Abstract
Main problems occurring in Product-Service Systems (PSSs), are due to an inadequate requirements analysis and lack of a strong PSS conceptual design. Problems vary from exceeding budgets, to missing functionalities, unsuccessful market launch, or even project abortion. Furthermore, the special characteristics of a PSS have to be considered already at an early stage of the development process. Requirements Engineering (RE) and design methodology as well as supporting Information and Communication Technologies (ICT) need to establish a common perception of the targeted PSS. At the same time, the inner complexity of PSS leaves requirements analysis, design activities and development tasks fragmented among many disciplines and sometimes conflicting, unstable, unknowable or not fully defined. In this context, a concurrent, transdisciplinary and collaborative design of PSS is required to create feasible and successful solutions. The objective of this chapter is to present a structured approach to face the specific challenges of PSS development in detail, to elaborate a general framework that features a systematic approach for PSS development, and to consider the effects of changes in specific product and service design on a systematic PSS development process.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Hauksdóttir D, Mortensen NH, Nielsen PE (2013) Identification of a reusable requirements structure for embedded products in a dynamic market environment. Comput Ind 64(4):351–362. https://doi.org/10.1016/j.compind.2012.10.008
Garetti M, Rosa P, Terzi S (2012) Life cycle simulation for the design of product-service systems. Comput Ind 63(4):361–369
Aurich JC, Fuchs C, Wagenknecht C (2006) Life cycle oriented design of technical product-service systems. J Clean Prod 14(17):1480–1494. https://doi.org/10.1016/j.jclepro.2006.01.019
Welp EG, Meier H, Sadek T, Sadek K (2008) Modelling approach for the integrated development of industrial product- service systems. In: Proceeding of 41st CIRP conference on manufacturing systems
Komoto H, Tomiyama T (2008) Integration of a service CAD and a life cycle simulator. CIRP Ann—Manuf Technol 57(1):9–12
Shimomura Y, Hara T, Arai T (2009) A unified representation scheme for effective PSS development. In: CIRP Ann—Manuf Technol, pp 379–382
Marilungo E, Coscia E, Quaglia A, Peruzzini M, Germani M (2016) Open innovation for ideating and designing new product service systems. In: Proceeding of 8th CIRP conference on industrial product service systems, Bergamo, Italy
Sakao T, Shimomura Y (2006) Service engineering: a novel engineering discipline for producers to increase value combining service and product. In: Huisingh D et al. (eds) J Clean Prod 15(6):590–604
Tomiyama A (2005) A design methodology of services. In: Samuel A, Lewis W (eds) DS 35: proceedings ICED 05, the 15th international conference on engineering design. Melbourn, Barton, pp 1970–2014
Komoto H, Tomiyama T (2009) Systematic generation of PSS concepts using a service CAD tool. In: Sakao T, Lindahl M (eds) Introduction to product/service-system design. Springer, London, pp 71–92
Sakao T, Shimomura Y, Sundin E, Comstock M (2009) Modeling design objects in CAD system for service/product engineering. Comput Aided Des 41(41):197–213
Shimomura Y, Arai T (2009) Service engineering—methods and tools for effective PSS development. In: Sakao T, Lindahl M (eds) Introduction to product/service-system design. Springer, London, pp 113–136
Chirumalla K, Bertoni A, Ericson A, Isaksson O (2013) Knowledge-sharing network for product-service system development: is it atypical? The philosopher’s stone for sustainability. Springer, Berlin, pp 109–114. https://doi.org/10.1007/978-3-642-32847-3_18
Matzen D, Tan A, Andreasen MM (2005) Product/service-systems: proposal for models and terminology. In: Meerkamm H (eds) Design for X: Beiträge zum 16. Symposium. Erlangen: Lehrstuhl für Konstruktionstechnik, pp 27–38
Matzen D (2009) A systematic approach to service oriented product development. Stokkemarke: Scandinavian Digital Printing A/S, Ph.D. thesis
