Abstract
Six sigma has been used in different industries to reach operational excellence. However, in the chemical industry, the application of this methodology is limited. This research presents an implementation of the six sigma method for ammonium nitrate (AN) content optimization in condensate production for a fertilizer company in Colombia. The paper aims to determine the levels for input variables in the process, to meet desirable standards for condensate quality in terms of ammonium nitrate content. Based on the DMAIC steps implementation, it was possible to establish the main variables affecting the condensate quality and their optimal levels to reach an ammonium nitrate content below 15,000 ppm. These results demonstrate the impact that a six sigma project may have on operational effectiveness and quality improvement for meeting the customer requirements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Baýa, A.P.: Achieving customer specifications through process improvement using six sigma: case study of NutriSoil – Portugal. Qual. Manag. J. 22, 48–60 (2015). https://doi.org/10.1080/10686967.2015.11918428
Bunce, M.M., Wang, L., Bidanda, B.: Leveraging six sigma with industrial engineering tools in crateless retort production. Int. J. Prod. Res. 46, 6701–6719 (2008). https://doi.org/10.1080/00207540802230520
Ortiz Barrios, M., Felizzola Jiménez, H.: Reduction of average lead time in outpatient service of obstetrics through six sigma methodology. In: Bravo, J., Hervás, R., Villarreal, V. (eds.) AmIHEALTH 2015. LNCS, vol. 9456, pp. 293–302. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-26508-7_29
Kim, Y., Han, S.H.: Implementing lean six sigma: a case study in concrete panel production. In: 20th Annual Conference of the International Group for Lean Construction (2012)
Patel, M., Desai, D.: Critical review and analysis of measuring the success of Six Sigma implementation in manufacturing sector. Int. J. Qual. Reliab. Manag. 35(8), 1519–1545 (2018). https://doi.org/10.1108/IJQRM-04-2017-0081
Sreedharan, V.R., Raju, R.: A systematic literature review of lean six sigma in different industries. Int. J. Lean Six Sigma. 7, 430–466 (2016). https://doi.org/10.1108/IJLSS-12-2015-0050
Abbasfard, H., Rafsanjani, H.H., Ghader, S., Ghanbari, M.: Mathematical modeling and simulation of an industrial rotary dryer: a case study of ammonium nitrate plant. Powder Technol. 239, 499–505 (2013). https://doi.org/10.1016/j.powtec.2013.02.037
Johannsen, F., Leist, S., Zellner, G.: Implementing six sigma for improving business processes at an automotive bank. In: vom Brocke, J., Rosemann, M. (eds.) Handbook on Business Process Management 1. IHIS, pp. 393–416. Springer, Heidelberg (2015). https://doi.org/10.1007/978-3-642-45100-3_17
Nabhani, F., Shokri, A.: Reducing the delivery lead time in a food distribution SME through the implementation of six sigma methodology. J. Manuf. 20, 957–974 (2010). https://doi.org/10.1108/17410380910984221
Boltić, Z., Jovanović, M., Petrović, S., Božanić, V., Mihajlović, M.: Continuous improvement concepts as a link between quality assurance and implementation of cleaner production - case study in the generic pharmaceutical industry. Chem. Ind. Chem. Eng. Q. 22, 55–64 (2016). https://doi.org/10.2298/CICEQ150430019B
Garland, R.W.: Six sigma project to improve a management of change process. AIChE (2010). https://doi.org/10.1002/prs.10402
Harold, M.P., Ogunnaike, B.A.: Process engineering in the evolving chemical industry. AIChE J. 46, 2123–2127 (2000). https://doi.org/10.1002/aic.690461105
Buss, P., Ivery, N.: Dow Chemical design for six sigma rail delivery project. In: Proceedings of the 2001 Winter Simulation Conference, pp. 226–232 (2001)
Arone, A., Pariona, M., Hurtado, Á., Chichizola, V., Alvarez, J.C.: Improvement of chemical processes for the analysis of mineral concentrates using lean six sigma. In: Iano, Y., Arthur, R., Saotome, O., Vieira Estrela, V., Loschi, H.J. (eds.) BTSym 2018. SIST, vol. 140, pp. 533–540. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-16053-1_52
Dönmez, C.Ç., Yakar, B.: A systematic perspective on supply chain improvement by using lean six sigma and an implementation at a fertilizer company. Electron. J. Soc. Sci. 18, 1377–1396 (2019). https://doi.org/10.17755/esosder.513530
Wegner, K.A.: Process improvement for regulatory analyses of custom-blend fertilizers. J. AOAC Int. 97, 759–763 (2014). https://doi.org/10.5740/jaoacint.13-401
Desyane, H.K., Fantinus, A.W.: Proposed quality improvement of liquid organic fertilitizers “Herbafarm” to meet national standards in Indonesia. Indones. J. Bus. Adm. 1, 343–352 (2012)
Statgraphics Technologies Inc.: Statgraphics Centurion XVIII (2019). https://www.statgraphics.com/
Romero-Conrado, A.R., Suárez-Agudelo, E.A., Macías-Jiménez, M.A., Gómez-Charris, Y., Lozano-Ayarza, L.P.: Diseño experimental para la obtención de compost apto para uso agrícola a partir de lodo papelero Kraft. Rev. Espac. 38, 1–14 (2017)
Kwak, Y.H., Anbari, F.T.: Benefits, obstacles, and future of six sigma approach. Technovation 26, 708–715 (2006). https://doi.org/10.1016/j.technovation.2004.10.003
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Ochoa-González, O., Coronado-Hernández, J.R., Macías-Jiménez, M.A., Romero-Conrado, A.R. (2020). Quality Improvement in Ammonium Nitrate Production Using Six Sigma Methodology. In: Saeed, K., Dvorský, J. (eds) Computer Information Systems and Industrial Management. CISIM 2020. Lecture Notes in Computer Science(), vol 12133. Springer, Cham. https://doi.org/10.1007/978-3-030-47679-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-47679-3_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-47678-6
Online ISBN: 978-3-030-47679-3
eBook Packages: Computer ScienceComputer Science (R0)