Abstract
As customers’ options for configuring products to match their requirements increase, the number of assembly variants grows. Due to this large number of variants, assembly processes often cannot be automated in an economical way, and manual assembly remains highly important. Additional support options must be implemented to continue completing manual assembly processes reliably in the future. Image processing systems are one promising approach. The purpose of this paper is to establish the potential offered by industrial image processing in manual assembly, building on fundamental concepts, as well as to identify requirements and provide recommendations for selecting and arranging system components.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bächler, A., Bächler, L., Kurtz, P., Krüll, T., Heidenreich, T., Autenrieth, S.: Assistenzsysteme für manuelle Industrieprozesse. In: Weidner, R., Redlich, T., Wulfsberg, J.P. (eds.) Technische Unterstützungssysteme, pp. 206–207. Springer, Heidelberg (2015)
Bornewasser, M., Bläsing, D., Hinrichsen, S.: Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, 264–275 (2018)
Falck, A.-C., Örtengren, R., Rosenqvist, M.: Assembly failures and action cost in relation to complexity level and assembly ergonomics in manual assembly (part 2). Int. J. Ind. Ergon. 44(3), 455–459 (2014)
Bretschneider, J., Haider, H., Keinath, M.: Kameratechnik und digitale Bildverarbeitung. In: Neumann, H., Schröder, G., Löffler-Mang, M. (eds.) Handbuch Bauelemente der Optik, pp. 553–592. Hanser, München (2014)
Berndt, D.: Montage-Arbeitsplatz – Visuelle Assistenz und optische Prüfung. In: Schenk, M. (ed.) Produktion und Logistik mit Zukunft, pp. 84–108. Springer, Heidelberg (2015)
Eichin, D.: Modellbasiertes Konzept zur vollautomatisierten MontageprĂĽfung von asynchron angetriebenen Getriebemotoren im lastlosen Zustand. In: Schriftenreihe des Instituts fĂĽr Angewandte Informatik, Automatisierungstechnik, Karlsruher Institut fĂĽr Technologie, Band 51. KIT Scientific Publishing, Karlsruhe (2015)
Beyerer, J., Puente LeĂłn, F., Frese, C.: Automatische SichtprĂĽfung. Springer, Heidelberg (2016)
Kuroda, T.: Essential Principles of Image Sensors. CRC Press, Boca Raton (2016)
Bauer, M.: Kamera Kaufberatung: Was man vor dem Kauf unbedingt wissen sollte. Books on Demand, Norderstedt (2016)
Erhardt, A.: EinfĂĽhrung in die Digitale Bildverarbeitung. Vieweg und Teubner, Wiesbaden (2008)
Holst, K.: Beleuchtung für die industrielle Bildverarbeitung. In: Weissler, G.A. (ed.) Einführung in die industrielle Bildverarbeitung, pp. 23–66. Franzis, Poing (2007)
Görner, B.: Beleuchtung von Arbeitsstätten – Stand der Regelsetzung. Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Dortmund, Berlin, Dresden (2008)
Demant, C., Streicher-Abel, B., Springhoff, A.: Industrielle Bildverarbeitung: Wie optische Qualitätskontrolle wirklich funktioniert. Springer, Heidelberg (2011)
DIN, EN. 62471: Photobiologische Sicherheit von Lampen und Lampensystemen. Deutsches Institut fĂĽr Normung und Beuth, Berlin (2009)
Acknowledgment
The authors acknowledge the financial support by the Federal Ministry of Education and Research of Germany (BMBF) and the European Social Fund (ESF) in the project Montexas4.0 (FKZ Grant no. 02L15A260).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Nikolenko, A., Hinrichsen, S. (2020). Potential of Industrial Image Processing in Manual Assembly. In: Ahram, T., Karwowski, W., Pickl, S., Taiar, R. (eds) Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, vol 1026. Springer, Cham. https://doi.org/10.1007/978-3-030-27928-8_121
Download citation
DOI: https://doi.org/10.1007/978-3-030-27928-8_121
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27927-1
Online ISBN: 978-3-030-27928-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)