Tan A (2010) Service-oriented product development strategies. Scandinavian Digital Printing A/S, Stokkemarke
Peruzzini M, Marilungo E, Germani (2014b) Functional and ecosystem requirements to design sustainable P-S. In: Advances in transdisciplinary engineering, volume 1: moving integrated product development to service clouds in the global economy, proceedings 21st ISPE Inc. international conference on concurrent engineering (CE2014), pp 768–777. https://doi.org/10.3233/978-1-61499-440-4-768
Müller P (2013) Integrated engineering of products and services—layer-based development methodology for product-service systems. Fraunhofer IRB, Stuttgart
Miller D, Hope Q, Eisenstat R, Foote N, Galbraith J (2002) The problem of solutions: balancing clients and capabilities. Bus Horiz 45(2):3–12. https://doi.org/10.1016/S0007-6813(02)00181-7
Peruzzini M, Germani M, Favi C (2012) Shift from PLM to SLM: a method to support business requirements elicitation for service innovation in Product Lifecycle Management. In: Proceedings of IFIP advances in information and communication technology 388 AICT. Springer, New York, pp 111–123, https://doi.org/10.1007/978-3-642-35758-9_10
Wiesner S, Peruzzini M, Doumeingts G, Thoben KD (2012) Requirements engineering for servitization in manufacturing service ecosystems (MSEE). In: 4th CIRP IPS2 conference, Japan
Peruzzini M, Marilungo E, Germani M (2014a) A QFD-based methodology to support product-service design in manufacturing industry. In: Proceedings of 2014 international conference on engineering, technology and innovation: engineering responsible innovation in products and services ICE 2014, Bergamo, Italy, 23–25 June pp 1–7. https://doi.org/10.1109/ice.2014.6871572
Peruzzini M, Marilungo E, Germani M (2015) Structured requirements elicitation for product-service system. Int J Agile Syst Manag 8(3/4):189–218
Peruzzini M, Marilungo E (2016) User-centred approach for product- service design using virtual mock-ups. In: Proceedings 14th international design conference, DESIGN 2016, Cavtat, Dubrovnik, Croatia, 16–19 May 2016, in DS 84, pp 1805–1814
Mengoni M, Peruzzini M (2016) How to support the design of user-oriented product-related services. Proceedings 18th international conference on human-computer interaction, HCI international 2016, Toronto, Canada, 17–22 July 2016, in distributed, ambient and pervasive interactions, Lecture Notes in Computer Science, vol 9749, pp 103–110. https://doi.org/10.1007/978-3-319-39862-4_10
Nilsson P, Fagerström B (2006) Managing stakeholder requirements in a product modelling system. Comput Ind 57(2):167–177. https://doi.org/10.1016/j.compind.2005.06.003
Elgh F (2007) Modelling and management of manufacturing requirements in design automation systems. In: Loureiro G, Curran R (eds) Complex Syst Concurr Eng. Springer, London, pp 321–328
Rouse WB, Sage AP (2009) Handbook of systems engineering and management, 2nd edn. Wiley Series in Systems Engineering and Management. Wiley, Hoboken, NJ
Boehm B, Basili VR (2001) Top 10 list [software development]. Computer 34(1):135–137. https://doi.org/10.1109/2.962984
Nuseibeh B, Easterbrook S (2000) Requirements engineering. In: Finkelstein A (ed) ICSE’00 Proceedings of the conference on the future of software engineering, Limerick, Ireland, pp 35–46. https://doi.org/10.1145/336512.336523
Baxter D, Gao J, Case K, Harding J, Young B, Cochrane S, Dani S (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robot Comput-Integr Manuf 24(4):585–593. https://doi.org/10.1016/j.rcim.2007.07.010
Laporti V, Borges MRS, Braganholo VP (2007) A collaborative approach to requirements elicitation. In: 11th international conference on computer supported cooperative work in design, Melbourne, Australia, pp 734–739. https://doi.org/10.1109/cscwd.2007.4281527
Azadegan A, Papamichail KN, Sampaio P (2013) Applying collaborative process design to user requirements elicitation: a case study. Comput Ind 64(7):798–812. https://doi.org/10.1016/j.compind.2013.05.001
Goedkoop MJ, van Halen CJG, Te Riele HRM, Rommens PJM (1999) Product service systems—ecological and economic basics
