Abstract
Internal tractor test activities can be structured into A, B, C, and D, Table 8.1.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References – Translation of titles in ( )
Palmgren, A.: Die Lebensdauer von Kugellagern. (Service life of ball bearings). Z. VDI 68 (1924) No. 14, 339–341.
Kloth, W., and Th. Stroppel: Der Energiefluß im Zapfwellenbinder. (Energy flow of PTO-driven reaper-binder), Part 1–3. Technik in d. Landw. 13 (1932) No. 2, 49–50; No. 3, 66–69 and No. 4, 88–91.
Kloth, W., and Th. Stroppel: Kräfte, Beanspruchungen und Sicherheiten in den Landmaschinen. (Forces, stresses and safety margins in agricultural machinery design). Z. VDI 80 (1936) No. 4, 85–92.
Gaßner, E.: Festigkeitsversuche mit wiederholter Beanspruchung im Flugzeugbau. (Durability tests with repeated stress sequences for airplanes). Luftwissen 6 (1939) No. 2, 61–64. English translation see NACA Paper TM 1087 (1946).
Miner, M.A.: Cumulative damage in fatigue. J. Appl. Mech. 12 (1945) No. 3, A 159–164.
Haibach, E.: Modifizierte lineare Schadensakkumulationshypothese zur Berücksichtigung des Dauerfestigkeitsabfalls mit fortschreitender Schädigung. (Modified linear cumulative damage hypothesis addressing reduced endurance limit due to progressing damage). Note 50/70 of “Laboratorium für Betriebsfestigkeit”. Darmstadt 1970.
Ulrich, M., and H. Glaubitz: Dynamische Triebwerksbeanspruchungen von Kraftfahrzeugen, insbesondere bei Kupplungsbetätigung. (Dynamic transmission loads, mainly due to master clutch operations). Deutsche Kraftfahrtforschung No. 70 Berlin: VDI-Verlag 1942.
Straub, H.: Drehmomentmessungen an Lastwagen und Ackerschleppern. (Torque measurements on trucks and farm tractors). ATZ 58 (1956) No. 5, 139–144.
Buck, G.: Probleme bei der Berechnung von Fahrzeuggetrieben mit Lastkollektiven. (Issues when calculating vehicle transmissions with load spectra). In: VDI-Berichte 195, 37–56. Düsseldorf: VDI-Verlag 1973.
Gerlach, A.: Über die Kräfte in Zahnradgetrieben von Schleppern. (On forces in farm tractor transmissions). Grundl. Landtechnik. 6 (1956) No. 7, 107–710.
Jenkins, A.J.: Power and life investigation of the farm tractor drive components. SAE paper 219 B. Warrendale, PA: SAE 1960. Also as company paper of Timken.
[8.12] Graham, J.A., D.K. Berns, and D.R. Olberts: Cumulative Damage Used to Analyze Tractor Final Drives. Transactions ASAE 5 (1962) No. 2, 139–146.
Coenenberg, H.H.: Zum Verhalten der Kupplung … im Schleppertriebwerk. (On the influence of the master clutch … in farm tractor transmissions). Ph.D. thesis TH Braunschweig 1962. See also Grundl. Landtechnik 16 (1963).
Kulczewski, C.T.: How to improve durability of tractor final drive gears. SAE paper 650 684. Warrendale, PA: SAE 1965.
[8.15] Gerlach, A.: Field measurement of tractor transmission forces. Transactions ASAE 9 (1966) 707–712.
Gerlach, A.: Messung der Triebwerksbelastung eines Ackerschleppers. (Measured loads of a tractor transmission). Ph.D. thesis TH Braunschweig 1966.
Jaeckel, H.R.: Simulation, duplication, and synthesis of fatigue load histories. SAE paper 700 032. Warrendale, PA: SAE 1970.
Whelpley, T.D.: Simulation of Farm Tractor Field Loading Through Laboratory Programmed Control. SAE paper 730 820. Warrendale, PA: SAE 1973.
Renius, K.Th.: Last- und Fahrgeschwindigkeitskollektive als Dimensionierungsgrundlagen für die Fahrgetriebe von Ackerschleppern. (Load and speed spectra for dimensioning of tractor transmissions). Fortschritt-Ber. VDI-Z, Series 1, No. 49. Düsseldorf: VDI-Verlag 1976.
