Abstract
This paper approaches the creation of a digital twin based on a real measuring process in order to convert it into digital form as a virtual model within a selected software-based virtualization environment. Subsequently, a real-world data comparative flow is obtained from sensors; afterward, analysis within their calculated uncertainties and the digital twin data values are made. Such treated real measuring process data are inserted into a database, from where they are compared with the virtual digital twin data, where necessary trending-based analysis is made, for the purpose of proactive maintenance and the measuring process optimization. Such collected data are also stored for later-planned analysis within the Industry 4.0 concept in the form of big data databases.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Vachálek J, Lokšík M, Morháč M, Bartalský L, Rovný O, Šišmišová D (2017) The digital twin of an industrial production line within the Industry 4.0 concept. In: Fikar M, Kvasnica M (eds) 21st international conference on process control (PC). IEEE, Red Hook USA, pp 258–262
Podolsky J (2010) Prediktívna údržba ako súčasť celkovej stratégie optimalizácie technických prostriedkov. AT&P J 10:34
Duchoň F (2015) Výrobné systémy a CIM, 1st edn. Nakladateľstvo STU, Bratislava
Palenčár R, Ďuriš S, Dovica M, Palenčár J (2015) Application of Monte Carlo method for evaluation of uncertainties of temperature measurement by SPRT. In: 21st world congress of the international measurement confederation, Prague. IMEKO, Budapest, pp 1194–1200
Palenčár R, Sopkuliak P, Palenčár J, Ďuriš S, Suroviak E, Halaj M (2017) Application of Monte Carlo Method for evaluation of uncertainties of ITS-90 by Standard Platinum Resistance Thermometer. Meas Sci Rev 17(3):108–116
JCGM 100—evaluation of measurement data—guide to the expression of uncertainty in measurement (GUM). GUM 1995 with minor corrections. JCGM, BIPM, Paris (2008). http://www.bipm.org/utils/common/documents/jcgm/JCGM_100_2008_E.pdf. Accessed 2018/04/12
Vítečková M, Víteček A, Babiuch M (2011) Unified approach to analog and digital two-degree-of-freedom PI controller tuning for integrating plants with time delay. Acta Montan Slovaca 1:89–94
Vasek V, Dostalek P, Dolinay J, Janacova D, Kolomazník K (2008) Microcontrollers and modern control methods. In: Proceedings of the 2nd WSEAS international conference on computer engineering and applications. WSEAS Press [IT], Mexico, pp 195–198
Acknowledgements
The authors would like to thank the Slovak University of Technology in Bratislava, the Slovak Institute of Metrology, and the grand agency APVV project no.: 15-0164, 15-0295 agency VEGA grant no.: 1/0317/17, and KEGA project no.: 027STU-4/2017. 9.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kučera, Ĺ., Vachálek, J., Melicher, M., Vašek, P., Slovák, J. (2020). The Digital Twin of a Measuring Process Within the Industry 4.0 Concept. In: Medvecký, Š., Hrček, S., Kohár, R., Brumerčík, F., Konstantová, V. (eds) Current Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-33146-7_38
Download citation
DOI: https://doi.org/10.1007/978-3-030-33146-7_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-33145-0
Online ISBN: 978-3-030-33146-7
eBook Packages: EngineeringEngineering (R0)