Baines TS, Lightfoot HW, Evans S, Neely A, Greenough R, Peppard J, Roy R, Shehab E, Braganza A, Tiwari A, Alcock JR, Angus JP, Bastl M, Cousens A, Irving P, Johnson M, Kingston J, Lockett H, Martinez V, Michele P, Tranfield D, Walton IM, Wilson H (2007) State-of-the-art in product-service systems. Proc Inst Mech Eng, Part B: J Eng Manuf 221(10):1543–1552. https://doi.org/10.1243/09544054JEM858
Meier H, Roy R, Seliger G (2010) Industrial product-service systems—IPS2 CIRP annals. Manuf Technol 59(2):607–627. https://doi.org/10.1016/j.cirp.2010.05.004
Pahl G, Beitz W (2007) Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung; Methoden und Anwendung, 7th edn. Springer-Lehrbuch
van Husen C (2007) Anforderungsanalyse für produktbegleitende Dienstleistungen. IPA-IAO-Forschung und Praxis, Nr. 458. Jost-Jetter, Heimsheim
Berkovich M, Leimeister JM, Krcmar H (2011) Requirements engineering für product service systems. Wirtschaftsinf 53(6):357–370. https://doi.org/10.1007/s11576-011-0301-3
Ehrlenspiel K (2007) Integrierte Produktentwicklung: Denkabläufe, Methodeneinsatz, Zusammenarbeit, 3rd edn. Hanser, München
Ulrich KT, Eppinger SD (2012) Product design and development, 5th edn. McGraw-Hill, New York
Ahrens G (2000) Das Erfassen und Handhaben von Produktanforderungen: Methodische Voraussetzungen und Anwendung in der Praxis
Lindemann U (2009) Methodische Entwicklung technischer Produkte. Springer, Berlin, Heidelberg
Liu X, Raorane S, Leu MC (2007) A web-based intelligent collaborative system for engineering design. In: Li WD, McMahon C, Ong SK, Nee AYC (eds) Collaborative product design and manufacturing methodologies and applications. Springer Series in Advanced Manufacturing. Springer, London, pp. 37–58
Murthy DNP, Rausand M, Østerås T (2008) Product reliability: specification and performance. Springer Series in Reliability Engineering. Springer, London
Berkovich M, Leimeister JM, Krcmar H (2009) Suitability of product development methods for hybrid products as bundles of classic products, software and service elements. In: ASME 2009 international design engineering technical conferences and computers and information in engineering conference, San Diego, California, USA, August 30–September 2, pp 885–894. https://doi.org/10.1115/detc2009-86939
Bullinger HJ, Scheer AW, Schneider K (2006) Service Engineering: Entwicklung und Gestaltung innovativer Dienstleistungen, 2nd edn. Springer, Berlin
Bullinger HJ, Schreiner P (2006) Service Engineering: Ein Rahmenkonzept für die systematische Entwicklung von Dienstleistungen. In: Bullinger HJ, Scheer AW (eds) Service engineering. Springer, Berlin/Heidelberg, pp 53–84
Spath D, Demuß L (2006) Entwicklung hybrider Produkte - Gestaltung materieller und immaterieller Leistungsbündel. In: Bullinger HJ, Scheer AW (eds) Service engineering. Springer, Berlin/Heidelberg, pp 463–502
Ramaswamy R (1996) Design and management of service processes. Engineering process improvement series. Addison-Wesley Pub. Co., Reading, MA
Edvardsson B, Olsson J (1996) Key concepts for new service development. Serv Ind J 16(2):140–164. https://doi.org/10.1080/02642069600000019
Frietzsche U, Maleri R (2006) Dienstleistungsproduktion. In: Bullinger H-J, Scheer A-W (eds) Service engineering. Springer, Berlin/Heidelberg, pp 195–225
Kersten W, Kern EM, Zink T (2006) Collaborative service engineering. In: Bullinger HJ, Scheer AW (eds) Service engineering. Springer, Berlin/Heidelberg, pp 341–357. https://doi.org/10.1007/3-540-29473-2_14
Pohl K (2008) Requirements Engineering: Grundlagen, Prinzipien, Techniken, 2nd edn. Dpunkt-Verl, Heidelberg
Kotonya G, Sommerville I (1998) Requeriments engineering processes and techniques. Wiley, New York
van Lamsweerde A (2009) Requirements engineering: from system goals to UML models to software specifications. Wiley, Chichester, England, Hoboken, NJ
Hull E, Jackson K, Dick J (2005) Requirements engineering, 2nd edn. Springer, London
Aurum A, Wohlin C (2005) Engineering and managing software requirements. Springer, Berlin, London
