Abstract
Aluminium-air battery have high energy density, for example 8100 Wh kg−1 capable of replacing classical lithium based batteries. However, the presence of parasitic reactions during the discharge process causes reducing the lifetime of the aluminium-air battery. Organic inhibitors are able to prevent the parasitic reaction, but it is likely to effect the battery performance. The aim of this research is to study the effect of acetone as an inhibitor at aluminium-air battery. Density functional theory (DFT) with B3LYP functional and 6-311G(d,p) basis set was conducted to determine the inhibitor efficiency of acetone. Besides, the aluminium-air battery was developed and tested to identify battery performances by applying acetone with different concentrations (0, 2, 4, 6, and 8 mM). Results show that increasing the acetone concentration will improve the inhibitor’s efficiency from 12.5 to 50.0%. Further, the capacity of the battery can be increased with the inhibitor concentration. It is observed that the battery capacity using acetone (8 mM) is 0.028 Ah better than for a battery without acetone, 0.023 Ah. Therefore, acetone can be considered as an inhibitor capable of preventing severe corrosion against aluminium alloys and produces a good performance of aluminium-air batteries.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gelman, D., et al.: An aluminum—ionic liquid interface sustaining a durable Al-air battery. J. Power Sources 364, 110–120 (2017)
Pino, M., et al.: Performance of commercial aluminium alloys as anodes in gelled electrolyte aluminium-air batteries. J. Power Sources 299, 195–201 (2015)
Liu, Y., et al.: A comprehensive review on recent progress in aluminum-air batteries. Green Energy Environ. 2, 246–277 (2017)
Moghadam, Z., et al.: Electrochemical performance of aluminium alloy in strong alkaline media by urea and thiourea as inhibitor for aluminium-air batteries. J. Mol. Liq. 242, 971–978 (2017)
Park, I.J., et al.: Aluminum anode for aluminum-air battery—Part II: influence of In addition on the electrochemical characteristics of Al–Zn alloy in alkaline solution. J. Power Sources 357, 47–55 (2017)
Fouda, A.S., Mohamed, N.H.: Corrosion inhibition of aluminum in hydrochloric acid solutions using some. Int. J. Electrochem. Sci. 3, 9861–9875 (2014)
Cho, Y.J., et al.: Aluminum anode for aluminum-air battery—Part I: influence of aluminum purity. J. Power Sources 277, 370–378 (2015)
Yasakau, K.A., Zheludkevich, M.L., Ferreira, M.G.S,: Corrosion and Corrosion Protection of Aluminum Alloys. Elsevier (2017)
Han, B., Liang, G.: Neutral electrolyte aluminum air battery with open configuration. Rare Met. 25, 360–363 (2006)
Nie, Y., et al.: An effective hybrid organic/inorganic inhibitor for alkaline aluminum-air fuel cells. Electrochim. Acta 248, 478–485 (2017)
Avoundjian, A., Galvan, V., Gomez, F.A.: An inexpensive paper-based aluminum-air battery. Micromachines 8, 222 (2017)
Kharitonov, D.S., Kurilo, I.I., Zharskii, I.M.: Effect of sodium vanadate on corrosion of AD31 aluminum alloy in acid media. Russ. J. Appl. Chem. 90, 1089–1097 (2017)
Camila, G., Alexandre, F.: Corrosion Inhibitors—Principles, Mechanisms and Applications. Developments in Corrosion Protection (2014)
Al-Sodani, K.A.A., et al.: Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration. Constr. Build. Mater. 163, 97–112 (2018)
Goyal, M., et al.: Organic corrosion inhibitors for industrial cleaning of ferrous and non-ferrous metals in acidic solutions: a review. J. Mol. Liq. 256, 565–573 (2018)
Saratha, R., Meenakshi, R.: Dimethylaminobenzylidene acetone as corrosion inhibitor for mild steel in acid medium. Rasayan J. Chem. 4, 251–263 (2011)
Yadav, M., et al.: Substituted imidazoles as corrosion inhibitors for N80 steel in hydrochloric acid. Indian J. Chem. Technol. 20, 363–370 (2013)
Wang, H., et al.: DFT study of new bipyrazole derivatives and their potential activity as corrosion inhibitors. J. Mol. Model. 13, 147–153 (2007)
Raghavendra, N., Ishwara, B.J.: Inhibition of Al corrosion in 0.5 M HCl solution by Areca flower extract. J. King Saud Univ. Eng. Sci. (2018)
Fateh, A., et al.: Review of corrosive environments for copper and its corrosion inhibitors. Arab. J. Chem. (2017)
