Abstract
Drying fissures occur in some timber structures what can lead to an issue for a mechanical resistance of these structures. There is no proposal to quantify the effect of various fissures and gaps on the charring of timber structural members. Therefore, this contribution deals with the numerical and experimental analysis of selected dimensions and number of fissures. The numerical analysis was conducted in a software based on FEM. There were created models with local fissures and simplified “smeared” models. The samples were tested in a cone calorimeter. There were two types of samples. The charring depth was measured from a split cross-section for the first group of samples. Temperatures were measured by means of thermocouples for the second group of samples and the charring depth was calculated based on these temperatures. The aim of this paper is to compare values of the charring rate and depth for the samples with different fissures. In terms of results, the bigger fissures or larger quantity of fissures should be considered by means of advanced design methods, or by increased value of the charring rate. However, the smaller fissures can be neglected.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
STN EN 1995-1-2: Eurocode 5: design of timber structures - part 1-2: general - structural fire design (2008)
Beilicke G et al (2009) Holz brandschutz handbuch, 3rd edn. Ernst & Sohn, Berlin
Mergny E et al (2016) Influence of cracks on the stiffness of timber structural elements. In: Worl conference on timber engineering, WCTE 2016, Vienna
Fornather J et al (2001) Versuchsbericht – Kleinbrandversuchsreihe 2 Teil 1 (KBV 2/1) – Versuche mit Rissen. Universität für Bodenkultur, Institut für konstruktiven Ingenieurbau, Vienna
Fornather J et al (2004) Brennbarkeit und Brandverhalten von Holz, Holzwerkstoffen und Holzkonstruktionen: Zusammenfassung und Erkenntnisse für die Bemessungspraxis; ein Forschungsprojekt des Fachverbandes der Holzindustrie Österreichs. 2. Aufl. proHolz Austria, Wien. ISBN 3902320036
Frangi A et al (2010) Fire safety in timber buildings: technical guideline for Europe. http://eurocodes.jrc.ec.europa.eu/doc/Fire_Timber_Ch_5-7.pdf
Xu Q, Chen L et al (2015) Combustion and charring properties of five common constructional wood species from cone calorimeter tests. Constr Build Mater 96:416–427. https://doi.org/10.1016/j.conbuildmat.2015.08.062
Tsantaridis LD, Östman BAL (1998) Charring of protected wood studs. Fire Mater https://onlinelibrary.wiley.com/doi/full/10.1002/%28SICI%291099-1018%28199803/04%2922%3A2%3C55%3A%3AAID-FAM635%3E3.0.CO%3B2-T
ISO 5660-1:2015 - Reaction-to-fire tests, heat release, smoke production and mass loss rate, part 1: heat release rate (cone calorimeter method) (2015)
Rantuch P et al (2015) The influence of heat flux density on the thermal decomposition of OSB. Acta Fac Xylologiae 57(2):125–134. https://www.researchgate.net/publication/283677358_The_influence_of_heat_flux_density_on_the_thermal_decomposition_of_OSB
Janssens M (1991) Piloted ignition of wood: a review. Fire Mater 15(4):151–167
Delichatsios MA (2000) Ignition times for thermally thick and intermediate conditions in flat and cylindrical geometries. Fire Saf Sci 6:233–244
Property tables and charts (SI units), [without date]. https://www.researchgate.net/file.PostFileLoader.html?id=54c8f917cf57d749248b4689&assetKey=AS%3A273740741447683%401442276287686
Erchinger CD (2009) Zum Verhalten von mehrschnittigen Stahl-Holz-Stabdübelverbindungen im Brandfall, Zürich, Ph.D. thesis, Institut für Baustatik und Konstruktion Eidgenössische Technische Hochschule Zürich. http://e-collection.library.ethz.ch/eserv/eth:2352/eth-2352-01.pdf
Kamenická Z (2018) Selected problems in determining the fire resistance of timber structural members. Ph.D. thesis. Slovak University of Technology in Bratislava, Bratislava Supervisor J. Sandanus
Acknowledgement
This paper has been supported by the Scientific Grant Agency of the Ministry of Education, science, research and sport of the Slovak Republic and the Slovak Academy of Sciences – grant VEGA 1/0773/18.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Sandanus, J., Kamenická, Z., Rantuch, P., Martinka, J., Balog, K. (2020). Charring of Timber with Fissures in Experimental and Numerical Simulations. In: Makovicka Osvaldova, L., Markert, F., Zelinka, S. (eds) Wood & Fire Safety. WFS 2020. Springer, Cham. https://doi.org/10.1007/978-3-030-41235-7_24
Download citation
DOI: https://doi.org/10.1007/978-3-030-41235-7_24
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41234-0
Online ISBN: 978-3-030-41235-7
eBook Packages: EngineeringEngineering (R0)