Lanubile F (2009) Collaboration in distributed software development. In: Hutchison D, Kanade T, Kittler J, Kleinberg JM, Mattern F, Mitchell JC, Naor M, Nierstrasz O, Pandu Rangan C, Steffen B, Sudan M, Terzopoulos D, Tygar D, Vardi MY, Weikum G, de Lucia A, Ferrucci F (eds) Software engineering. Lecture Notes in Computer Science. Springer, Berlin, Heidelberg, pp 174–193
Whitehead J (2007) Collaboration in software engineering: a roadmap. In: Future of software engineering, Minneapolis, MN, USA, pp 214–225. https://doi.org/10.1109/fose.2007.4
Li Z, Rahman QA, Ferrari R, Madhavji NH (2009) Does requirements clustering lead to modular design? In: Hutchison D, Kanade T, Kittler J, Kleinberg JM, Mattern F, Mitchell JC, Naor M, Nierstrasz O, Pandu Rangan C, Steffen B, Sudan M, Terzopoulos D, Tygar D, Vardi MY, Weikum G, Glinz M, Heymans P (eds) Requirements engineering: foundation for software quality. Lecture Notes in Computer Science. Springer, Berlin, Heidelberg, pp 233–239
Lindahl M, Sundin E, Sakao T, Shimomura Y (2007) Integrated product and service engineering versus design for environment—a comparison and evaluation of advantages and disadvantages. In: Takata S, Umeda Y (eds) Advances in life cycle engineering for sustainable manufacturing businesses. Springer, London, pp 137–142
Aurich JC, Schweitzer E, Fuchs C (2007) Life cycle management of industrial product-service systems. In: Takata S, Umeda Y (eds) Advances in life cycle engineering for sustainable manufacturing businesses. Springer, London, pp 171–176
Elnadi M, Shehab E (2015) Main enablers and factors for successful implementation of lean in product-service systems. Int J Agile Syst Manag 8(3–4):332–354
Böhmann T, Langer P, Schermann M (2008) Systematische Überführung von kundenspezifischen IT-Lösungen in integrierte Produkt-Dienstleistungsbausteine mit der SCORE-Methode Wirtschaftsinf 50(3):196–207. https://doi.org/10.1365/s11576-008-0047-8
Vasantha GVA, Roy R, Lelah A, Brissaud D (2012) A review of product–service systems design methodologies. J Eng Des 23(9):635–659. https://doi.org/10.1080/09544828.2011.639712
Maussang N, Sakao T, Zwolinski P, Brissaud D, (2007) A model for designing product-service systems using functional analysis and agent based model. In: 16th international conference on engineering design (ICED’07), Paris, France
Morelli N (2006) Developing new product service systems (PSS): methodologies and operational tools. J Clean Prod 14(17):1495–1501. https://doi.org/10.1016/j.jclepro.2006.01.023
Freitag M, Kremer D, Hirsch M, Zelm M (2013) An approach to standardise a service life cycle management. In: Zelm M, van Sinderen M, Ferraira Pires L, Doumeingts G (eds) Enterprise interoperability. Wiley, Chichester, pp 115–126
Scheithauer G, Kett H, Kaiser J, Hackner S, Hu H, Wirtz G (2010) Business modeling for service engineering. In: Shin SY, Ossowski S, Schumacher M, Palakal MJ, Hung CC (eds) the 2010 ACM symposium, Sierre, Switzerland, p 118. https://doi.org/10.1145/1774088.1774113
Schweitzer E, Fiekers C, Möhrer J (2010) Realisierung investiver Produkt-Service Systeme. In: Aurich JC, Clement MH (eds) Produkt-Service Systeme. Springer, Berlin, Heidelberg, pp 95–116
Mont O (2002) Clarifying the concept of product-service system. J Clean Prod 10(3):237–245. https://doi.org/10.1016/S0959-6526(01)00039-7
Lindow K, Müller P, Stark R (2011) NEW job roles in global engineering‐from education to industrial deployment. In: Proceedings of the 18th international conference on engineering design (ICED 11), impacting society through engineering design, vol 8: design education. Lyngby/Copenhagen, Denmark, pp 205–215
Abramovici M, Aidi Y, Jin F, Göbel JC (2012) Lifecycle management von Hybriden Leistungsbündeln. In: Meier H, Uhlmann E (eds) Integrierte Industrielle Sach- und Dienstleistungen. Springer, Berlin, Heidelberg, pp 265–284
Müller P, Stark RR, Fraunhofer IP (2014). Integrated engineering of products and services: layer-based development methodology for product-service systems. Fraunhofer Verlag
Clarkson J, Eckert C (2005) Design process improvement: a review of current practice. Springer, London