Obot, I.B., et al.: Density functional theory (DFT) as a powerful tool for designing new organic corrosion inhibitors: Part 1: an overview. Corros. Sci. 99, 1–30 (2015)
Obayes, H.R., et al.: Sulphonamides as corrosion inhibitor: experimental and DFT studies. J. Mol. Struct. 1138, 27–34 (2017)
Wang, Y., et al.: Density functional theory analysis of structural and electronic properties of orthorhombic perovskite CH3 NH3 PbI3. Phys. Chem. Chem. Phys. 16, 1424–1429 (2014)
Toy, M., Tanak, H.: Molecular structure and vibrational and chemical shift assignments of 3′-chloro-4-dimethylamino azobenzene by DFT calculations. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 152, 530–536 (2016)
Efil, K., Obot, I.B.: Quantum chemical investigation of the relationship between molecular structure and corrosion inhibition efficiency of benzotriazole and its alkyl-derivatives on iron. Prot. Met. Phys. Chem. Surf. 53, 1139–1140 (2017)
Zarrouk, A., et al.: A theoretical study on the inhibition efficiencies of some quinoxalines as corrosion inhibitors of copper in nitric acid. J. Saudi Chem. Soc. 18, 450–455 (2014)
Rostami, Z., et al.: DFT results against experimental data for electronic properties of C60 and C70 fullerene derivatives. J. Mol. Graph. Model. 81, 60–67 (2018)
Kim, K.H., et al.: Basis set effects on relative energies and HOMO-LUMO energy gaps of fullerene C36. Theor. Chem. Acc. 113, 233–237 (2005)
El Mahdy, A.M., et al.: DFT and TD-DFT calculations of metallotetraphenylporphyrin and metallotetraphenylporphyrin fullerene complexes as potential dye sensitizers for solar cells. J. Mol. Struct. 1160, 415–427 (2018)
Mokhtar, M., et al.: Recent developments in materials for aluminum-air batteries: a review. J. Ind. Eng. Chem. 32, 1–20 (2015)
Davis, J.R.: Aluminum and aluminum alloys. Light Met. Alloy. 66 (2018)
Montes, V., Hill, J.M.: Activated carbon production: recycling KOH to minimize waste. Mater. Lett. 220, 238–240 (2018)
Zhang, E., et al.: Durability and regeneration of activated carbon air-cathodes in long-term operated microbial fuel cells. J. Power Sources 360, 21–27 (2017)
Cheng, S., Wu, J.: Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells. Bioelectrochemistry 92, 22–26 (2013)
Yang, W., et al.: A simple method for preparing a binder-free paper-based air cathode for microbial fuel cells. Bioresour. Technol. 241 (2017)
Hu, K., et al.: Influence of biomacromolecule DNA corrosion inhibitor on carbon steel. Corros. Sci. 125, 68–76 (2017)
Sardar, N., Ali, H.: A study of some new acidizing inhibitors on corrosion of N-80 alloy in 15% boiling hydrochloric acid. Corrosion 58, 317–321 (2002)
Ayati, N.S., et al.: Inhibitive effect of synthesized 2-(3-pyridyl)-3,4-dihydro-4-quinazolinone as a corrosion inhibitor for mild steel in hydrochloric acid. Mater. Chem. Phys. 126, 873–879 (2011)
Balachandran, V., et al.: Conformational stability, spectroscopic (FT-IR & FT-Raman), HOMO-LUMO, NBO and thermodynamic function of 4-(trifloromethoxy) phenol. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 130, 367–375 (2014)
Egan, D.R., et al.: Developments in electrode materials and electrolytes for aluminiumeair batteries. J. Power Sources 236, 293–310 (2013)
Bösing, I., et al.: Electrolyte Composition for distinguishing corrosion mechanisms in steel alloy screening. Int. J. Corros. (2017)
Mainar, A.R., et al.: An overview of progress in electrolytes for secondary zinc-air batteries and other storage systems based on zinc. J. Energy Storage 15, 304–328 (2018)
Acknowledgements
The authors would like to thank the STRG program [grant number str17065] and are grateful for the support given from the Yayasan Tengku Abdullah Scholarship (YTAS) under Universiti Kuala Lumpur and System Engineering and Energy Laboratory (SEELab).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Mohd-Kamal, MS., Abu Bakar, M.H., Yaacob, S. (2019). Study the Effect of Acetone as an Inhibitor for the Performance of Aluminium-Air Batteries. In: Abu Bakar, M., Mohamad Sidik, M., Öchsner, A. (eds) Progress in Engineering Technology. Advanced Structured Materials, vol 119. Springer, Cham. https://doi.org/10.1007/978-3-030-28505-0_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-28505-0_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-28504-3
Online ISBN: 978-3-030-28505-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)