Abstract
When the smart meter remote meter reading failure, the staff need one-on-one meter reading on-site, resulting in great workload, a semi-active RFID-based smart single-phase smart meters are designed. A single-phase smart meter based on RFID semi-active technology was designed to achieve the goal of non-contact fast, efficient and batch meter reading. The FM3307 MCU produced by Fudan Microelectronics Co., Ltd., the ATT7053BU high-precision measurement chip produced by Juquan Company and the RENSAS (R5F212BC) 8-bit machine produced by Fudan Microelectronics Co., Ltd. were adopted to design the power supply unit, the metering unit, the load control unit, the communication unit, Clock and memory cells and other core circuits. Three-tier architecture, modular design ideas are used to divide the software functions, and through a unified interface, data exchange between modules is achieved, this method is easy to mount and remove any module, which will help the expansion and deletion of features. Hardware and software debugging, machine performance test results show that the batch, fast meter reading function of the smart meter is realized, effectively reducing the workload on-site, which has a certain value of promotion and application.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Minghu, Z., Wei, Z., Xin, Y., Zhan, Q.: Design and implementation of the RFID traceability management system for hand - held devices. Process Autom. Instrum. 38(01), 57–60 (2017)
Centscents, H., Junqiao, X.: Design of wireless handheld terminal based on SX1233. Electron. Des. Eng. 19(24), 4–6 (2011)
Yuejiao, W.: RFID-Based Batch Identification of the Application of RF Gate. Zhengzhou University, Zhengzhou (2015)
Xu Renheng, Q., Jingzhi, L.D., Puzhi, Y., Longdi, G.: Research on the full life cycle management system of smart meters. Electr. Meas. Instrum. 54(01), 67–70 (2017)
Bo, C., Kaihua, L.: STM32 RFID handheld terminal hardware design. SCM Embed. Syst. Appl. 12(04), 45–48 (2012)
Guowei, W., Zongpu, J., Weiping, P.: Two-way authentication protocol for mobile RFID based on dynamic shared key. J. Electron. 45(03), 612–618 (2017)
Bo, C.: Based on CLRC632 and STM32 RFID Reader Circuit Design. Tianjin University, Tianjin (2012)
Hang, Z., Wei, H., Chen, Yu., Bing, L., Junhong, Z., Huanghuang, Z.: Design of point to point communication performance testing platform for broadband power line carrier. Electr. Meas. Instrum. 53(21), 100–105 (2016)
Xinchun, L., Yongxin, Y.: Design of mobile 13.5 MHz RFID reader. J. Comput. Appl. 20(08), 229–232 (2011)
Yufeng, Z., Chengwei, C.: Design of handheld RFID reader based on CLRC632. J. Wuxi Vocat. Tech. Coll. 12(01), 25 (2013)
Acknowledgements
The project funds are derived from the science and technology projects of China State Grid Corporation (5216A01600VZ).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Xiangqi, X., Xiangqun, C., Maotao, Y., Rui, H., Yanjiao, H., Wencheng, X. (2020). Design of Single-Phase Intelligent Meter Based on RFID Semi Active Technology. In: Xhafa, F., Patnaik, S., Tavana, M. (eds) Advances in Intelligent Systems and Interactive Applications. IISA 2019. Advances in Intelligent Systems and Computing, vol 1084. Springer, Cham. https://doi.org/10.1007/978-3-030-34387-3_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-34387-3_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34386-6
Online ISBN: 978-3-030-34387-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)