Abstract
The measurement of cable extension is a complex problem needing special mechanical tests and modern measurement means, particularly important for the safe functioning of some installations in which human values and special materials are involved. The mechanical tests on cables usually refer to their modulus of elasticity and breaking limit establishing. At the Laboratory for Research and Testing of Materials from the Polytechnic Institute of Bucharest an experimental rig has been set up permitting the automatic plotting of force versus deformation curves for conductors loaded in tension. Tests are performed on a Werder-type universal testing machine of 1 MN, with horizontal axis, modernized by addition of a hydraulic drive and a chain for the measurement and simultaneous recording of forces and displacements. Another example is the automatic measurement system for ground anchor proof testing in Portugal.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ştefănescu, D.M.: Contributions to the modernization of the materials testing machines (in Romanian). Construcţia de Maşini, Bucureşti. 53(1), 54–59 (2001). ISSN 0573-7419
Ştefănescu, D.M., Găvan, M., Păvălucă, C.: Prüfanlage für die Bestimmung der mechanischen Eigenschaften der Freileitungsseilen. Rev. Roum. Sci. Techn. Série de Mécanique Appliquée. 32(6), 671–674 (1987)
Ştefănescu, D.M., Ştefănescu, V., Mănescu, T.: Strain gauge force transducers for dynamic measurements in energetics. In: Proceedings of the XIII IMEKO World Congress, Vol. 3, pp. 2568–2573, Turin, Italy, 5–9 Sept 1994
Morais, P.G., Santos, C.A, de Carvalho, M.R.: Automatic measurement system for ground anchor proof testing. In: CD Proceedings of the XVIII IMEKO World Congress on Metrology for a Sustainable Development, Paper 507, Rio de Janeiro, Brazil, 17–22 Sept 2006
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ştefănescu, D.M. (2020). Methods and Means for Measuring Cables Tension. In: Handbook of Force Transducers. Springer, Cham. https://doi.org/10.1007/978-3-030-35322-3_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-35322-3_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-35321-6
Online ISBN: 978-3-030-35322-3
eBook Packages: EngineeringEngineering (R0)