Abstract
The article deals with the contact analysis of selected toothed gears of the two-stage front gearbox. They are extensively used throughout the machine industry, but also in other mechanical devices where input parameters change to the required working values. The aim of this work is to point out the effect of deformations of the individual gear components on the correctness of the toothed engagement. The work deals with the contact analysis of selected gears of the two-stage front gearbox. The subject of the study is to determine the resulting coefficient of unevenness of the tooth load over the width of the contact for deformation of individual parts of the gearbox using the KISSsoft computerized software. The pc software KISSsoft has several ways to define a coefficient KHβ. The method using the ISO 6336 standard was used in this case. Due to load, the teeth of the wheels resiliently deform. This deformation has an effect in an enlargement of the coefficient of the toothed contact. The result is the processing of data and their evaluation for individual types of deformations of the parts of the gearbox unit and the subsequent evaluation of the overall impact on the life of the gearbox.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bašťovansky R, Tropp M, Lukáč M, Brumerčík F (2017) Molybdenum sheet metal test device. Commun Sci Lett Univ Žilina 19(2):124–127
Jedlinski L, Caban J, Krzywonos L, Wierzbicki S, Brumerčík F (2015) Application of vibration signal in the diagnosis of IC engine valve clearance. J Vibro Eng 17(1):175–187
Weis P, Kučera Ľ, Pecháč P, Močilán M (2017) Modal analysis of gearbox housing with applied load Elsevier. TRANSCOM 2017. International scientific conference on sustainable, modern and safe transport, high Tatras, Slovakia. University to Žilina, Žilina, EDIS, pp 953–958
Klebanov B, Barlam D, Nystrom F (2008) Machine elements life and design. CRC Press, USA
Malik L, Medvecký Š et al (2003) Časti a mechanizmy strojov. University of Žilina, Žilina, EDIS
Lukáč M, Brumerčík F, Krzywonos L, Krzysiak Z (2017) Transmission system power flow model. Commun Sci Lett Univ Žilina 19(2):27–31
ISO 6336:1996 (1996) The strength calculation of the front and cone wheels
Acknowledgements
This study was supported by Cultural and Educational Grant Agency MŠVVaŠ under the contract no. 040ŽU-4/2016.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Gramblička, S., Kohár, R., Majchrák, M., Vrabec, M. (2020). Contact Analysis of Selected Toothed Contact of the Two-Stage Front Gearbox. In: Medvecký, Š., Hrček, S., Kohár, R., Brumerčík, F., Konstantová, V. (eds) Current Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-33146-7_30
Download citation
DOI: https://doi.org/10.1007/978-3-030-33146-7_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-33145-0
Online ISBN: 978-3-030-33146-7
eBook Packages: EngineeringEngineering (R0)