Abstract
Wood and wood based products application in the construction is growing due to the increasing trend of sustainable development. Because of the EU policy about constructions, each time requiring improved products against fire hazard, there is a need of developing fireproof products to wood and wood based panels and know their life time behavior.
To evaluate the performance and durability of fire retarded wood based panels, concerning mechanical and reaction to fire behavior, an experimental study is done considering the long term behavior of wood based panels with and without fire retardant products after being submitted to accelerated aging and compared to non-aged wood based panels. Fire reaction was carried out through cone calorimeter tests to evaluate if the fire reaction properties were maintained or altered after exposure to environmental conditions.
In terms of mechanical properties, MDF and PB panels had significant losses in MOR and MOE values after being submitted to aging. This behavior is not so clear for OSB panels. Reduction in mechanical properties are smaller for MDF panels with flame retardant when compared to MDF without flame retardant whereas PB without flame retardant showed small losses compared to PB with flame retardant. MDF panels without flame retardant presented a decrease in the fire reaction properties, releasing more heat after aging, whereas in the PB and OSB without flame retardant properties were maintained. MDF and PB fire retardant panels reaction to fire behavior before and after aging allows to maintain them in class B of fire reaction.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
European Commission, A Roadmap for moving to a competitive low carbon economy in 2050. European Commission: Brussels (2011)
JOUE, EU Construction Products Regulation (No. 305/2011) E. Parliament, Editor. Official Journal of the European Union (2011)
Lee, B.-H., et al.: Evaluating the flammability of wood-based panels and gypsum particleboard using a cone calorimeter. Constr. Build. Mater. 25(7), 3044–3050 (2011)
Ramage, M.H., et al.: The wood from the trees: the use of timber in construction. Renew. Sustain. Energy Rev. 68, Part 1, 333–359 (2017)
Esteves, B.M., Pereira, H.M.: Wood modification by heat treatment: a review. BioResources 4(1), 370–404 (2009)
CEN, EN 13501-1: Fire classification of construction products and building elements: part 1 classification using test data from reaction to fire tests. European Committee for Standardization: Brussels, Belgium, p. 41 (2002)
Östman, B., Mikkola, E.: European classes for the reaction to fire performance of wood products. Holz als Roh- und Werkstoff 64(4), 327–337 (2006)
Luo, J.: Ignition properties of panels coated with finishing fire-retardant paints under external radiation. Procedia Eng. 135, 123–127 (2016)
Harada, T.: Time to ignition, heat release rate and fire endurance time of wood in cone calorimeter test. Fire Mater. 25(4), 161–167 (2001)
Daniliuc, A., et al.: New trends in wood coatings and fire retardants: biobased monomers and high performance coatings. European Coatings Journal (2012)
CEN, EN1995-1-2 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design. European Committee for Standardization: Brussels, Belgium (2004)
CEN, EN 16755: Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications. European Committee For Standardization: Brussels (2017)
Östman, B., et al.: Durability of fire retardant treated wood products at humid and exterior conditions review of literature. Fire Mater. 25(3), 95–104 (2001)
Östman, B.A.L., Tsantaridis, L.D.: Durability of the reaction to fire performance of fire-retardant-treated wood products in exterior applications – a 10-year report. Int. Wood Prod. J. 8(2), 94–100 (2017)
NORDTEST, NORDTEST NT Fire 054, Durability of reaction to fire – Performance classes of fire-retardant treated wood-based products in interior and exterior end use applications. Nordic Innovation Centre (2006)
CEN, EN310 Determination of modulus of elasticity in bending and of bending strength 1993, European Committee for Standardization
SonaeArauco, Construction and furniture products: technical data. www.sonaearauco.com
Torquato, L.: Caracterização dos painéis MDF comerciais produzidos no brasil, in Engenharia Florestal, Setor de Ciências Agrárias. Universidade Federal do Paraná (2008)
Del Menezzi, C.: Estabilização dimensional por meio do tratamento térmico e seus efeitos sobre as propriedades de painéis de partículas orientadas (OSB). Universidade Federal do Paraná (2013)
Acknowledgments
The authors acknowledge the support given by the company Sonae Arauco for providing the wood based panels.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Mesquita, L., Ferle, L., Santos, G. (2020). Durability of Reaction to Fire Performance of Wood Based Panels Through Accelerated Aging Cycles. In: Piloto, P., Rodrigues, J., Silva, V. (eds) Advances in Fire Safety Engineering. CILASCI 2019. Lecture Notes in Civil Engineering, vol 1. Springer, Cham. https://doi.org/10.1007/978-3-030-36240-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-36240-9_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-36239-3
Online ISBN: 978-3-030-36240-9
eBook Packages: EngineeringEngineering (R0)