Abstract
Growing individualization of products up to lot-size-1 and high volatility of product mixes lead to new challenges in the manufacturing domain, including the need for frequent reconfiguration of the system and reacting to changing orders. Thus, apart from functional aspects, safety aspects of the production system as well as product quality assurance aspects must be addressed for flexible and reconfigurable manufacturing systems at runtime. To cope with the mentioned challenges, we present an integrated model-based approach SQUADfps (machine Safety and product QUAlity for flexible proDuction systems) to support the automatic conduct of the risk assessment of flexible production scenarios in terms of safety as well as the process-FMEA to ensure that the requirements w.r.t. the quality of the production process and the resulting product are met. Our approach is based on a meta-model which captures all information needed to conduct both risk assessment and process-FMEA dynamically during the runtime, and thus enables flexible manufacturing scenarios with frequent changes of the production system and orders up to a lot-size of one while guaranteeing safety and product quality requirements. The automatically generated results will assist human in making further decisions. To demonstrate the feasibility of our approach, we apply it to a case study.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aagedal, J.O., den Braber, F., Dimitrakos, T., Gran, B.A., Raptis, D., Stolen, K.: Model-based risk assessment to improve enterprise security. In: Proceedings. Sixth International Enterprise Distributed Object Computing, pp. 51–62 (2002)
Arai, T., Aiyama, Y., Maeda, Y., Sugi, M., Ota, J.: Agile assembly system by “plug and produce”. CIRP Ann. 49(1), 1–4 (2000)
Awad, R., Fechter, M., van Heerden, J.: Integrated risk assessment and safety consideration during design of hrc workplaces. In: 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), pp. 1–10, September 2017
Bernard, R., Aubert, J.J., Bieber, P., Merlini, C., Metge, S.: Experiments in model based safety analysis: flight controls. IFAC Proc. Vol. 40(6), 43–48 (2007)
Cancila, D., et al.: Sophia: a modeling language for model-based safety engineering. In: 2nd International Workshop on Model Based Architecting and Construction of Embedded Systems, CEUR. Denver, Colorado, pp. 11–26 (2009)
Cichocki, T., Górski, J.: Failure mode and effect analysis for safety-critical systems with software components. In: Koornneef, F., van der Meulen, M. (eds.) SAFECOMP 2000. LNCS, vol. 1943, pp. 382–394. Springer, Heidelberg (2000). https://doi.org/10.1007/3-540-40891-6_33
Cichocki, T., Górski, J.: Formal support for fault modelling and analysis. In: Voges, U. (ed.) SAFECOMP 2001. LNCS, vol. 2187, pp. 190–199. Springer, Heidelberg (2001). https://doi.org/10.1007/3-540-45416-0_19
David, P., Idasiak, V., Kratz, F.: Towards a better interaction between design and dependability analysis: FMEA derived from UML/SysML models. In: Safety, Reliability and Risk Analysis: Theory, Methods and Applications, pp. 2259–2266 (2008)
Department of Defence: MIL-STD-1629A, Procedures for Performing a Failure Mode. Effects and Criticality Analysis, Washington (1980)
European Commission: Machinery Directive 2006/42/EC (2006)
Ferrer, B.R., Ahmad, B., Lobov, A., Vera, D.A., Lastra, J.L.M., Harrison, R.: An approach for knowledge-driven product, process and resource mappings for assembly automation. In: 2015 IEEE International Conference on Automation Science and Engineering (CASE), pp. 1104–1109. IEEE (2015)
Ford Motor Company: Potential Failure Mode and Effects Analysis - Instruction Manual (1988)
Grigoleit, F., et al.: The qSafe project-developing a model-based tool for current practice in functional safety analysis (2016)
Hassan, A., Siadat, A., Dantan, J.Y., Martin, P.: Conceptual process planning - an improvement approach using GFD, FMEA, and ABC methods. Robot. Comput.-Integr. Manuf. 26, 392–401 (2010). https://doi.org/10.1016/j.rcim.2009.12.002
Houmb, S.H., Den Braber, F., Lund, M.S., Stølen, K.: Towards a UML profile for model-based risk assessment. In: Critical Systems Development with UML-Proceedings of the UML 2002 Workshop, pp. 79–91 (2002)
International Electrotechnical Commission (IEC): IEC 62061: Safety of machinery - Functional safety of electrical, electronic and programmable electronic control systems (2005)
International Organization for Standardization (ISO): ISO 13849–1 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (2006)
Joshi, A., Whalen, M., Heimdahl, M.: Model-based safety analysis final report. NASA Techreport (2005)
Koo, C., Vorderer, M., Junker, S., Schröck, S., Verl, A.: Challenges and requirements for the safety compliant operation of reconfigurable manufacturing systems. Proc. CIRP 72, 1100–1105 (2018)
Koren, Y., et al.: Reconfigurable manufacturing systems. CIRP Ann. 48(2), 527–540 (1999)
Lisagor, O., Kelly, T., Niu, R.: Model-based safety assessment: review of the discipline and its challenges. In: The Proceedings of 2011 9th International Conference on Reliability, Maintainability and Safety, pp. 625–632. IEEE (2011)
Papadopoulos, Y., Parker, D., Grante, C.: Automating the failure modes and effects analysis of safety critical systems. In: International Symposium on High Assurance Systems Engineering (HASE 2004), pp. 310–311 (2004)
Papadopoulos, Y., Grante, C.: Evolving car designs using model-based automated safety analysis and optimisation techniques. J. Syst. Softw. 76(1), 77–89 (2005). computer Software and Applications
Prosvirnova, T., et al.: The altarica 3.0 project for model-based safety assessment. IFAC Proc. Vol. 46(22), 127–132 (2013)
Tarum, C.D.: Fmera-failure modes, effects, and (financial) risk analysis. Technical report, SAE Technical Paper (2001)
Teng, S.G., Ho, S.M.: Failure mode and effects analysis: an integrated approach for product design and process control. Int. J. Qual. Reliab. Manage. 13(5), 8–26 (1996)
Walker, M., Papadopoulos, Y., Parker, D., Lönn, H., et al.: Semi - automatic FMEA supporting complex systems with combinations and sequences of failures. SAE Int. J. Passeng. Cars - Mech. Syst. 2(1), 791–802 (2009)
Wang, H., Liu, S., Gao, C.: Study on model-based safety verification of automatic train protection system. In: 2009 Asia-Pacific Conference on Computational Intelligence and Industrial Applications (PACIIA), vol. 1, pp. 467–470. IEEE (2009)
Yilmaz, O., Davis, R.P.: Flexible manufacturing systems: characteristics and assessment. Eng. Manage. Int. 4(3), 209–212 (1987)
Acknowledgement
The work leading to this paper was funded by the German Federal Ministry of Education and Research under grant number 01IS16043Q and 01IS16043O (CrESt).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Koo, C.H., Rothbauer, S., Vorderer, M., Höfig, K., Zeller, M. (2019). SQUADfps: Integrated Model-Based Machine Safety and Product Quality for Flexible Production Systems. In: Papadopoulos, Y., Aslansefat, K., Katsaros, P., Bozzano, M. (eds) Model-Based Safety and Assessment. IMBSA 2019. Lecture Notes in Computer Science(), vol 11842. Springer, Cham. https://doi.org/10.1007/978-3-030-32872-6_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-32872-6_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-32871-9
Online ISBN: 978-3-030-32872-6
eBook Packages: Computer ScienceComputer Science (R0)