Abstract
In this work, the kinematic analysis of a parallel robot via screw theory is obtained step by step, with the aim to show details that no-one mentions since only a select group of researchers has the know-how of this mathematical tool. A 3-RRR parallel robot for obtaining the input-output equations of velocity and acceleration in screw form is used. A brief explanation of concepts used by applying screw theory in the kinematic analysis of parallel robots is provided. The Klein form, which is an important method for addressing the passive joints of the parallel manipulators, is applied to the velocity and acceleration equations of the robot. A numerical example in order to verify the kinematics formulation of the parallel manipulator based on screw theory is provided. With the details mentioned in this paper, to understand and apply this mathematical tool could be easier and simply than learning it by it-self.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ball, R.S.: Treatise on the Theory of Screws. Cambridge University Press, New York (1900). Reprint 1998
Brand, L.: Vector and Tensor Analysis. Wiley, New York (1947)
Mohamed, M.G., Duffy, J.: A direct determination of the instantaneous kinematics of fully parallel robot manipulators. ASME J. Mech. Transm. Autom. Des. 107(2), 226–229 (1985)
Rico, J.M., Gallardo, J., Duffy, J.: Screw theory and higher order kinematic analysis of open serial and closed chains. Mech. Mach. Theory 34, 559–586 (1999)
Bonev, L.A., Zlatanov, D., Gosselin, C.M.: Singularity analysis of a 3-DOF planar parallel mechanism via screw theory. ASME J. Mech. Des. 125(3), 573–581 (2003)
Tsai, L.-W.: Robot Analysis. Wiley, New York (1999)
Kong, X., Gosselin, C.M.: Type synthesis of a 3-DOF spherical parallel manipulators based on screw theory. ASME J. Mech. Des. 126(1), 101–108 (2004)
Kong, X., Gosselin, C.M.: Type synthesis of a 3-DOF translational parallel manipulators based on screw theory. ASME J. Mech. Des. 126(1), 83–92 (2004)
Kong, X., Gosselin, C.M.: Type synthesis of a 3T1R 4-DOF parallel manipulators based on screw theory. ASME J. Mech. Des. 20(2), 181–190 (2004)
Gallardo-Alvarado, J., Rico-Martínez, J., Alici, G.: Kinematics and singularity analyses of a 4-DOF parallel manipulator using screw theory. Mech. Mach. Theory 41, 1048–1061 (2006)
Gallardo-Alvarado, J., et al.: Kinematics of a class of parallel manipulators which generates structures with three limbs. Multibody Syst. Dyn. 17(1), 27–46 (2007)
Gallardo, J., Rodríguez, R., Caudillo, M., Rico, J.M.: A family of spherical parallel manipulators with two legs. Mech. Mach. Theory 43(2), 201–216 (2008)
Gallardo-Alvarado, J., García-Murillo, M.A., Castillo-Castaneda, E.: A 2(3-RRPS) parallel manipulator inspired by Gough-Stewart platform. Robotica 31(03), 381–388 (2012)
García-Murillo, M.A., Gallardo-Alvarado, J., Castillo-Castaneda, E.: Finding the generalized forces of a series-parallel manipulator. Int. J. Adv. Robot. Syst. 10(4) (2013)
Maldonado-Echegoyen, R., Castillo-Castaneda, E., García-Murillo, M.A.: Kinematic and deformation analyses of a translational parallel robot for drilling task. J. Mech. Sci. Technol. 29(10), 4437–4443 (2015)
Garcia-Murillo, M.A., et al.: Kinematics and Dynamics of a 3-RPSR Parallel Robot Used as a Pipe-Bending Machine. In: Lenarčič, J., Khatib, O. (eds.) Advances in Robot Kinematics, pp. 307–316. Springer, Cham (2014)
Takeda, Y., et al.: Kinematic design of 3-RPSR parallel mechanism for movable-die drive mechanism of pipe bender. Rom. J. Tech. Sci. Appl. Mech. 58(1–2), 71–96 (2013)
Gallardo-Alvarado, J., Balmaceda-Santamaría, A.L., Castillo-Castaneda, E.: An application of screw theory to the kinematic analysis of a Delta-type robot. J. Mech. Sci. Technol. 28(9), 3785–3792 (2014)
Balmaceda-Santamaría, A.L., Castillo-Castaneda, E., Gallardo-Alvarado, J.: A novel reconfiguration strategy of a Delta-type parallel manipulator. Int. J. Adv. Robot. Syst. 13(15), 11 pages (2016)
Gallardo-Alvarado, J.: Kinematics of a hybrid manipulator by means of screw theory. Multibody Syst. Dyn. 14, 345–366 (2005)
Gallardo-Alvarado, J., Orozco, H., Rico, J.M.: Kinematics of 3-RPS parallel manipulators by means of screw theory. Int. J. Adv. Manuf. Technol. 36, 598–605 (2008)
Gallardo-Alvarado, J., et al.: Kinematics and dynamics of 2(3-RPS) manipulators by means of screw theory and principle of virtual work. Mech. Mach. Theory 43, 1281–1294 (2008)
Gallardo-Alvarado, J., Arroyo-Ramírez, B., Rojas-Garduño, H.: Kinematics of a five-degrees-of-freedom parallel manipulator using screw theory. Int. J. Adv. Manuf. Technol. 45, 830–840 (2009)
Gallardo-Alvarado, J.: Kinematic Analysis of Parallel Manipulators by Algebraic Screw Theory, 1st edn. Springer, Cham (2016)
Chasles, M.: Notes on the general properties of a system of 2 identical bodies randomly located in space; and on the finite or infinitesimal motion of a free solid body. Bulletin des Sciences Mathematiques, Astronomiques, Physiques et Chimiques 14, 321–326 (1830)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Balmaceda-Santamaría, A.L., García-Murillo, M.A. (2020). Kinematics of a Planar Parallel Robot via Screw Theory: Details not Mentioned. In: Kuo, CH., Lin, PC., Essomba, T., Chen, GC. (eds) Robotics and Mechatronics. ISRM 2019. Mechanisms and Machine Science, vol 78. Springer, Cham. https://doi.org/10.1007/978-3-030-30036-4_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-30036-4_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30035-7
Online ISBN: 978-3-030-30036-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)