Renius, K.Th.: European Tractor Transmission Design Concepts. ASAE paper 76-1526. St. Joseph, MI ASAE 1976.
Renius, K.Th.: Betriebsfestigkeitsberechnungen von Maschinenelementen in Ackerschleppern mit Hilfe von Lastkollektiven. (Cumulative damage calculations of tractor machine elements with load spectra). Konstruktion 29 (1977), No. 3, 85–93.
Schaller, K.V.: Betriebsfestigkeitsuntersuchungen zur Grübchenbildung an einsatzgehärteten Stirnradflanken. (Research on cumulative damage of pittings of case hardened gear wheels). Ph.D. thesis TU Munich 1990.
Suchandt, Th.: Betriebsfestigkeitsuntersuchungen zur Zahnfußtragfähigkeit einsatzgehärteter Zahnräder und zur Betriebsfestigkeit vergüteter Laschenketten. (Research on cumulative damage of tooth bending strength of case hardened gear wheels and tempered plate link chains). Ph.D. thesis TU Munich 1994.
Mariutti, H.: Driveline Torque Loads of a Challenger Rubber Belt Tractor. AgEng 2000, Warwick, Proc. II, 160–161. (See also Ph.D thesis TU Munich 2002).
Vahlensieck, B.: Betriebsfeste Auslegung der Antriebstechnik von Landmaschinen. (Cumulative damage dimensioning of agricultural machinery drive lines). Landtechnik 54 (1999), No. 4, 220–221.
Renius, K.Th.: Betriebsfestigkeitsberechnung und Laborerprobung von Zahnrädern in Ackerschleppergetrieben. (Dimensioning and testing of tractor gears by cumulative damage analysis). In: VDI-Bericht 332, 225–234. Düsseldorf: VDI-Verlag 1979.
Höhn, B.-R., K. Michales, and K. Stahl: Maximale Effizienz – Durchführung und Auswertung von Zahntragfähigkeitsversuchen. (Maximum performance – evaluating gear wheel performance through tests). antriebstechnik 45 (2006) H. 11, 60–65.
Hein, M.: Zur ganzheitlichen betriebsfesten Auslegung und Prüfung von Getriebezahnrädern. (Contribution to holistic dimensioning and testing of gear wheels, based on cumulative damage analysis). Ph.D. thesis TU Munich 2018.
Höhn, B.-R., et al.: Zahnfuß-Betriebsfestigkeitsuntersuchungen an einsatzgehärteten Zahnrädern. (Cumulative damage of casehardened gear wheel teeth). antriebstechnik 40 (2001) No. 9, 65–69.
Lüpfert, U.: Ermittlung und Anwendung von Lastkollektiven. (Measurement and application of load spectra). Grundl. Landtechnik 23 (1973) No. 1, 7–10.
[8.31] Chetan, C.R., et al.: Transducers for Measurement of Draft and Torque of Tractor-implement System – A Review. AMA 49 (2018) No. 4, 81–87.
Du Plessis, H.L.M., and T. Yu: The tractive performance of a prototype track based on rubber/soil friction and shear. 13th Internat. ISTVS Conf. Munich 1999, Proceedings I, 217–224.
Schütte, H., and P. Waeltermann: Hardwarein- the-Loop Testing of Vehicle Dynamics Controllers – A Technical Survey. SAE paper 2005-01-1660. Warrendale, PA.: SAE 2005.
Martinus, M.: Funktionale Sicherheit von mechatronischen Systemen bei mobilen Arbeitsmaschinen. (Functional safety of mechatronic systems of mobile machinery). Ph.D. thesis TU Munich 2004. Fortschritt-Ber. VDI, Series 12, No. 586. Düsseldorf: VDI-Verlag 2005.
Walls, J.H., J.C. Houbolt, and H. Press: Some measurements and power spectra of runway roughness. NACA Technical Note 3305, November 1954.
Kozin, F., L.J. Gote, and J.L. Bogdanoff: Statistical studies of stable ground roughness. Report No. 8391, Nov. 1963. Land Locomotion Laboratory US Army Tank Automotive Center, Warren, Michigan.