Larsson A, Ericson Å, Larsson T, Isaksson O, Bertoni M (2010) Engineering 2.0: exploring lightweight technologies for the virtual enterprise. In: Randall D, Salembier P (eds) From CSCW to web 2.0: European developments in collaborative design. Computer supported cooperative work. Springer, London, pp 173–191
Chirumalla K (2013) Managing knowledge for product-service system innovation: the role of web 2.0 technologies. Res Technol Manag 56(2):45–53. https://doi.org/10.5437/08956308x5602045
Nemoto Y, Akasaka F, Shimomura Y (2015) A framework for managing and utilizing product–service system design knowledge. Prod Plan Control 26(14–15):1278–1289. https://doi.org/10.1080/09537287.2015.1033493
Cedergren SI, Elfving SW, Eriksson J, Parida V (2012) Analysis of the industrial product-service systems (IPS2) literature: a systematic review. In: 2012 IEEE 6th international conference on management of innovation & technology (ICMIT 2012), Bali, Indonesia, pp 733–740. https://doi.org/10.1109/icmit.2012.6225897
Zhang D, Hu D, Xu Y, Zhang H (2012) A framework for design knowledge management and reuse for product-service systems in construction machinery industry. Comput Ind 63(4):328–337. https://doi.org/10.1016/j.compind.2012.02.008
Zhu H, Gao J, Cai Q (2015) A product-service system using requirement analysis and knowledge management technologies. Kybernetes 44(5):823–842. https://doi.org/10.1108/K-11-2014-0244
Wewior J (2015) Role-play based assessment of IPS2-specific intellectual capital. Proc CIRP 30:415–420. https://doi.org/10.1016/j.procir.2015.02.127
Bertoni M (2010) Bottom-up knowledge sharing in PSS design. A classification framework. In: Marjanović D (eds) Design 2010: DS 60: proceedings of the 11th international design conference, Dubrovnik, Croatia, Zagreb, pp 1461–1470
Romero D, Rabelo RJ, Molina A (2012) On the management of virtual enterprise’s inheritance between virtual manufacturing & service enterprises: supporting “dynamic” product-service business ecosystems. In: 2012 18th international ICE conference on engineering, technology and innovation (ICE), Munich, Germany, pp 1–11. https://doi.org/10.1109/ice.2012.6297695
Stjepandić J, Verhagen WJC, Liese H, Bermell-Garcia P (2015) Knowledge-based engineering, In: Stjepandic J et al. (eds) Concurrent engineering in the 21st century: foundations, developments and challenges. Springer International, Switzerland, pp 255–286
Baxter D, Roy R, Doultsinou A, Gao J, Kalta M (2009) A knowledge management framework to support product-service systems design. Int J Comput Integr Manuf 22(12):1073–1088. https://doi.org/10.1080/09511920903207464
Kremer D, Leyh J (2010) Mit Technologietreiber-Rollen neue Technologien schneller in Produkte umsetzen B. Dworschak, & A. Karapidis, Professional Traing Facts, pp 49–74
Nergard H, Ericson A (2012) Changes in present product design—opportunities for industrial oriented research. In: 2012 IEEE 3rd international conference on cognitive infocommunications (CogInfoCom), Kosice, Slovakia, pp 499–503. https://doi.org/10.1109/coginfocom.2012.6422032
Mouritsen J, Larsen HT (2005) The 2nd wave of knowledge management: the management control of knowledge resources through intellectual capital information. Manag Account Res 16(3):371–394. https://doi.org/10.1016/j.mar.2005.06.006
Bell S (2006) Lean enterprise systems: using IT for continuous improvement. Wiley Series in Systems Engineering and Management. Wiley-Interscience, Hoboken, NJ
van den Ende J, Frederiksen L, Prencipe A (2015) The front end of innovation: organizing search for ideas. J Prod Innov Manag 32(4):482–487. https://doi.org/10.1111/jpim.12213
Budak C, Agrawal D, El Abbadi A (2011) Structural trend analysis for online social networks. Proc VLDB Endow 4(10):646–656. https://doi.org/10.14778/2021017.2021022
McGuinness DL, van Harmelen F (2004) OWL web ontology language overview. W3C Recommendation 10(10)
Nawroth C, Schmedding M, Brocks H, Kaufmann M, Fuchs M, Hemmje M (2015) Towards cloud-based knowledge capturing based on natural language processing. Procedia Comput Sci 68(2015):206–216
