Abstract
As discussed in Sect. 2.4, the definitions of the twist and wrench describe the instantaneous velocity (infinitesimal displacement) of a rigid body and the external load applied at it in the framework of screw theory. Also, an example is given to demonstrate their application in describing the degrees of freedom and constraints of a compliant parallel mechanism in Sect. 2.4.3. Further screw theory is utilized to systematically design compliant mechanisms based on the mechanism-equivalence principle. According to this principle, the design of a compliant mechanism can be categorized into two steps: the design of flexible elements and the integration of them. We begin with flexible elements in this chapter and explore their performance both qualitatively and quantitatively through their internal compliance/stiffness. Particularly, flexible elements are categorized according to their feasible degrees of freedom (DOF). Single DOF flexible elements are examined first in Sect. 3.2, followed by multiple DOF flexible elements in Sect. 3.3.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Huang, S., Schimmels, J.M.: The bounds and realization of spatial stiffnesses achieved with simple springs connected in parallel. IEEE Trans. Robot. Autom. 14(3), 466–475 (1998)
Shigley, J.E., Mischke, C.R., Budynas, R.G., Liu, X., Gao, Z.: Mechanical Engineering Design, vol. 89. McGraw-Hill, New York (1989)
Parise, J.J., Howell, L.L., Magleby, S.P.: Ortho-planar linear-motion springs. Mech. Mach. Theory 36(11), 1281–1299 (2001)
Awtar, S., Slocum, A.H.: Constraint-based design of parallel kinematic XY flexure mechanisms. J. Mech. Des. 129(8), 816–830 (2007)
Blanding, D.L.: Exact constraint: machine design using kinematic processing. American Society of Mechanical Engineers (1999)
Pashkevich, A., Chablat, D., Wenger, P.: Stiffness analysis of overconstrained parallel manipulators. Mech. Mach. Theory 44(5), 966–982 (2009)
Pashkevich, A., Klimchik, A., Chablat, D.: Enhanced stiffness modeling of manipulators with passive joints. Mech. Mach. Theory 46(5), 662–679 (2011)
Duffy, J.: Statics and Kinematics with Applications to Robotics. Cambridge University Press (1996)
Hale, L.C.: Principles and techniques for designing precision machines. Technical Report, Lawrence Livermore National Lab., CA, US (1999)
Tuma, J.J.: Handbook of Structural and Mechanical Matrices. McGraw-Hill Inc., New York, NY, USA (1987)
Ciblak, N., Lipkin, H.: Design and analysis of remote center of compliance structures. J. Robot. Syst. 20(8), 415–427 (2003)
Young, W.C., Budynas, R.G.: Roark’s Formulas for Stress and Strain, vol. 6. McGraw-Hill, New York (2002)
Howell, L.L., Magleby, S.P., Olsen, B.M., Wiley, J.: Handbook of Compliant Mechanisms. Wiley Online Library (2013)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Qiu, C., Dai, J.S. (2021). Screw Representation of Flexible Elements. In: Analysis and Synthesis of Compliant Parallel Mechanisms—Screw Theory Approach. Springer Tracts in Advanced Robotics, vol 139. Springer, Cham. https://doi.org/10.1007/978-3-030-48313-5_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-48313-5_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-48312-8
Online ISBN: 978-3-030-48313-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)