Braun, H.: Untersuchungen von Fahrbahnunebenheiten und Anwendungen der Ergebnisse. (Research on road profiles and application of the results). Ph.D. thesis TH Braunschweig 1969.
Wendeborn, J.O.: Die Unebenheiten landwirtschaftlicher Fahrbahnen als Schwingungserreger landwirtschaftlicher Fahrzeuge. (Profiles of agricultural roads inducing vibrations of agricultural vehicles). Grundl. Landtechnik 15 (1965) No. 2, 33–64.
Thomas, B.: Künstliche Erzeugung von Straßenprofilen für Simulationszwecke – Anwendung in der Praxis. (Artificial road profiles for simulations and their practical application). In: VDI-MEG Kolloquium Agrartechnik No. 16 (1993), 41–54. HU Berlin and ATB Bornim: Conference Oct. 4 and 5 on the occasion of the retirement of Prof. H. Göhlich, TU Berlin.
Ammon, D., and V. Bormann: Zur Kohärenz zwischen den Unebenheitsanregungen an linker und rechter Fahrspur. (Coherence of road profiles of the left and right traffic lane). In: VDI-Berichte 877, 103 –117. Düsseldorf: VDI-Verlag 1991.
ISO 5008:2002. Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator (contains tables with complete data of the “rougher track” and “smoother track”).
Böhler, H.: Traktormodell zur Simulation der dynamischen Belastungen bei Transportfahrten. (Tractor model for simulation of dynamic loads during transports). Ph.D. thesis TU Munich 2001.Fortschritt-Ber. VDI, Series 14, No. 104. Düsseldorf: VDI-Verlag 2001.
ISO 8608:2016. Mechanical vibration – Road surface profiles – Reporting of measured data.
Gurmai, L.: A comparative analysis of offroad and test track stresses on towed vehicles. Ph.D. thesis Univ. of Gödöllö 2015.
Information of DLG Test Department, Groß Umstadt, 2019.
Other suggested publications:
Gaßner, E.: Betriebsfestigkeit – eine Bemessungsgrundlage für Konstruktionsteile mit statistisch wechselnden Betriebsbeanspruchungen (Cumulative damage analysis – a dimensioning method for machine elements with statistically alternating service stress).
Konstruktion 6 (1954) No. 3, 97–104.
Buxbaum, O.: Betriebsfestigkeit (Cumulative damage in fatigue). Düsseldorf: V. Stahleisen 1992.
Haibach, E.: Betriebsfestigkeit (Cumulative damage in fatigue). 3rd Edition. Heidelberg: Springer-Verlag 2006.
Meiners, H.-H.: Der Einfluß der hydrodynamischen Kupplung auf die Belastungen in einem Ackerschlepper (Influences of a hydrodynamic clutch on tractor loads). Ph.D. thesis TU Braunschweig 1982. Fortschritt-Ber.VDI, Series 14, No. 24. Düsseldorf: VDI-Verlag 1983.
Meiners, H.-H.: Die Beanspruchung einzelner Schlepperaggregate bei unterschiedlichen landwirtschaftlichen Arbeiten (Loads on tractor components during different agricultural operations). Landtechnik 39 (1984) No. 10, 438–441.
Vahlensieck, B.: Messung und Anwendung von Lastkollektiven für einen stufenlosen Kettenwandler- Traktorfahrantrieb (Measurement and application of load spectra for a pull type chain CVT of a tractor). Ph.D. thesis TU Munich 1998. Fortschritt- Berichte VDI, Series 12, No. 385. Düsseldorf: VDI-Verlag 1999.
Kim, J.H., K.U. Kim, and Y.G. Wu: Analysis of transmission load of agricultural tractors. J. of Terramechanics 37 (2000) No. 3, 113–125.
Renius, K.Th.: Random load fatigue in tractor transmissions. Review paper, German-English. Landtechnik 56 (2001) No. 6, 390–391.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Renius, K.T. (2020). Tractor Tests. In: Fundamentals of Tractor Design. Springer, Cham. https://doi.org/10.1007/978-3-030-32804-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-32804-7_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-32803-0
Online ISBN: 978-3-030-32804-7
eBook Packages: EngineeringEngineering (R0)