Bertoni M, Larsson AC (2010) Coping with the knowledge sharing barriers in product service systems design. In: Horváth I, Mandorli F, Rusak Z (eds) Tools and methods of competitive engineering: proceedings of the eighth international symposium on tools and methods of competitive engineering—TMCE 2010, 12–16 April 2008, Ancona, Italy. Delft University of Technology, Delft, Netherlands, pp 903–914
Nonaka I, Toyama R, Konno N (2000) SECI, Ba and leadership: a unified model of dynamic knowledge creation. Long Range Plan 33(1):5–34. https://doi.org/10.1016/S0024-6301(99)00115-6
Gries B, Restrepo J (2011) KPI measurement in engineering design: a case study. In: Proceeding of international conference on engineering design, ICED11, vol 1, pp 531–537
Deming WE (1992) Quality, productivity and competitive position, MitCenter for Advanced Engineering Study, place
Adams WM (2006) The future of sustainability: re-thinking environment and development in the twenty-first century. In: Technical report, IUCN renowned thinkers meeting
Dombrowski U, Schmidtchen K, Ebentreich D (2013) Ballanced key performance indicators in product development. Int J Mater, Mech Manuf 1(1):27–31
Abramovici M, Jin F, Dang HB (2013) An indicator framework for monitoring IPS2 in the use phase. In: Product-service integration for sustainable solutions, pp 311–322. https://doi.org/10.1007/978-3-642-30820-8_27
Mourtzis D, Doukas M, Fotia S (2015) Performance indicators for the evaluation of product-service systems design: a review. In: Proceeding of IFIP WG 5.7 international conference, Tokyo, Japan, vol 460. https://doi.org/10.1007/978-3-319-22759-7_68
Kerzner HR (2013) Project management metrics, KPIs, and dashboards: a guide to measuring and monitoring project performance. Proj Manag J 43(2):102. https://doi.org/10.1002/pmj.21263
McAloone TC, Mougaard K, Restrepo J, Knudsen S (2010) Eco-innovation in the value chain. In: Proceedings of international design conference, Dubrovinik, Croatia
Aurich JC, Mannweiler E, Schweitzer E (2010) How to design and offer services successfully. Proc CIRP J Manuf Sci Technol 2(3):136–143. https://doi.org/10.1016/j.cirpj.2010.03.002
Jeswiet J (2009) A definition for life cycle engineering. In: Proceedings of 36th international seminar on manufacturing systems, Saarbrucken, Germany
ISO 14040:2006 (2006) Environmental management—life cycle assessment—principles and framework
Woodward DG (1997) Life cycle costing—theory, information acquisition and application. J Proj Manag 15(6):335–344
Weidema B (2006) The integration of economic and social aspects in life cycle impact assessment. Int J Life Cycle Assess 11(1):89–96. https://doi.org/10.1065/lca2006.04.016
Peruzzini M, Marilungo E, Germani M (2013b) Product-service sustainability assessment in virtual manufacturing enterprises. IFIP International Federation for Information Processing AICT 408, Proceedings 14th IFIP WG 5.5 working conference on virtual enterprises, PRO-VE 2013, Dresden (Germany), 30 September–2 October 2013, Camarinha-Matos LM, Scherer RJ (eds), pp 13–21. ISSN 1868-4238, ISBN 978-3-642-40542-6. https://doi.org/10.1007/978-3-642-40543-3
Kwak M, Kim H (2013) Economic and environmental impacts of product service lifetime: a life-cycle perspective. In: Proceedings of 5th CIRP international conference on industrial product-service systems, Bochum, Germany. https://doi.org/10.1007/978-3-642-30820-8_16
Wognum N, Bil C, Elgh F, Peruzzini M, Stjepandić J, Verhagen WJC (2019) Transdisciplinary systems engineering: implications, challenges and research agenda. Int J Agile Syst Manag 12(1):58–89
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Peruzzini, M., Wiesner, S. (2019). Systematic Development of Product-Service Systems. In: Stjepandić, J., Wognum, N., J. C. Verhagen, W. (eds) Systems Engineering in Research and Industrial Practice. Springer, Cham. https://doi.org/10.1007/978-3-030-33312-6_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-33312-6_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-33311-9
Online ISBN: 978-3-030-33312-6
eBook Packages: Economics and FinanceEconomics and Finance (R0)