Abstract
Orthopedic implant-associated infections caused by pathogenic bacteria, especially the Staphylococcus genus, have been a medical and surgical challenge. The infections not only delay the healing process, and have patients suffer from severe pain and even be subjected to re-implantation, but also cause enormous economic losses. It is clear that both a reduction of bacterial infections and acceleration of bone healing are critical to improving the osseointegration of orthopedic implants. Recently, various antibacterial coatings have been employed for the surface modification of orthopedic implants to reduce the bacterial infections. Interestingly, it has been found that some antibacterial coatings, including polycations and metal cations, also possess osteoinductive properties, and thus effectively speed up the healing process. In this chapter, we will shed light on the antibacterial and osteogenic mechanisms of positively charged biomaterials and present some typical cationic antimicrobial coatings with osteoinductive properties in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lobb DC, DeGeorge BR, Chhabra AB (2019) Bone graft substitutes: current concepts and future expectations. J Hand Surg Am 44(6):497-505.e2
Lu H, Liu Y, Guo J, Wu H, Wang J, Wu G (2016) Biomaterials with antibacterial and osteoinductive properties to repair infected bone defects. Int J Mol Sci 17(3):334
Campoccia D, Montanaro L, Arciola CR (2006) The significance of infection related to orthopedic devices and issues of antibiotic resistance. Biomaterials 27(11):2331–2339
Poortinga AT, Bos R, Norde W, Busscher HJ (2002) Electric double layer interactions in bacterial adhesion to surfaces. Surf Sci Rep 47(1):1–32
Ding X, Duan S, Ding X, Liu R, Xu F-J (2018) Versatile antibacterial materials: an emerging arsenal for combatting bacterial pathogens. Adv Funct Mater 28(40):1802140
Croes M, Bakhshandeh S, van Hengel IAJ, Lietaert K, van Kessel KPM, Pouran B, van der Wal BCH, Vogely HC, Van Hecke W, Fluit AC, Boel CHE, Alblas J, Zadpoor AA, Weinans H, Amin Yavari S (2018) Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium. Acta Biomater 81:315–327
Heidenau F, Mittelmeier W, Detsch R, Haenle M, Stenzel F, Ziegler G, Gollwitzer H (2005) A novel antibacterial titania coating: metal ion toxicity and in vitro surface colonization. J Mater Sci Mater Med 16(10):883–888
Grass G, Rensing C, Solioz M (2011) Metallic copper as an antimicrobial surface. Appl Environ Microbiol 77(5):1541–1547
Miron RJ, Zhang YF (2012) Osteoinduction: a review of old concepts with new standards. J Dent Res 91(8):736–744
Hu L, Yin C, Zhao F, Ali A, Ma J, Qian A (2018) Mesenchymal stem cells: cell fate decision to osteoblast or adipocyte and application in osteoporosis treatment. Int J Mol Sci 19(2):360
Long F (2012) Building strong bones: molecular regulation of the osteoblast lineage. Nat Rev Mol Cell Biol 13(1):27–38
Krishnan V, Dhurjati R, Vogler EA, Mastro AM (2010) Osteogenesis in vitro: from pre-osteoblasts to osteocytes. In Vitro Cell Dev Biol-Animal 46(1):28–35
Shahi M, Peymani A, Sahmani M (2017) Regulation of bone metabolism. Rep Biochem Mol Biol 5(2):73-82
Marie PJ, Haÿ E, Saidak Z (2014) Integrin and cadherin signaling in bone: role and potential therapeutic targets. Trends Endocrinol Metab 25(11):567–575
Götz W, Reichert C, Canullo L, Jäger A, Heinemann F (2012) Coupling of osteogenesis and angiogenesis in bone substitute healing—a brief overview. Ann Anat 194(2):171–173
Grosso A, Burger MG, Lunger A, Schaefer DJ, Banfi A, Maggio ND (2017) It takes two to tango: coupling of angiogenesis and osteogenesis for bone regeneration. Front Bioeng Biotechnol 5:68
Shi L, Zhang W, Yang K, Shi H, Li D, Liu J, Ji J, Chu PK (2015) Antibacterial and osteoinductive capability of orthopedic materials via cation–π interaction mediated positive charge. J Mater Chem B 3(5):733–737
