (2000). [in Russian]
Pankratov, Yu.: CAD cutting tools. Lan, Moscow (2013). [in Russian]
Ravska, N.: Fundamentals of kinematic theory of geometrical parameters in the part of the instrument. Reliab. Tools Optim. Technol. Syst. 24, 9–18 (2009). [in Russian]
Zibirov, V.: Visual Basic 2010 with examples. BHV-Petersburg, Petersburg (2010). [in Russian]
Alyamovsky, A.: SolidWorks Simulation. Engineering analysis for professionals: tasks, methods, recommendations. DMK Press, Moscow (2015). [in Russian]
Alyamovsky, A.: SolidWorks Simulation. How to solve practical problems. BHV-Petersburg, Petersburg (2012). [in Russian]
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Ravska, N., Klochko, A., Ivanovskiy, O., Vovk, V., Parnenko, V. (2020). Fundamentals of CAD Design of Rotary Milling Cutters for Multitooth Products. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-50794-7_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-50794-7_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-50793-0
Online ISBN: 978-3-030-50794-7
eBook Packages: EngineeringEngineering (R0)