Abstract
Polymer composites are composite materials with matrices of polymers with reinforcements using fibers or particles or both together. This study uses polypropylene polymer composite material with reinforcement of bottom ash particles. In the manufacture of polypropylene-shaped sheet (lamina) polymer composite materials with bottom ash particles, the process of assessing the composite characteristics of the polypropylene matrix such as the level of distribution of bottom ash particles as fillers in the polypropylene matrix through microscopic images is necessary. Analysis of the level of distribution of reinforcement particle is used to avoid the formation of filler particle agglomerates during the dispersion of various types of fillers in polymer resins. Bottom ash particles themselves have an irregular shape that requires particular analysis to distinguish a single particle and an agglomerate particle. Before the analysis step, the most crucial step at the beginning is to carry out the process of improving the quality of the input image, which aims to improve image contrast and eliminate unwanted noise. This chapter proposes an image enhancement method to enhance the quality of the microstructure image of a polymer composite that is analyzed using a digital microscope. The proposed method combines the multiresolution approach and the anisotropic diffusion method. From the experiment, this image enhancement method gives the best performance when it is compared with other techniques in the state of the arts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
T. Glaskova, M. Zarrelli, A. Borisova, K. Timchenko, A. Aniskevich, M. Giordano, Compos. Sci. Technol. 71, 1543 (2011)
T. Glaskova, M. Zarrelli, A. Aniskevich, M. Giordano, L. Trinkler, B. Berzina, Compos. Sci. Technol. 72, 477 (2012)
F.A. Hermawati, Sugiono, Evonda, in Advanced Materials Techniques, Physics, Mechanics and Applications, ed by I.A. Parinov, S.-H. Chang, M.A. Jani, Springer International Publishing, Berlin, pp. 535–543 (2017)
A. Campbell, P. Murray, E. Yakushina, S. Marshall, W. Ion, Mater. Des. 141, 395 (2018)
S. Kundu, P. Jana, D. De, M. Roy, in Proceedings of 2015 IEEE International Conference on Electrical, Computer and Communication Technologies, ICECCT 2015 (2015)
P.S. Hiremath, A. Sadashivappa, P. Pattan, Int. J. Comput. Appl. 107, 975 (2014)
P.S. Hiremath, A. Sadashivappa, Int. J. Image Process. 7, 101 (2013)
J. Martin-herrero, C. Germain, Carbon, Elsevier, vol. 45, pp. 1242 (2007)
P. Perona, J. Malik, IEEE Trans. Pattern Anal. Mach. Intell. 12, 629 (1990)
L. Duval, M. Moreaud, C. Couprie, D. Jeulin, H. Talbot, J. Angulo, in 2014 IEEE International Conference on Image Processing, ICIP 2014, pp. 4862 (2014)
F.A. Hermawati, H. Tjandrasa, N. Suciati, Int. J. Electr. Comput. Eng. (IJECE) 8, 1747 (2018)
L. Duval, M. Moreaud, C. Couprie, D. Jeulin, H. Talbot, J. Angulo, in 2014 IEEE International Conference on Image Processing, ICIP 2014, pp. 4862–4866 (2014)
X. Fu, Y. Wang, L. Chen, J. Tian, Biomed. Signal Process. Control 18, 30 (2015)
Y.M.M. Babu, M.V. Subramanyam, M.N.G. Prasad, Int. J. Electr. Comput. Eng. 5, 984 (2015)
F. A. Hermawati, S. Sugiono, R. Octaviany, in Seminar Nasional Otomasi Industri Dan Teknologi Informasi 2015 (SNOITI 2015) (2015) (in Indonesian)
Acknowledgements
This research was funded from a leading applied research universities from The Ministry of Research, Technology & Higher Education of the Republic of Indonesia based on Grant No. 229/SP2H/LT/DRPM/2019 dated March 11, 2019 and contract number: 374/06/ST/LPPM/Lit/III/2019.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Hermawati, F.A., Kastiawan, I.M., Muhyin (2020). Digital Microscopy Image Enhancement Technique for Microstructure Image Analysis of Bottom Ash Particle Polymer Composites. In: Parinov, I., Chang, SH., Long, B. (eds) Advanced Materials. Springer Proceedings in Materials, vol 6. Springer, Cham. https://doi.org/10.1007/978-3-030-45120-2_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-45120-2_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-45119-6
Online ISBN: 978-3-030-45120-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)