Abstract
The voltage-source inverter (VSI) is a fundamental power electronic drive where high-performance control for three-phase electrical machines can be achieved. The continuous improvement of power devices that increasingly improve their performance, such as high electron mobility transistor (HEMT) devices, allows higher efficiencies and more and more wide range of use. The inverter is not only a three-phase bridge made by three half-bridge legs but also needs other elements for its correct operation. For example, the stability of the voltage source required by the three-phase bridge is key to optimizing its performance. Also, the inverter and machine protection elements allow having a safe behavior in the abnormal situations that prevent its destruction and other near components. These protection elements which join the control logic constitute the motor control unit (MCU). The analysis of the switching and conduction losses in the power devices is analyzed in detail, as well as the effects of capacitances, inductances, and parasitic resistances. The key elements, such as gate drivers, are also analyzed and even for devices in parallel. The effects of high dv/dt are also analyzed, especially when the length of the connection power cable between the inverter and the machine is considerable, providing different solutions such as the use of sinusoidal filters. In this chapter, all the necessary parts for the design of a VSI for control of three-phase machines are entered in detail, providing simulations and results for better understanding, as well as a complete model of a VSI (power plant).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Balogh L (2013) Design and application guide for high speed MOSFET gate drive circuits
Barkhordarian V (1997) Power MOSFET basics. International Rectifier, Technical Paper
Beig AR, Ranganathan VT (2006) A novel CSI fed induction motor drive. IEEE Trans Power Electron 21(4):1073–1082
Bhagwat PM, Stefanovic VR (1983) Generalized structure of a multilevel PWM inverter. IEEE Trans Ind Appl IA-19:1057–1069
Bierhoff MH, Fuchs FW (2004) Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation 4:2836–2842
Blasko V et al (1998) Sampling of discontinuous voltage and current signals in electric drives-a system approach. IEEE Trans Ind Appl 34(5):1123–1130
Boglietti A, Carpaneto E (1999) Induction motor high frequency model. In: Proceedings of 34th IEEE industry applications society conference (IAS’99), October 3–7, Phoenix, AR
Chen L, Peng FZ (2008) Dead-time elimination for voltage source inverters. IEEE Trans Power Electron 23(2):574–580
Deng Y, Liang Z, Xia P et al (2019) J Electr Eng Technol 14:219. https://doi.org/10.1007/s42835-018-00023-7
Grandi G, Casadei D, Massarini A (1997) High frequency lumped-parameter model for AC motor windings. In: Proceedings of 7th European conference on power electronics and applications (EPE’97), vol 2, pp 578–583, Trondheim, Belgium
Khodaparastan M, Mohamed A (2017) Supercapacitors for electric rail transit system. In: 6th International conference on renewable energy research and application, vol 5, pp 1–6
Kolar JW, Ertl H, Zach FC (1991) Influence of the modulation method on the conduction and switching losses of a PWM converter system. IEEE Trans Ind Appl 27:1063–1075
Leggate D, Kerkman RJ (1997) Pulse-based dead-time compensator for PWM voltage inverters. IEEE Trans Ind Electron 44(2):191–197
Munoz-Garcia A, Lipo TA (1998) On-line dead-time compensation technique for open-loop PWM-VSI drives. In: Proceeding of IEEE Applications Power Electronics Conference, Feb. 1998, pp 95–100
Reusch D, Strydom J (2013) Understanding the effect of PCB layout on circuit performance in a high frequency gallium nitride based point of load converter. In: APEC 2013, IEEE transactions on power electronics 2014
Sepe RB et al (1994) Implementation of discrete-time field-oriented current control. IEEE Ind Appl 30(3):723–727
Sukegawa T, Kamiyama K, Mizuno K, Matsui T, Okuyama T (1991) Fully digital, vector-controlled PWM VSI-Fed ac drives with an inverter dead-time compensation strategy. IEEE Trans Ind Appl 21(3):552–559
von Jouanne A, Enjeti P (1997) Design considerations for an inverter output filter to mitigate the effects of long motor leads on ASD applications. IEEE Trans Ind Appl 33(5):1138–1145
Vujacic M, Hammami M, Srndovic M, Grandi G (2018) Analysis of dc-link voltage switching ripple in three-phase PWM inverters. Energies 11(2):471
Yamamoto Y et al (1992) Digital current control method of induction motor using synchronous current detection with PWM signals. Trans IEE-Japan 112-D(7):613–622
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Molina Llorente, R. (2020). Analysis of Three-Phase Voltage-Source Inverters. In: Practical Control of Electric Machines. Advances in Industrial Control. Springer, Cham. https://doi.org/10.1007/978-3-030-34758-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-34758-1_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34757-4
Online ISBN: 978-3-030-34758-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)