Schaer TP, Stewart S, Hsu BB, Klibanov AM (2012) Hydrophobic polycationic coatings that inhibit biofilms and support bone healing during infection. Biomaterials 33(5):1245–1254
Makihira S, Shuto T, Nikawa H, Okamoto K, Mine Y, Takamoto Y, Ohara M, Tsuji K (2010) Titanium immobilized with an antimicrobial peptide derived from histatin accelerates the differentiation of osteoblastic cell line, MC3T3-E1. Int J Mol Sci 11(4):1458–1470
Tripathi JK, Pal S, Awasthi B, Kumar A, Tandon A, Mitra K, Chattopadhyay N, Ghosh JK (2015) Variants of self-assembling peptide, KLD-12 that show both rapid fracture healing and antimicrobial properties. Biomaterials 56:92–103
Lee PH, Chen MY, Lai YL, Lee SY, Chen HL (2018) Human beta-defensin-2 and -3 mitigate the negative effects of bacterial contamination on bone healing in rat calvarial defect. Tissue Eng A 24(7–8):653–661
Choe H, Narayanan AS, Gandhi DA, Weinberg A, Marcus RE, Lee Z, Bonomo RA, Greenfield EM (2015) Immunomodulatory peptide IDR-1018 decreases implant infection and preserves osseointegration. Clin Orthop Relat Res 473(9):2898–2907
Keselowsky BG, Collard DM, García AJ (2005) Integrin binding specificity regulates biomaterial surface chemistry effects on cell differentiation. Proc Natl Acad Sci U S A 102(17):5953–5957
Sabanai K, Tsutsui M, Sakai A, Hirasawa H, Tanaka S, Nakamura E, Tanimoto A, Sasaguri Y, Ito M, Shimokawa H, Nakamura T, Yanagihara N (2008) Genetic disruption of all NO synthase isoforms enhances BMD and bone turnover in mice in vivo: involvement of the renin-angiotensin system. J Bone Miner Res 23(5):633–643
Zhang W, Liu J, Shi H, Yang K, Wang P, Wang G, Liu N, Wang H, Ji J, Chu PK (2016) Communication between nitric oxide synthase and positively-charged surface and bone formation promotion. Colloids Surf B: Biointerfaces 148:354–362
Josse J, Velard F, Gangloff SC (2015) Staphylococcus aureus vs. osteoblast: relationship and consequences in osteomyelitis. Front Cell Infect Microbiol 5:85
Wu C, Zhou Y, Xu M, Han P, Chen L, Chang J, Xiao Y (2013) Copper-containing mesoporous bioactive glass scaffolds with multifunctional properties of angiogenesis capacity, osteostimulation and antibacterial activity. Biomaterials 34(2):422–433
Burghardt I, Lüthen F, Prinz C, Kreikemeyer B, Zietz C, Neumann H-G, Rychly J (2015) A dual function of copper in designing regenerative implants. Biomaterials 44:36–44
Wu Q, Li J, Zhang W, Qian H, She W, Pan H, Wen J, Zhang X, Liu X, Jiang X (2014) Antibacterial property, angiogenic and osteogenic activity of Cu-incorporated TiO2 coating. J Mater Chem B 2(39):6738–6748
Prinz C, Elhensheri M, Rychly J, Neumann H-G (2017) Antimicrobial and bone-forming activity of a copper coated implant in a rabbit model. J Biomater Appl 32(2):139–149
Ren L, Wong HM, Yan CH, Yeung KW, Yang K (2015) Osteogenic ability of Cu-bearing stainless steel. J Biomed Mater Res Part B Appl Biomater 103(7):1433–1444
Ren L, Yang K, Guo L, Chai H-w (2012) Preliminary study of anti-infective function of a copper-bearing stainless steel. Mater Sci Eng C 32(5):1204–1209
Acknowledgments
This work was financially supported by the National Key R&D Program of China (2018YFC1105402 and 2017YFA0207202), the National Natural Science Foundation of China (21706222 and 21875189), Key R&D Program of Jiangsu Province (BE2017740), the open research fund of Key Laboratory for Organic Electronics and Information Displays, and the Fundamental Research Funds for the Central Universities.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Song, Q., Pei, Y., Ye, X., Li, P., Huang, W. (2020). Cationic Antimicrobial Coatings with Osteoinductive Properties. In: Li, B., Moriarty, T., Webster, T., Xing, M. (eds) Racing for the Surface. Springer, Cham. https://doi.org/10.1007/978-3-030-34471-9_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-34471-9_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34470-2
Online ISBN: 978-3-030-34471-9
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)