Abstract
The article deals with the diagram of the disposition of components and the creation of kinematic bonds of the test benches for transmission systems. The source of the drive on test benches is an electric motor. The article describes the configuration of components and the creation of kinematic bonds for the test bench with an open flow of mechanical power. The test bench also includes a dynamometer in addition to the electric motor. The article is also described an assembly procedure and creation kinematic bonds for test bench with a closed flow of mechanical power. In this, test bench used only an electric motor without a dynamometer. The electric motor is the same for both test benches. The kinematics of test benches is modeled and calculated in the Swiss program KissSys/KissSoft. As a result, the article deals with evaluation the energy balance of the individual test benches, especially by evaluation the energy balance of the electric motor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Li JY, Gou ZJ, Li Y (2005) A dynamic simulation of meshing force in gear meshing process based on ADAMS. Machinery 3
Gramblička S, Kohár R, Stopka M (2017) Dynamic analysis of mechanical conveyor drive system. Procedia Eng 192:259–264
Tomášiková M, Gajdošík T, Lukáč M, Brumerčík F (2017) Simulation of planetary gearbox. Commun, Sci Lett Univ Žilina 19(2A):48–53
Lukáč M, Brumerčík F, Krzywonos L, Krzysiak Z (2017) Transmission system power flow model. Commun, Sci Lett Univ Žilina 19(2):27–31
Liang X, Zuo MJ, Feng Z (2018) Dynamic modeling of gearbox faults, a review. Mech Syst Signal Process 98:852–876
KissSoft. Calculation software for machine design—design, analyse, optimize; online help
Acknowledgements
This study was supported by Cultural and Educational Grant Agency MŠVVaŠ under the contract no. 040ŽU-4/2016.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Herda, M., Kučera, Ĺ., Gajdošík, T., Benko, M. (2020). Evaluation of the Energy Balance on Test Bench with Open Power Flow and Closed Power Flow for Testing of Transmission. In: Medvecký, Š., Hrček, S., Kohár, R., Brumerčík, F., Konstantová, V. (eds) Current Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-33146-7_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-33146-7_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-33145-0
Online ISBN: 978-3-030-33146-7
eBook Packages: EngineeringEngineering (R0)