Abstract
The electric machine based on a control system with the machine model is not a simple task but requires necessary simulation tools to understand its basic operation. The complexity of their models suggests performing first simulations both in open and closed loop, without using an electric drive (VSI or DC servo stage). High-performance control, such as vector control for AC machines, can be achieved with excellent results by using suitable simulations. The machine control simulations are increasingly because represents an ideal tool to achieve extraordinary results in a relatively short time of development. This chapter deals with the speed and current loop control theory of the rotation loads by using a DC machine as an introduction of AC machine vector control. Some simulations’ results with and without electric drive are illustrated. The chapter continues with the theoretical and practical part of vector control through simulations without electric drive, as well as the practical development of magnitude and position flux observers, and estimators for sensorless systems. The most relevant AC machines on the market are covered, such as the induction machine, the permanent magnet synchronous machine (PMSM), the synchronous reluctance machine (SynRM), and its variant, the permanent magnet-assisted synchronous reluctance machine (PMASynRM).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Deur J (1999) Kompenzacija uÄŤinaka elastiÄŤnosti i trenja u prijenosnim mehanizmima slijednih sustava (in Croatian), Doctoral thesis, University of Zagreb, Zagreb, Croatia
Foulon E, Forgez C, Loron L (2007) Resistances estimation with an extended Kalman filter in the objective of real-time thermal monitoring of the induction machine. IET Electr Power Appl 1(4):549–556
Hinkkanen M, Luomi J (2003) Modified integrator for voltage model flux estimation of induction motors. IEEE Trans Ind Electron 50(4)
Jansen PL, Lorenz RD (1994) A physically insightful approach to the design and accuracy assessment of flux observers for field-oriented I.M. drives. IEEE Trans Ind Appl 30:101–110
Jansen PL, Lorenz RD, Novotny DW (1994) Observer-based direct field orientation: analysis and comparison of alternative methods. IEEE Trans Ind Appl 30:945–953
Kim S-H, Sul S-K (1997) Voltage control strategy for maximum torque operation of an induction machine in the field-weakening region. IEEE Trans Ind Electron 44(4):512–518
Kim S-H, Sul SK, Park MH (1995) Maximum torque control of an induction machine in the field weakening region. IEEE Trans Ind Appl 31(4):787–794
Lascu C, Boldea I, Blaabjerg F (2000) A modified direct torque control for induction motor sensorless drive. IEEE Trans Ind Appl 36:122–130
Otýpka J et al (2016) The enlarged d-q model of induction motor with the iron loss and saturation effect of magnetizing and leakage inductance. In: Department of electrical engineering FEECS, technical university of Ostrava. The Czech Republic. Springer International Publishing Switzerland
Perić N (1979) Optimiranje sistema za pozicioniranje s reguliranim istosmjernim elektromotornim pogonom (in Croatian), Master thesis, University of Zagreb, Zagreb, Croatia
Sul S-K (2011) Control of electric machine drive systems. Wiley-IEEE Press
Vas P (1993) Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines (Monographs in Electrical and Electronic Engineering)
Yoo A, Sul S-K (2008) Design of flux observer robust to parameter variation of interior permanent magnet synchronous motor. In: Proceedings of industry applications society annual meeting, vol 1, pp 1–7, 5–9
Zai L-C, DeMarco CL, Lipo TA (1992) An extended Kalman filter approach to rotor time constant measurement in PWM induction motor drives. IEEE Trans Ind Appl 28(1):96–104
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Molina Llorente, R. (2020). Practical Control of AC Machine. In: Practical Control of Electric Machines. Advances in Industrial Control. Springer, Cham. https://doi.org/10.1007/978-3-030-34758-1_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-34758-1_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34757-4
Online ISBN: 978-3-030-34758-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)