Abstract
In this chapter, the basic concepts on the calculation of the scuffing load carrying capacity of cylindrical, bevel and hypoid gears are discussed, but according to the integral temperature method . For all these gears, the fundamentals of Blok’s theory are then converted in terms of integral temperature , which mainly depends on the weighted average of the local values of the flash temperature distribution along the path of contact . All influence parameters are reconsidered in terms of integral temperature instead of flash temperature , including the mean coefficient of friction . The permissible integral temperature is then determined and compared with the scuffing integral temperature in order to define the corresponding scuffing safety factor . A large part of the chapter is reserved for the procedures to calculate the scuffing load carrying capacity of the aforementioned types of gears in accordance with the ISO standards , highlighting when deemed necessary as the relationships used by the same ISO are founded on the related theoretical bases. Finally, a question is asked about the use of flash temperature method or integral temperature method for assesment of the scuffing load carrying capacity of the gears.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Grekoussis R, Michailidis Th (1981) Näherungsgleichungen zur Nach- und Entwurfsrechnung der Punktberührung nach Herts. Konstruktion 33
Henriot G (1979) Traité théorique et pratique des engrenages, vol 1, 6th edn. Bordas, Paris
Ishikawa J, Hayashi K, Yokoyama M (1972) Surface temperature and scoring resistance of heavy-duty gears. Institute of Technology, Tokio
ISO 10300-1:2014 Calculation of load capacity of bevel gears—part 1: introduction and general influence factors
ISO 53:1998 Cylindrical gears for general and heavy engineering—standard basic rack tooth profile
ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears—part 1: flash temperature method
ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears—part 2: integral temperature method
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears—part 20: calculation of scuffing load capacity (also applicable to bevel and hypoid gears)—flash temperature method
ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears—part 21: calculation of scuffing load capacity (also applicable to bevel and hypoid gears)—integral temperature method
Juvinall RC (1967) Engineering considerations of stresses, strain, and strength. McGraw-Hill Book Company, New York
Lechner G (1966) Die Freβ-Grenzlast bei Stirnrädern aus Stahl, Dissertation TH München
Michaelis K (1987) Die Integraltemperatur zur Beurteilung der Freßtragfähigkeit von Stirnradgetrieben, Diss. TU München
Niemann G, Winter H (1983) Maschinen-Elemente, Band III: Schraubrad-, Kegelrad-, Schnecken-, Ketten-, Rienem-, Reibradgetriebe, Kupplungen, Bremsen, Freiläufe. Springer, Berlin
Polder JW (1982) Contribution to a Uniform ISO Scuffing Criterion, ISO/Technical Committee 60/Working-Group 6, Document 280, May
Polder JW (1986) Influence of geometrical parameters on the gear scuffing criterion. In: Proceedings of the 2nd World Congress on Gearing, March pp 3–5, Paris, France
Polder JW (1987a) Influence of geometrical parameters on the gear scuffing criterion—part I, Gear Technology, March/April pp 28–34
Polder JW (1987b) Influence of geometrical parameters on the gear scuffing criterion—part II, Gear Technology, May/June pp 19-27
Timoshenko S, Goodier JN (1951) Theory of elasticity. McGraw-Hill Book Company Inc., New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Vullo, V. (2020). Scuffing Load Carrying Capacity of Cylindrical, Bevel and Hypoid Gears: Integral Temperature Method. In: Gears. Springer Series in Solid and Structural Mechanics, vol 11. Springer, Cham. https://doi.org/10.1007/978-3-030-38632-0_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-38632-0_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-38631-3
Online ISBN: 978-3-030-38632-0
eBook Packages: EngineeringEngineering (R0)