Abstract
This paper presents a simple methodology for creation of anthropomorphic physical breast phantoms dedicated for x-ray breast imaging. The use of physical phantoms in diagnostic radiology is a well-established approach for patient dose estimation, quality control of developed diagnostic systems and development of new breast imaging techniques. An overview of the design process used for the creation of the presented phantom and evaluation approach is given. A combination of materials (Clear resin, Gray resin and PLA) and methods (fused deposition modelling and stereolithography) are used for the manufacturing of the breast phantom. The phantom was subjected to an evaluation aiming at its suitability for studies with digital mammography technique. In particular, the created phantom was evaluated by using two sets of phantom images, taken using 22 kVp and 28 kVp, which are compared with real mammograms. The comparison of the images is based on extracted statistical parameters – namely skewness, kurtosis, fractals, PSA, GLCMContrast and GLCMEnergy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tomal, A., Costa, P.R.: Chapter 56: Phantoms for image quality and dose assessment. In: Russo, P. (ed.) Handbook of X-ray Imaging: Physics and Technology, pp. 1135–1158. CRC Press, Boca Raton (2018)
Bliznakova, K.: Chapter 57: Software phantoms for x-ray radiography and tomography. In: Russo, P. (ed.) Handbook of X-ray Imaging: Physics and Technology, pp. 1159–1184. CRC Press, Boca Raton 2018
Kiarashi, N., Nolte, A.C., Sturgeon, G.M., Segars, W.P., Ghate, S.V., Nolte, L.W., Samei, E., Lo, J.Y.: Development of realistic physical breast phantoms matched to virtual breast phantoms based on human subject data. Med. Phys. 42, 4116–4126 (2015)
Carton, A.K., Bakic, P., Ullberg, C., Derand, H., Maidment, A.D.: Development of a physical 3D anthropomorphic breast phantom. Med. Phys. 38, 891–896 (2011)
Bosmans, H., Bliznakova, K., Padovani, R., et al.: Eutempe-RX: a new EC supported course for medical physics experts in radiology. Phys. Medica 30(Supplement 1), e11 (2014)
Bosmans, H., Bliznakova, K., Padovani, R., et al.: EUTEMPE-RX, an EC supported FP7 project for the training and education of medical physics experts in radiology. Radiat. Prot. Dosimetry. 165, 518–522 (2015)
Bliznakova, K., Buliev, I., Bosmans, H., et al.: How can biomedical engineers benefit from the new expert level course of the EUTEMPE-RX project. In: 6th European Conference of the International Federation for Medical and Biological Engineering, vol. 45, pp. 765–768 (2015)
Bliznakova, K.: Development of breast software phantom dedicated for research and educational purposes. Radiat. Appl. Phys. Chem. Biol. Med. Sci. Eng. Environ. Sci. 2, 14–19 (2016)
Ikejimba, L.C., Graff, C.G., Rosenthal, S., et al.: A novel physical anthropomorphic breast phantom for 2D and 3D x-ray imaging. Med. Phys. 44, 407–416 (2017)
Ivanov, D., Bliznakova, K., Buliev, I., et al.: Suitability of low density materials for 3D printing of physical breast phantoms. Phys. Med. Biol. 63, 175020 (2018)
Esposito, G., Mettivier, G., Bliznakova, K., et al.: Investigation of the refractive index decrement of 3D printing materials for manufacturing breast phantoms for phase contrast imaging. Phys. Med. Biol. 64 (2019)
Bliznakova, K., Suryanarayanan, S., Karellas, A., Pallikarakis, N.: Evaluation of an improved algorithm for producing realistic 3D breast software phantoms: application for mammography. Med. Phys. 37, 5604–5617 (2010)
Bliznakova, K., Sechopoulos, I., Buliev, I., Pallikarakis, N.: BreastSimulator: a software platform for breast x-ray imaging research. J. Biomed. Graph. Comput. 2, 1–14 (2012)
Imran, A.A.Z., Bakic, P.R., Pokrajac, D.D.: Spatial distribution of adipose compartments size, shape and orientation in a CT breast image of a mastectomy specimen. In: 2015 IEEE Signal Processing in Medicine and Biology Symposium - Proceedings (2015)
Imran, A.A., Pokrajac, D.D., Maidment, A.D.A., Bakic, P.R.: Estimation of adipose compartment volumes in CT images of a mastectomy specimen. In: Medical Imaging 2016: Physics of Medical Imaging, vol. 9783 (2016)
Marinov, S., Buliev, I., Cockmartin, L., et al.: Development of a software tool for evaluation of x-ray images: a case study in breast imaging. In: World Congress on Medical Physics and Biomedical Engineering, IUPESMPrague, p. 218, 3–8 June 2018
MathWorks: Matlab-MathWorks (2016)
Acknowledgements
This research is supported by the Bulgarian National Science Fund under grant agreement DN17/2.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Feradov, F., Marinov, S., Bliznakova, K. (2020). Physical Breast Phantom Dedicated for Mammography Studies. In: Henriques, J., Neves, N., de Carvalho, P. (eds) XV Mediterranean Conference on Medical and Biological Engineering and Computing – MEDICON 2019. MEDICON 2019. IFMBE Proceedings, vol 76. Springer, Cham. https://doi.org/10.1007/978-3-030-31635-8_41
Download citation
DOI: https://doi.org/10.1007/978-3-030-31635-8_41
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-31634-1
Online ISBN: 978-3-030-31635-8
eBook Packages: EngineeringEngineering (R0)