Abstract
In this paper, we present the results from a series of plate impact experiments designed to study dynamic response of commercial 99.6% purity tungsten carbide (WC) under simultaneous compression-and-shear stress wave loading. The symmetric oblique plate-impact experiments are conducted using progressively increasing angles of inclination (5°, 10°, and 22°). The longitudinal and transverse components of the measured particle velocity history at the free surface of the target plate in experiments with inclination angles of up to 10° and impact velocities ~100 m/s coincide well with their corresponding elastic particle velocity predictions. However, the normal particle velocity profiles for experiments conducted at an oblique impact angle of 22° are markedly different and exhibit a sudden increase in particle velocity from their plateau levels reminiscent of failure waves observed by other investigators in soda lime glass and silicon carbide (SIC-B). The increase in normal particle velocity (recompression/re-acceleration signal) in the shocked state of the target and the relatively large undulations present in the measured transverse particle velocity profiles are indicative of heterogeneous dynamic brittle failure processes in WC under the simple-shear state of stress, and are used to provide estimates for the critical range of pure-shear (tensile) loading that can initiate catastrophic failure in pure WC.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Appleby-Thomas, G., et al.: Shock propagation in a cemented tungsten carbide. J. Appl. Phys. 105(6), 064916 (2009)
Zhu, D., Kriven, W.M.: Advances in Ceramic Armor: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, Jan 23–28, 2005, Cocoa Beach, FL, vol. 296. John Wiley & Sons, Hoboken (2009)
Yadav, S., Ramesh, K.: The mechanical properties of tungsten-based composites at very high strain rates. Mater. Sci. Eng. A. 203(1–2), 140–153 (1995)
Grady, D.: Impact failure and fragmentation properties of tungsten carbide. Int. J. Impact Eng. 23(1), 307–317 (1999)
Kurlov, A.S., Gusev, A.I.: Tungsten carbides. Springer Series Materials Science. 184, 34–36 (2013)
Kosolapova, T.Y.: Carbides: properties, production, and applications. Springer Science & Business Media, Berlin (2012)
Prakash, V.: Time-resolved friction with applications to high speed machining: experimental observations. Tribol. Trans. 41(2), 189–198 (1998)
Frutschy, K., Clifton, R.: High-temperature pressure-shear plate impact experiments using pure tungsten carbide impactors. Exp. Mech. 38(2), 116–125 (1998)
Yuan, F., Prakash, V., Lewandowski, J.J.: Shear yield and flow behavior of a zirconium-based bulk metallic glass. Mech. Mater. 42(3), 248–255 (2010)
Grunschel, S., Clifton, R.J., Jiao, T.: Shearing resistance of aluminum at high strain rates and at temperatures approaching melt. in AIP Conference Proceedings. AIP, College Park (2012)
Yuan, F.P., Prakash, V., Lewandowski, J.J.: Spall strength of a zirconium-based bulk metallic glass under shock-induced compress ion-and-shear loading. Mech. Mater. 41(7), 886–897 (2009)
Prakash, V., Yuan, F.: Results of a pilot study to investigate the feasibility of using new experimental techniques to measure sliding resistance at seismic slip rates. EOS Trans. AGU Fall Meeting Suppl. 85(47), 435 (2004)
Exner, H.: Physical and chemical nature of cemented carbides. Int. Met. Rev. 24(1), 149–173 (1979)
Samsonov, G.V.: Refractory carbides. Consultants Bureau, New York (1974)
Storms, E.K.: The refractory carbides. Academic, New York (1967)
Marsh, S.P.: LASL Shock Hugoniot data, vol. 5. Univ of California Press, Berkeley (1980)
Grady, D.E., Moody, R.L.: Shock compression profiles in ceramics. Sandia National Labs, Albuquerque, NM (1996)
Lee, H.-C., Gurland, J.: Hardness and deformation of cemented tungsten carbide. Mater. Sci. Eng. 33(1), 125–133 (1978)
Millett, J., Bourne, N., Dandekar, D.: Lateral stress measurements and shear strength in shock loaded tungsten carbide. J. Appl. Phys. 96(7), 3727–3732 (2004)
Bolton, J., Redington, M.: Plastic deformation mechanisms in tungsten carbide. J. Mater. Sci. 15(12), 3150–3156 (1980)
Prakash, V., Clifton, R.J.: Experimental and analytical investigation of dynamic fracture under conditions of plane strain. in Fracture Mechanics: Twenty-Second Symposium, (1990)
Liou, N.-S., Okada, M., Prakash, V.: Formation of molten metal films during metal-on-metal slip under extreme interfacial conditions. J. Mech. Phys. Solids. 52(9), 2025–2056 (2004)
Yuan, F., Liou, N.-S., Prakash, V.: High-speed frictional slip at metal-on-metal interfaces. Int. J. Plast. 25(4), 612–634 (2009)
Tsai, L., Prakash, V.: Structure of weak shock waves in 2-D layered material systems. Int. J. Solids Struct. 42(2), 727–750 (2005)
Prakash, V., Clifton, R.J.: Experimental and Analytical Investigations of Dynamic Fracture under Conditions of Plane-Strain. In: Ernst, H.A., Saxena, A., McDowell, D.A. (eds.) Fracture Mechanics: Twenty Second Symposium (vol. 1) ASTM STP 1131, pp. 412–444. American Society of Testing Materials, Philadelphia, PA (1992)
Zuanetti, B., Wang, T., Prakash, V.: A compact fiber optics-based heterodyne combined normal and transverse displacement interferometer. Rev. Sci. Instrum. 88(3), 033108 (2017)
Zuanetti, B., Wang, T., Prakash, V.: A Novel Approach for Plate Impact Experiments to Obtain Properties of Materials Under Extreme Conditions. In: Dynamic Behavior of Materials, vol. 1, pp. 19–26. Springer, Berlin (2019)
Bless, S.J., et al.: Failure waves in glass. J. Am. Ceram. Soc. 75(4), 1002–1004 (1992)
Dandekar, D.P., Beaulieu, D.: Failure wave under shock wave compression in soda-lime glass. In: Murr, L.E., Staudhammer, K.P., Meyers, M.A. (eds.) Mettalurgical and Materials Applications of Shock wave and High Strain Rate Phenomena, pp. 211–218. Elsevier, New York (1995)
Dandekar, D.P.: Spall strength of silicon carbide under normal and simultaneous compression-shear shock wave loading. Int. J. Appl. Ceram. Technol. 1(3), 261–268 (2004)
Zuanetti, B., Wang, T., Prakash, V.: Plate impact investigation of the dynamic response of commercial tungsten carbide under shock-induced compression and combined compression-and-shear loading. Int. J. Imp. Eng. Manuscript sumbitted for publication, (2019)
Acknowledgements
The authors would like to acknowledge the financial support of the U.S. Department of Energy through the Stewardship Science Academic Alliance (DE-NA0001989 and DE-NA0002919) in conducting the present research.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Zuanetti, B., Wang, T., Prakash, V. (2020). Dynamic Failure of Pure Tungsten Carbide Under Simultaneous Compression and Shear Plate Impact Loading. In: Lamberson, L. (eds) Dynamic Behavior of Materials, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-030-30021-0_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-30021-0_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30020-3
Online ISBN: 978-3-030-30021-0
eBook Packages: EngineeringEngineering (R0)