Abstract
The paper discusses newexperiments to study the effect of non-proportional loading paths on damage and fracture behavior of ductile metals. Specimens are taken from thin metal sheets and are tested under different biaxial loading conditions covering a wide range of stress states. In this context, a thermodynamically consistent anisotropic continuum damage model is presented based on yield and damage conditions as well as evolution laws for plastic and damage strain rates. To validate the constitutive laws and to identify material parameters different experiments with the biaxially loaded X0-specimen have been performed. Results for proportional and corresponding non-proportional loading histories are discussed. During the experiments strain fields in critical regions of the specimens are analyzed by digital image correlation (DIC) technique while the fracture surfaces are examined by scanning electron microscopy (SEM). The results elucidate the effect of loading history on damage and fracture behavior in ductile metals.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bai Y, Wierzbicki T (2008) A new model of metal plasticity and fracture with pressure and Lode dependence. International Journal of Plasticity 24(6):1071 – 1096, https://doi.org/10.1016/j.ijplas.2007.09.004
Bao Y, Wierzbicki T (2004) On fracture locus in the equivalent strain and stress triaxiality space. International Journal of Mechanical Sciences 46(1):81 – 98, https://doi.org/10.1016/j.ijmecsci.2004.02.006
Basu S, Benzerga A (2015) On the path-dependence of the fracture locus in ductile materials - experiments. International Journal of Plasticity 71:79–90
Benzerga AA, Surovik D, Keralavarma SM (2012) On the path-dependence of the fracture locus in ductile materials – analysis. International Journal of Plasticity 37:157 – 170
Bonora N, Gentile D, Pirondi A, Newaz G (2005) Ductile damage evolution under triaxial state of stress: theory and experiments. International Journal of Plasticity 21(5):981 – 1007, https://doi.org/10.1016/j.ijplas.2004.06.003
Brünig M, Gerke S, Schmidt M (2016) Biaxial experiments and phenomenological modeling of stress-state-dependent ductile damage and fracture. International Journal of Fracture 200:63–76
Brünig M (2003) An anisotropic ductile damage model based on irreversible thermodynamics. International Journal of Plasticity 19(10):1679 – 1713
Brünig M (2016) A thermodynamically consistent continuum damage model taking into account the ideas of CL Chow. International Journal of Damage Mechanics 25(8):1130–1141, https://doi.org/10.1177/1056789516639119
Brünig M, Chyra O, Albrecht D, Driemeier L, AlvesM(2008) A ductile damage criterion at various stress triaxialities. International Journal of Plasticity 24(10):1731 – 1755, https://doi.org/10.1016/j.ijplas.2007.12.001, special Issue in Honor of Jean-Louis Chaboche
Brünig M, Gerke S, Hagenbrock V (2013) Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage. International Journal of Plasticity 50:49 – 65, https://doi.org/10.1016/j.ijplas.2013.03.012
Brünig M, Brenner D, Gerke S (2015a) Modeling of stress-state-dependent damage and failure of ductile metals. Applied Mechanics and Materials 784:35–42
Brünig M, Brenner D, Gerke S (2015b) Stress state dependence of ductile damage and fracture behavior: Experiments and numerical simulations. Engineering Fracture Mechanics 141:152 – 169
Brünig M, Gerke S, Schmidt M (2018) Damage and failure at negative stress triaxialities: Experiments, modeling and numerical simulations. International Journal of Plasticity 102:70 – 82, https://doi.org/10.1016/j.ijplas.2017.12.003
Chow CL, Lu TJ (1992) An analytical and experimental study of mixed-mode ductile fracture under nonproportional loading. International Journal of Damage Mechanics 1(2):191–236, https://doi.org/10.1177/105678959200100203
Chow CL, Wang J (1987) An anisotropic theory of continuum damage mechanics for ductile fracture. Engineering Fracture Mechanics 27(5):547 – 558, https://doi.org/10.1016/0013-7944(87)90108-1
Cortese L, Nalli F, Rossi M (2016) A nonlinear model for ductile damage accumulation under multiaxial non-proportional loading conditions. International Journal of Plasticity 85:77–92
Driemeier L, Brünig M, Micheli G, Alves M (2010) Experiments on stress-triaxiality dependence of material behavior of aluminum alloys. Mechanics of Materials 42(2):207 – 217, https://doi.org/10.1016/j.mechmat.2009.11.012
Dunand M, Mohr D (2011) On the predictive capabilities of the shear modified Gurson and the modified Mohr-Coulomb fracture models over a wide range of stress triaxialities and Lode angles. Journal of the Mechanics and Physics of Solids 59:1374–1394, https://doi.org/10.1016/j.jmps.2011.04.006
Gao X, Zhang G, Roe C (2010) A study on the efect of the stress state on ductile fracture. International Journal of Damage Mechanics 19:75–94
Gerke S, Adulyasak P, Brünig M (2017) New biaxially loaded specimens for the analysis of damage and fracture in sheet metals. International Journal of Solids and Structures 110-111:209 – 218, https://doi.org/10.1016/j.ijsolstr.2017.01.027
Gerke S, Zistl M, Bhardwaj A, Brünig M (2019) Experiments with the X0-specimen on the effect of non-proportional loading paths on damage and fracture mechanisms in aluminum alloys. International Journal of Solids and Structures 163:157 – 169, https://doi.org/10.1016/j.ijsolstr.2019.01.007
Green D, Neale K, MacEven S, Makinde A, Perrin R (2004) Experimental investigation of the biaxial behaviour of an aluminum sheet. International Journal of Plasticity 20:1677–1706
Kulawinski D, Nagel K, Henkel S, Hübner P, Fischer H, Kuna M, Biermann H (2011) Characterization of stress-strain behavior of a cast trip steel under different biaxial planar load ratios. Engineering Fracture Mechanics 78:1684–1695
Kuwabara T (2007) Advances in experiments on metal sheet and tubes in support of constitutive modeling and forming simulations. International Journal of Plasticity 23:385–419
Roth C, Mohr D (2016) Ductile fracture experiments with local proportional loading histories. International Journal of Plasticity 79:328–354
Roux E, Shakoor M, Bernacki M, Bouchard P (2014) A new finite element approach for modeling ductile damage void nucleation and growth - analysis of loading path effect on damage mechanisms. Modeling and Simulation in Materials Science and Engineering 22:1–23
Wang J, Chow CL (1989) Mixed mode ductile fracture studies with nonproportional loading based on continuum damage mechanics. Trans ASME Journal of Engineering Materials Technology 111(2):204–209, https://doi.org/10.1115/1.3226455
Zhuang X, Wang T, Zhu X, Zhao Z (2016) Calibration and application of ductile fracture criterion under non-proportional loading conditions. Engineering Fracture Mechanics 165:39–56
Acknowledgements
The project has been funded by the Deutsche Forschungsgemeinshaft (DFG, German Research Foundation) – project number 322157331, this financial support is gratefully acknowledged. The SEM images of the fracture surfaces presented in this paper were performed at the Institut für Werkstoffe im Bauwesen, Bundeswehr University Munich and the support ofWolfgang Saur is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Brünig, M., Gerke, S., Zistl, M. (2020). Experiments on Damage and Fracture Mechanisms in Ductile Metals Under Non-proportional Loading Paths. In: Altenbach, H., Brünig, M., Kowalewski, Z. (eds) Plasticity, Damage and Fracture in Advanced Materials . Advanced Structured Materials, vol 121. Springer, Cham. https://doi.org/10.1007/978-3-030-34851-9_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-34851-9_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34850-2
Online ISBN: 978-3-030-34851-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)